Indexed INScopus

COMPARATIVE AND PARAMETRIC STUDY OF EFFECT OF EXHAUST GAS RECIRCULATION ON DIESEL AND BIODIESEL

Conference

Title of PaperCOMPARATIVE AND PARAMETRIC STUDY OF EFFECT OF EXHAUST GAS RECIRCULATION ON DIESEL AND BIODIESEL

Proceeding NameICIEEE

Published YearJanuary 2016

DESIGNING AND MANUFACTURING OF CONTINUOUSLY VARIABLE TRANSMISSION (CVT)

Conference

Title of PaperDESIGNING AND MANUFACTURING OF CONTINUOUSLY VARIABLE TRANSMISSION (CVT)

Proceeding NameICFTET

Published YearDecember 2015

LOW VOLTAGE SYSTEMS FOR ELECTRIC ATVS

Journal

Journal NameIEEE XPLORE

Title of PaperLOW VOLTAGE SYSTEMS FOR ELECTRIC ATVS

PublisherIEEE XPLORE

Published YearOctober 2023

Indexed INScopus

ADAPTIVE INTERFACE-MESH UN-REFINEMENT (AIMUR) BASED SHARP-INTERFACE LEVEL-SET-METHOD FOR TWO-PHASE FLOW

Journal

Journal NameSadhana

Title of PaperADAPTIVE INTERFACE-MESH UN-REFINEMENT (AIMUR) BASED SHARP-INTERFACE LEVEL-SET-METHOD FOR TWO-PHASE FLOW

Published YearJuly 2023

Indexed INScopus, Web of Science

A NUMERICAL STUDY ON BREAKUP OF A LIQUID JET IN AN AXIAL ELECTRIC FIELD

Journal

Journal NameJOURNAL OF AEROSOL SCIENCE

Title of PaperA NUMERICAL STUDY ON BREAKUP OF A LIQUID JET IN AN AXIAL ELECTRIC FIELD

PublisherElsevier

Published YearMay 2023

Indexed INScopus, Web of Science

GENERATIVE DESIGN OF MAIN LANDING GEAR FOR A REMOTE-CONTROLLED AIRCRAFT

Journal

Journal NameMaterial Today

Title of PaperGENERATIVE DESIGN OF MAIN LANDING GEAR FOR A REMOTE-CONTROLLED AIRCRAFT

PublisherElsevier

Journal

Journal NameAdvanced Engineering Materials

Title of PaperAdvanced Engineering Materials

PublisherWiley

Volume Number24

Published YearJanuary 2022

ISSN/ISBN No1527-2648

Indexed INScopus, Web of Science

Application of optical techniques in sedimentation study of magnetorheological fluids

Journal

Journal NameInternational Journal of Nanotechnology

Title of PaperApplication of optical techniques in sedimentation study of magnetorheological fluids

PublisherInderscience online

Volume Number18

Page Number941-950

Published YearNovember 2021

ISSN/ISBN No1741-8151

Indexed INScopus, Web of Science

The examination, evaluation and comparison of corrosion effect on different metal surface by various crops based biodiesel

Journal

Journal NameProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

Title of PaperThe examination, evaluation and comparison of corrosion effect on different metal surface by various crops based biodiesel

PublisherSAGE

Volume Number235

Published YearNovember 2020

ISSN/ISBN No2041-2983

Indexed INScopus

Methods for sedimentation study of magnetorheological fluids

Journal

Journal NameMaterials Today: Proceedings

Title of PaperMethods for sedimentation study of magnetorheological fluids

PublisherElsevier

Volume Number28

Page Number40-44

Published YearMarch 2020

ISSN/ISBN No2214-7853

Indexed INScopus

Synthesis, characterization and applications of magnetorheological fluid

Conference

Title of PaperSynthesis, characterization and applications of magnetorheological fluid

Proceeding NameTechnologies for Sustainable Development - Proceedings of the 7th Nirma University International Conference on Engineering, NUICONE 2019

PublisherCRC Press/Balkema

Author NamePrajapati, Hiren, Lakdawala, Absar

OrganizationNirma University

Year , VenueNovember 2019 , Nirma University

Page Number306 - 311

ISSN/ISBN No978-036733737-7

Indexed INScopus

A numerical study on bubble dynamics in sinusoidal channels

Journal

Journal NamePhysics of Fluids

Title of PaperA numerical study on bubble dynamics in sinusoidal channels

PublisherAIP Publishing

Volume Number31

Page Number052103

Published YearMay 2019

ISSN/ISBN No1089-7666

Indexed INScopus, Web of Science

A numerical study on bubble dynamics in sinusoidal channels

Journal

Journal NamePhysics of Fluid

Title of PaperA numerical study on bubble dynamics in sinusoidal channels

PublisherAmerican Institute of Physics

Volume Number31

Page Number052103

Published YearMay 2019

ISSN/ISBN No1070-6631

Indexed INScopus, Web of Science

Altmetric Original Articles Coupled level-set and immersed-boundary method for simulation of filling in a complex geometry based mold

Journal

Journal NameNumerical Heat Transfer, Part B: Fundamentals

Title of Paper Altmetric Original Articles Coupled level-set and immersed-boundary method for simulation of filling in a complex geometry based mold

PublisherTaylor and Francis

Volume Number74

Published YearMarch 2019

ISSN/ISBN No1521-0626

Indexed INScopus, Web of Science

Coupled level-set and immersed-boundary method for simulation of filling in a complex geometry based mold

Journal

Journal NameNumr. Heat Transfer Part B,

Title of PaperCoupled level-set and immersed-boundary method for simulation of filling in a complex geometry based mold

PublisherTaylor & Francis

Volume Number74, Issue 6,

Page Number861-882

Published YearMarch 2019

ISSN/ISBN No1521-0626

Indexed INScopus, Indian citation Index

Hydrodynamic Analysis of Fish-Like Locomotion

Conference

Title of PaperHydrodynamic Analysis of Fish-Like Locomotion

Proceeding Name7th International Conference on Fluid Mechanics and Fluid Power

Author NameMakwana, A., Thakkar, N., Lakdawala, A.,

OrganizationIIT Bombay

Year , VenueDecember 2018 , IIT Bombay

Level Set Method based Study on Solidification During Casting: Effect of Advection and Filling Process

Conference

Title of PaperLevel Set Method based Study on Solidification During Casting: Effect of Advection and Filling Process

Proceeding NameFifth International Conference on Computational Methods for Thermal Problems THERMACOMP2018

Author NameThakkar, N., Sharma, A., Lakdawala, A.,

OrganizationIndian Institute of Science, Bangalore, INDIA

Year , VenueJuly 2018 , Indian Institute of Science, Bangalore, INDIA

Indexed INScopus

Study on tribological behavior of biodiesel – Diethyl ether (B20A4) blend for long run test on compression ignition engine

Journal

Journal NameFuel

Title of PaperStudy on tribological behavior of biodiesel – Diethyl ether (B20A4) blend for long run test on compression ignition engine

PublisherElsevier

Volume Number230

Page Number64-77

Published YearMarch 2018

ISSN/ISBN No0016-2361

Indexed INScopus, Web of Science

A dual grid, dual level set based cut cell immersed boundary approach for simulation of multi-phase ﬂow

Journal

Journal NameChemical Engineering Science

Title of PaperA dual grid, dual level set based cut cell immersed boundary approach for simulation of multi-phase ﬂow

PublisherElsevier

Volume Number177

Page Number180-194

Published YearJanuary 2018

ISSN/ISBN No0009-2509

Indexed INScopus, Web of Science

Dual-Grid Level Set Method based CMFD Application for Solving Casting Filling and Solidification process

Conference

Title of PaperDual-Grid Level Set Method based CMFD Application for Solving Casting Filling and Solidification process

Proceeding NameInternational ISHMT-ASTFE, Heat and Mass Transfer Conference (IHMTC-2017)

Author NameThakkar, N., Sharma, A., Lakdawala, A.,

OrganizationBITS Pilani and IIT Hyderabad, Hyderabad, India

Year , VenueDecember 2017 , BITS Pilani Hyderabad, India

Experimental Investigation on Reduction of NOx Emission of Compression Ignition Engine Fueled with Bio-Diesel and Di-ethyl Ether (DEE)

Journal

Journal NameInternational Journal of Global Warming

Title of PaperExperimental Investigation on Reduction of NOx Emission of Compression Ignition Engine Fueled with Bio-Diesel and Di-ethyl Ether (DEE)

PublisherInderscience

Volume Number11 Issue 4

Page Number431-448

Published YearJanuary 2017

ISSN/ISBN No1758-2083

Indexed INScopus, Web of Science

CFD Analysis of Particle Laden Flow in a Cyclone Separator Using RANS and LES Methodology

Book Chapter

Book NameFluid Mechanics and Fluid Power Contemporary Research

PublisherSpringer

Author NameMakwana P., Lakdawala A.,

Page Number215-220

Chapter TitleCFD Analysis of Particle Laden Flow in a Cyclone Separator Using RANS and LES Methodology

Published YearJanuary 2017

ISSN/ISBN No978-81-322-2743-4

Indexed INScopus, Web of Science

Passive Flow Separation Control on a Cambered Airfoil Using Vortex Generator - A Numerical Approach

Conference

Title of PaperPassive Flow Separation Control on a Cambered Airfoil Using Vortex Generator - A Numerical Approach

Proceeding Name6th International Conference on Fluid Mechanics and Fluid Power

Author NameThakkar N., Lakhera V., Lakdawala A.,

OrganizationMNIT Allhabad

Year , VenueDecember 2016 , MNIT Allhabad

Numerical Analysis of Effect of Equivalence Ratio, Feed Stoke Composition and Particle Size on Performance of Down Draft Gasifier

Conference

Title of PaperNumerical Analysis of Effect of Equivalence Ratio, Feed Stoke Composition and Particle Size on Performance of Down Draft Gasifier

Proceeding Name6th International Conference on Fluid Mechanics and Fluid Power

Author NameBhatt K., Kanjariya J., Lakdawala A.,

OrganizationMNIT Allhabad

Year , VenueDecember 2016 , MNIT Allhabad

Box-Behnken based Response Surface Methodology for Optimization of Operational Parameters of Compression Ignition Engine Fuelled with Blend of Diesel, Biodiesel and Diethyl Ether (DEE)

Journal

Journal NameBio Fuels

Title of PaperBox-Behnken based Response Surface Methodology for Optimization of Operational Parameters of Compression Ignition Engine Fuelled with Blend of Diesel, Biodiesel and Diethyl Ether (DEE)

PublisherTaylor & Francis

Volume Number7 Issue 2

Page Number87-95

Published YearJanuary 2016

ISSN/ISBN No1759-7277

Indexed INScopus, Web of Science

A Dual Grid Level Set Method based Study on Similarity and Difference between Interface Dynamics for Surface Tension and Radial Electric Field Induced Jet Breakup

Journal

Journal NameChemical Engineering Science

Title of PaperA Dual Grid Level Set Method based Study on Similarity and Difference between Interface Dynamics for Surface Tension and Radial Electric Field Induced Jet Breakup

PublisherElsevier

Volume Number148

Page Number238-255

Published YearJanuary 2016

ISSN/ISBN No0009-2509

Indexed INScopus, Web of Science

Bio-Fuels for Compression Ignition Engine – A Review on Engine Performance, Emission and Life Cycle Analysis

Journal

Journal NameJournal of Renewable and Sustainable Energy Reviews

Title of PaperBio-Fuels for Compression Ignition Engine – A Review on Engine Performance, Emission and Life Cycle Analysis

PublisherElsevier

Volume Number65

Page Number24-43

Published YearJanuary 2016

ISSN/ISBN No1346-0321

Indexed INScopus, Web of Science

Selection procedure of fin type and fin configuration for plate fin heat exchanger

Conference

Title of PaperSelection procedure of fin type and fin configuration for plate fin heat exchanger

Proceeding NameNUiCONE 2015

PublisherCRC Press

Author NamePatel B., Patil D., Lakdawala A.,

OrganizationNirma University

Year , VenueDecember 2015 , Nirma University

Surface Roughness Analysis of Piston Assembly of CI Engine Fuelled with Diesel, Bio-diesel and Di ethyl Ether (DEE) During Long Term Endurance Test

Conference

Title of PaperSurface Roughness Analysis of Piston Assembly of CI Engine Fuelled with Diesel, Bio-diesel and Di ethyl Ether (DEE) During Long Term Endurance Test

Proceeding NameNUiCONE 2015

PublisherCRC Press

Author NamePatel P., Patel R. N., Chourasia S., Lakdawala A.

OrganizationNirma University

Year , VenueDecember 2015 , Nirma University

Numerical Analysis on Effect of Baffle Inclination Angle on Flow and Heat Transfer Characteristic of Shell and Tube Heat Exchanger with Helical Baffle

Conference

Title of PaperNumerical Analysis on Effect of Baffle Inclination Angle on Flow and Heat Transfer Characteristic of Shell and Tube Heat Exchanger with Helical Baffle

Proceeding NameNUiCONE 2015

PublisherCRC Press

Author NamePrajapati U., Lakdawala A.,

OrganizationNirma University

Year , VenueDecember 2015 , Nirma University

Numerical Simulation and Modelling of Downdraft Gasifier

Conference

Title of PaperNumerical Simulation and Modelling of Downdraft Gasifier

Proceeding NameNUiCONE 2015

PublisherCRC Press

Author NameKanjaria J., Patel R. N., Lakdawala A.,

OrganizationNirma University

Year , VenueDecember 2015 , Nirma University

Mathematical Modeling and Simulation of Gypsum Drum Dryer

Conference

Title of PaperMathematical Modeling and Simulation of Gypsum Drum Dryer

Proceeding NameNUiCONE 2015

PublisherCRC Press

Author NameNaik B., Lakdawala A.,

OrganizationNirma University

Year , VenueDecember 2015 , Nirma University

Identification of Energy Saving Potential of Different Thermal Insulation through Mathematical Modelling

Conference

Title of PaperIdentification of Energy Saving Potential of Different Thermal Insulation through Mathematical Modelling

Proceeding NameNUiCONE 2015

PublisherCRC Press

Author NameMattoo S., Shah B. A., Lakdawala A.,

Conference

Title of PaperNumerical Simulation of Flow over Rotational and Transversely Oscillating Cylinder

Proceeding Name5th International Conference on Fluid Mechanics and Fluid Power

Author NameGohil A. R., Shah B. A., Lakdawala A.,

OrganizationIIT Kanpur

Year , VenueDecember 2014 , IIT Kanpur

Design and Optimization of Shell and Tube Heat Exchangers Using Genetic Algorithm

Conference

Title of PaperDesign and Optimization of Shell and Tube Heat Exchangers Using Genetic Algorithm

Proceeding Name5th International Conference on Fluid Mechanics and Fluid Power

Author NameModi C., Lakdawala A.,

OrganizationIIT Kanpur

Year , VenueDecember 2014 , IIT Kanpur

Numerical Investigation on Mechanism of Satellite Formation in Electrified Jet Breakup Using Dual Grid Level-Set Method

Conference

Title of PaperNumerical Investigation on Mechanism of Satellite Formation in Electrified Jet Breakup Using Dual Grid Level-Set Method

Proceeding NameMechanical Engineering Graduate Research Symposium

Author NameLakdawala A., Thaokar R., Sharma A.,

OrganizationIIT Bombay

Year , VenueJanuary 2014 , IIT Bombay

A dual grid level set method based study of interface-dynamics for a liquid jet injected upwards into another liquid

Journal

Journal NameMultiphase Flow

Title of PaperA dual grid level set method based study of interface-dynamics for a liquid jet injected upwards into another liquid

PublisherElsevier

Volume Number2 Issue 59

Page Number206-220

Published YearJanuary 2014

ISSN/ISBN No0301-9322

Indexed INScopus, Web of Science

Numerical Study of Breakup of a Jet into Drops in Non-Newtonian Liquid – Liquid System

Conference

Title of PaperNumerical Study of Breakup of a Jet into Drops in Non-Newtonian Liquid – Liquid System

Proceeding NameNational Conference on Fluid Mechanics and Fluid Power

Author NameLakdawala A., Thaokar R., Sharma A.,

OrganizationNIT Hamirpur

Year , VenueDecember 2013 , NIT Hamirpur

Effect of Biodiesel Blends on Performance of Compression Ignition Engine

Conference

Title of PaperEffect of Biodiesel Blends on Performance of Compression Ignition Engine

Proceeding NameInternational Conference on Alternative Fuels and I C Engine ICAFICE (2013)

Author NameJoshi N. S., Lakdawala A. M., Shah N. K., Patel R. N.,

OrganizationMNIT Jaipur

Year , VenueJanuary 2013 , MNIT Jaipur

Numerical Investigation of Flow Induced Vibration for the Triangular Array of Circular Cylinder

Journal

Journal NameProcedia Engineering

Title of PaperNumerical Investigation of Flow Induced Vibration for the Triangular Array of Circular Cylinder

PublisherElsevier

Volume Number51

Page Number644 – 649

Published YearJanuary 2013

ISSN/ISBN No1877-7058

Indexed INScopus, Web of Science

Numerical Study on Transition of Jet-Breakup Mode from Dripping to Tip Streaming in a Co-flowing Liquid Jet

Conference

Title of PaperNumerical Study on Transition of Jet-Breakup Mode from Dripping to Tip Streaming in a Co-flowing Liquid Jet

Proceeding NameNational Conference on Fluid Mechanics and Fluid Power

Author NameLakdawala A., Gada V. H., Sharma A.,

OrganizationSVNIT Surat

Year , VenueDecember 2012 , SVNIT Surat

Numerical Determination of Delay Period of Four-Stroke Compression Ignition Engine by Zero Dimensional Modeling

Conference

Title of PaperNumerical Determination of Delay Period of Four-Stroke Compression Ignition Engine by Zero Dimensional Modeling

Proceeding NameNational Conference on Thermal Fluid and Manufacturing Science

Indexed INScopus, Web of Science

Experimental investigations on novel orientation study on axially grooved heat pipe with two evaporators and one condenser with multiple branches

Journal

Journal NameHeat and Mass Transfer

Title of PaperExperimental investigations on novel orientation study on axially grooved heat pipe with two evaporators and one condenser with multiple branches

PublisherSpringer Nature

Volume Number60

Page Number377-393

Published YearNovember 2023

ISSN/ISBN No0947-7411

Indexed INScopus, Web of Science

Parametric Study on Axially Grooved Heat Pipe With Two Heat Sources and One Heat Sink With Multiple Branches

Journal

Journal NameJournal of Thermal Science and Engineering Applications

Title of PaperParametric Study on Axially Grooved Heat Pipe With Two Heat Sources and One Heat Sink With Multiple Branches

PublisherAmerican Society of Mechanical Engineering (Transactions of ASME)

Volume Number15(06)

Page Number061004-16

Published YearJune 2023

ISSN/ISBN No1948-5085

Conference

Title of PaperHeat Transfer Analysis of 2-Stage G-M Cryocooler at 4 K Steady State Temperature for the Determination of its Capacity

Proceeding Name5th National Conference on Innovations in Mechanical Engineering

Author NameAnand Bhatt

OrganizationSinhgad Institute of Technology, Pune

Year , VenueApril 2017 , SIT, Lonavala

Page Number17-19

ISSN/ISBN No2229-5518

Experimental Investigation on Thermal Conductivity of Powder Insulation with Aluminium Opacifier and Under Evacuation by using LN2 Boil-off Calorimeter

Conference

Title of PaperExperimental Investigation on Thermal Conductivity of Powder Insulation with Aluminium Opacifier and Under Evacuation by using LN2 Boil-off Calorimeter

Proceeding Name2nd International Conference on Multidisciplinary Research & Practice

Author NameAnand Bhatt

Year , VenueDecember 2015 , AMA, Ahmedabad

Page Number286-289

ISSN/ISBN No2321-2705

Anand Patel

Study on Lean Six Sigma methodology from the Indian context: an investigation of literature

Journal

Journal NameInternational Journal of Lean Six Sigma

Title of PaperStudy on Lean Six Sigma methodology from the Indian context: an investigation of literature

PublisherEmerald Publishing

Volume Number15 (7)

Page Number1435-1493

Published YearOctober 2024

ISSN/ISBN No2040-4166

Indexed INScopus, Web of Science

A Conceptual Framework for Lean Six Sigma Deployment with a Focus on Indian SMEs

Conference

Title of PaperA Conceptual Framework for Lean Six Sigma Deployment with a Focus on Indian SMEs

Proceeding NameANQ Congress 2024 Yokohama

PublisherKeio University, Yokohama, Japan

Author NameAnand S. Patel, Dr. Kaushik M. Patel

OrganizationAsian Network for Quality and Keio University, Yokohama, Japan

Year , VenueSeptember 2024 , Keio University, Yokohama, Japan

Page Number1242-1248

Experimental investigations and sustainability analysis on the performance of vegetable oil-based MQL drilling of SS316L

Journal

Journal NameAdvances in Materials and Processing Technologies

Title of PaperExperimental investigations and sustainability analysis on the performance of vegetable oil-based MQL drilling of SS316L

PublisherTaylor & Francis

Published YearJuly 2024

ISSN/ISBN No2374-0698

Indexed INScopus, Web of Science

Effects of hot extrusion on compressive strength and densification of aluminium-based metal matrix composites

Journal

Journal NameAdvances in Materials and Processing Technologies

Title of PaperEffects of hot extrusion on compressive strength and densification of aluminium-based metal matrix composites

PublisherTaylor & Francis

Published YearApril 2024

ISSN/ISBN No2374-0698

Indexed INScopus, Web of Science

Investigations on The Influence Of Laser Surface Treatment on Hardness And Wear Behaviour of Al-MMC Prepared Through Powder Metallurgy Route

Journal

Journal NameFacta Universitatis, Series: Mechanical Engineering

Title of PaperInvestigations on The Influence Of Laser Surface Treatment on Hardness And Wear Behaviour of Al-MMC Prepared Through Powder Metallurgy Route

Published YearFebruary 2024

ISSN/ISBN No2335-0164

Indexed INScopus, Web of Science

Status of Lean Six Sigma implementation in Indian industries: a cross-sectional national survey

Journal

Journal NameInternational Journal of Lean Six Sigma

Title of PaperStatus of Lean Six Sigma implementation in Indian industries: a cross-sectional national survey

PublisherEmerald Publishing House

Volume Number14 (4)

Page Number791-814

Published YearJune 2023

ISSN/ISBN No2040-4166

Indexed INScopus, Web of Science

Ranking the Important Failure Factors of Lean Six Sigma deployment through Pareto Analysis

Conference

Title of PaperRanking the Important Failure Factors of Lean Six Sigma deployment through Pareto Analysis

Proceeding Name2nd Indian International Conference on Industrial Engineering and Operations Management

PublisherIEOM Society International, USA

Author NameAnand S. Patel, Dr. Kaushik M. Patel

OrganizationIEOM Society International, USA

Year , VenueAugust 2022 , National Institute of Technology (NIT), Warangal

Critical review of literature on Lean Six Sigma methodology

Journal

Journal NameInternational Journal of Lean Six Sigma

Title of PaperCritical review of literature on Lean Six Sigma methodology

PublisherEmerald Publishing House

Volume Number12 (3)

Page Number627-674

Published YearJuly 2021

ISSN/ISBN No2040-4166

Indexed INScopus, Web of Science

Abstract

Purpose: This paper aims to develop an initial understanding of the Lean Six Sigma methodology since its inception and examine the few Lean Six Sigma dimensions as a research domain through a critical review of the literature. Design/methodology/approach: The paper is structured in two-part. The first part of the paper attempts to dwell on the evolution of the Lean Philosophy and Six Sigma methodology individually and the emergence of Lean Six Sigma methodology, covered under the Lean Six Sigma: a historical outline section. The second part of the study examines the dimensions associated with Lean Six Sigma such as frameworks, critical success factors, critical failure factors, type of industry, performance metric, year, publisher and journal, based on a total of 223 articles published in 72 reputed journals from the year 2000 to 2019 as a literature review. Findings: The adoption of Lean Six Sigma, as a continuous improvement methodology, has grown enormously in the manufacturing and few service sectors such as health care and higher education during the past decade. The study revealed that researchers came out with conceptual frameworks for the implementation of Lean Six Sigma, whereas the validation through case studies seems to be lacking. The integration of Lean Six Sigma and other approaches with a focus on sustainability and the environment has emerged as a research field. A few of the most common critical success and failure factors were identified from the articles studied during the study. Research limitations/implications: This paper may not have included some of the studies due to the inaccessibility and selection criteria followed for the study. Originality/value This paper will provide an initial introduction on Lean, Six Sigma and Lean Six Sigma and research insights Lean Six Sigma to beginners such as students, researchers and entry-level professionals.

Prioritization of Lean Six Sigma Success Factors using Pareto Analysis

Journal

Journal NameIOP Conference Series: Materials Science and Engineering

Title of PaperPrioritization of Lean Six Sigma Success Factors using Pareto Analysis

Publisher IOP Publishing

Volume Number1070

Page Number1-8

Published YearFebruary 2021

ISSN/ISBN No1757-899X

Indexed INOthers

Investigative Study of Cutting Parameters during Turning Hardened Steel with Carbide Inserts

Journal

Journal NameInternational Journal of Mechatronics and Manufacturing Systems

Title of PaperInvestigative Study of Cutting Parameters during Turning Hardened Steel with Carbide Inserts

PublisherInderscience Publisher

Volume Number14 (1)

Page Number39-54

Published YearFebruary 2021

ISSN/ISBN No1753-1047

Indexed INScopus

Applicability of CaF2 solid lubricant assisted minimum quantity lubrication in turning for sustainable manufacturing

Book Chapter

Book NameAdvances in Forming, Machining and Automation. Lecture Notes on Multidisciplinary Industrial Engineering

PublisherSpringer, Singapore

Author NameM. A. Makhesana, K. M. Patel, Anand S. Patel

Page Number229-238

Chapter TitleApplicability of CaF2 solid lubricant assisted minimum quantity lubrication in turning for sustainable manufacturing

Published YearNovember 2019

ISSN/ISBN No978-981-32-9417-2

Indexed INScopus

Investigative Study of temperature produced during Turning Operation using MQL and solid lubricants

Book Chapter

Book NameAdvances in Forming, Machining and Automation. Lecture Notes on Multidisciplinary Industrial Engineering

PublisherSpringer, Singapore

Author NameAnand S. Patel, M. A. Makhesana, K. M. Patel

Page Number539-549

Chapter TitleInvestigative Study of temperature produced during Turning Operation using MQL and solid lubricants

Published YearNovember 2019

ISSN/ISBN No978-981-32-9416-5

Indexed INScopus

Investigative study of temperature produced during Turning operation using MQL and Solid Lubricants

Conference

Title of PaperInvestigative study of temperature produced during Turning operation using MQL and Solid Lubricants

Proceeding NameProceedings of 7th International & 28th All India Manufacturing Technology, Design and Research Conferenc

OrganizationCollege of Engineering, Guindy, Anna University, Chennai

Year , VenueDecember 2018 , College of Engineering, Guindy, Anna University, Chennai

Applicability of CaF2 Solid Lubricant Assisted Minimum Quantity Lubrication in Turning for Sustainable Manufacturing

Conference

Title of PaperApplicability of CaF2 Solid Lubricant Assisted Minimum Quantity Lubrication in Turning for Sustainable Manufacturing

Proceeding NameProceedings of 7th International & 28th All India Manufacturing Technology, Design and Research Conferenc

OrganizationCollege of Engineering, Guindy, Anna University, Chennai

Year , VenueDecember 2018 , College of Engineering, Guindy, Anna University, Chennai

Improvement in Inter-departmental services using Kaizen Philosophy at Educational Institute: A Case Study

Book Chapter

Book NameVUCA Challenges: Sustainability through Quality

PublisherAmerican Society for Quality India Pvt. Ltd.

Author NameRajesh K. Jain & Himanshu M. Trivedi

Page Number299-307

Chapter TitleImprovement in Inter-departmental services using Kaizen Philosophy at Educational Institute: A Case Study

Published YearNovember 2018

ISSN/ISBN No978-81-930216-4-4

Effect of Cutting Parameters on Power Consumption and Tool Wear during Turning of EN31 Steel under Minimum Quantity Solid Lubrication

Journal

Journal NameNirma University Journal of Engineering and Technology

Title of PaperEffect of Cutting Parameters on Power Consumption and Tool Wear during Turning of EN31 Steel under Minimum Quantity Solid Lubrication

PublisherNirma University, Ahmedabad

Volume Number6 (1)

Page Number6-11

Published YearSeptember 2018

ISSN/ISBN No2231-2870

Indexed INIndian citation Index

Performance Assessment of Use of Solid Lubricants as Cooling Method in Machining Process

Conference

Title of PaperPerformance Assessment of Use of Solid Lubricants as Cooling Method in Machining Process

Proceeding NameProceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference

PublisherAll India Manufacturing Technology, Design and Research Conference, AIMTDR 2016, Pune

OrganizationCollege of Engineering, Pune

Year , VenueDecember 2016 , College of Engineering, Pune

Page Number338-340

ISSN/ISBN No978-93-86256-27-0

A Case Study of Implementing Quality Improvements in Inter – Departmental Activities at an Educational Institute

Conference

Title of PaperA Case Study of Implementing Quality Improvements in Inter – Departmental Activities at an Educational Institute

Proceeding NameProceedings of International Conference of Quality 2014, Tokyo

OrganizationUnion of Japanese Scientists and Engineers (JUSE), Japan in cooperation with American Society for Quality (ASQ), European Organization for Quality (EOQ) and International Academy for Quality (IAQ)

Published YearOctober 2014

Role of IQAC in Achieving Quality in Engineering Education: A Polytechnic Case Study

Conference

Title of PaperRole of IQAC in Achieving Quality in Engineering Education: A Polytechnic Case Study

Proceeding NameProceedings of International Conference on ‘Innovations and Sustainable Development

PublisherBonfring, Coimbatore

Author NameAnand S. Patel, Mamta Saiyad and V. R. Iyer

OrganizationO P Jindal Institute of Technology, Raigarh

Year , VenueNovember 2012 , O P Jindal Institute of Technology, Raigarh

Page Number108-110

ISSN/ISBN No978-93-82338-21-5

Impact of Technological Innovation on Teaching – Learning Process in Technical Education: A Case Study

Journal

Journal NameThe Journal of Engineering Education (Now known as Journal of Engineering Education Transformations)

Title of PaperImpact of Technological Innovation on Teaching – Learning Process in Technical Education: A Case Study

PublisherRajarambapu Institute of Technology

Volume Number21 (2)

Page Number29-33

Published YearOctober 2007

ISSN/ISBN No2349-2473

Indexed INIndian citation Index

Need Base Tie – Up with Foreign Education Institute: A Case Study’

Book Chapter

Book NameGlobalisation And Manpower Planning

PublisherDiscovery Publishing House

Author NameAnand S. Patel

Page Number144-150

Chapter TitleNeed Base Tie – Up with Foreign Education Institute: A Case Study’

Published YearJanuary 2005

ISSN/ISBN No9788183560368

Arvind Sankhla

Investigations on the influence of laser surface treatment on hardness and wear behaviour of al-mmc prepared through powder metallurgy route

Journal

Journal NameFacta Universitatis, Series: Mechanical Engineering

Title of PaperInvestigations on the influence of laser surface treatment on hardness and wear behaviour of al-mmc prepared through powder metallurgy route

Volume Number1

Page Number1-18

Published YearFebruary 2024

ISSN/ISBN No03542025

Abstract

Aluminium metal matrix composites (Al-MMCs) are extensively used in various industrial sectors, including aerospace, automotive, construction, and electronics, owing to higher hardness, low density, higher fatigue and specific strength. Powder metallurgy is an effective method for manufacturing composite materials. Compared to pure metals and alloys, the mechanical characteristics of the SiC-reinforced MMCs are enhanced. The Al-MMC surface can undergo metallurgical changes due to the laser treatment, which can also strengthen the binding between the matrix material and the reinforcement particles. Therefore, the current work investigates the impact of SiC particle addition and laser surface treatment on the hardness and wear characteristics of aluminium metal matrix composite (Al-MMC). The Al-MMC is initially fabricated using a powder metallurgy process, and then the MMC is treated with a laser. Compared to the untreated MMC, the laser surface treatment increased the hardness by almost 12%. Additionally, the addition of SiC content by 10%, 15%, 20%, and 25% in laser-treated Al-MMC resulted in increased hardness by 12%, 14%, 15%, and 16%, respectively, compared to untreated Al-MMC. Furthermore, the wear resistance improved as the reinforcement particles increased. The laser-treated samples exhibited lower wear than untreated ones due to the formation of a new layer on the treated surface, preventing the release of SiC particles. The surface treatment of MMC through the laser is a novel approach to fabricating wear-resistant Al-MMCs.

Mechanical and Microstructural Evolution of Friction stir welded joint of AA2014 alloys

Journal

Journal NameIndian Journal of Engineering adn Material Science

Title of PaperMechanical and Microstructural Evolution of Friction stir welded joint of AA2014 alloys

Publisher NIScPR-CSIR,India

Volume Number29

Page Number598-604

Published YearOctober 2022

ISSN/ISBN No0971-4588

Indexed INScopus

Abstract

The solidification cracking phenomenon restricts the use of fusion welding process to join aluminum and its alloy. Friction stir welding (FSW) process can be used in joining of aluminium alloys which is not or less susceptible to form welded voids, induced distortions, solidification cracking. In the present work an investigation of mechanical and microstructural changes after FSW is presented during the similar joining of AA2014 aluminium alloys. The influences of tool geometry during FSW is analysed and compared among the joint made by triangular, pedal and pentagonal pin. Based on the obtained mechanical properties of the joint metallurgical investigation is performed. Optical micrographs are used to reveal the phases present in the fusion zone. EBSD investigation of the selected sample is done to analyse the mis-orientaion angle and grain size etc. Pedal pin profile tool exhibit better mechanical properties in comparison to pentagonal pin and triangular pin. Obtained ultimate tensile strength and percentage elongation are 345MPa and 13.5 % respectively. Microhardness and impact energy are obtained as 125HV0.2 and 4.6 J of Fpedalsample. Obtained joint efficiency of Fpedal sample is 74%, which is higher among joint efficiency of Fpentagonal and Ftringular samples.

[HTML] from sciencedirect.com Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder metallurgy route

Journal

Journal Namejournal of materials research and technology

Title of Paper[HTML] from sciencedirect.com Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder metallurgy route

Volume Number18

Page Number282-292

Published YearMay 2022

Indexed INScopus

Abstract

roperties of metal matrix composites (MMCs) are affected by various process variables such as particle size of powders, the proportion of reinforcement material, mixing methods, sintering temperature, and duration. The significant drawback of stir casting is reinforcement segregation, which is too difficult to avoid. Hence, the powder metallurgy route is utilized to prepare Al-MMC. In the current work, aluminium-based MMC is fabricated with varying proportions of silicon carbide (SiC) as a reinforcement material. Mixing of powders is done using V-Blender and barrel mixer with three different mixing techniques and the mixing quality of prepared powders is assessed. A significant reduction of mixing time, i.e., more than 50%, is achieved through a novel barrel mixer as compared to a conventional V-blender. Two important properties, hardness and compressive strength of fabricated Al-MMC, are experimentally

Experimental Investigation of Tool Wear in Machining of SiC Based Al-MMC

Journal

Journal NameAdvances in Materials and Processing Technologies

Title of PaperExperimental Investigation of Tool Wear in Machining of SiC Based Al-MMC

PublisherTaylor and Francis

Published YearJuly 2021

Indexed INScopus

Metal Matrix Composites Fabricated by Stir Casting Process–A Review

Journal

Journal NameAdvances in Materials and Processing Technologies

Title of PaperMetal Matrix Composites Fabricated by Stir Casting Process–A Review

PublisherTaylor and Francis

Published YearNovember 2020

Synthesis of Aluminium Based Metal Matrix Composites (MMC) and Experimental Study of their properties

Conference

Title of PaperSynthesis of Aluminium Based Metal Matrix Composites (MMC) and Experimental Study of their properties

Proceeding NameTechnology Drivers: Engine for Growth: Proceedings of the 6th Nirma University International Conference on Engineering (NUiCONE 2017), November 23-25, 2017, Ahmedabad, India

PublisherCRC press /Taylor & Francis

Author NameProf. Arvind Sankla Dr. B.A.Modi Dr. K.M.Patel

OrganizationNirma University

Year , VenueNovember 2017 , Nirma University

Page Number271-276

ISSN/ISBN No978-1-138-56042-0

Indexed INOthers

Synthesis of Aluminium Based Metal Matrix Composites (MMC) and Experimental Study of their properties

Book Chapter

Book NameNUICONE

PublisherCRC press /Taylor & Francis

Author NameArvind Sankhla

Chapter TitleSynthesis of Aluminium Based Metal Matrix Composites (MMC) and Experimental Study of their properties

Published YearJanuary 2017

Ashish Gohil

Experimental determination of fracture forming line for AA1100 aluminum sheet in single point incremental forming process.

Conference

Title of PaperExperimental determination of fracture forming line for AA1100 aluminum sheet in single point incremental forming process.

Proceeding NameMaterials Today: Proceedings

PublisherElsevier

Author NameAshish Gohil

OrganizationICATCHCOME 2023

Year , VenueFebruary 2023 , KPR Instituteof Engineering and Technology, Coimbatore

Page Number8

Indexed INScopus

Abstract

The failure prediction in the sheet metal forming process is carried out using the forming limit curve which is always specific to the material under consideration. The single point incremental forming is a novel process in which failure is predicted by the fracture forming line as the deformation involved in the process is in the local area due to gradual movement of the hemispherical ended tool. In this work, the forming limit curve is determined experimentally by forming the different geometries which experiences different strain conditions ranging from the plane strain to bi-axial mode of deformation. The experimental fracture forming line is validated by comparing it with the analytical models available in the literature.

Conference

Title of PaperParametric Optimization of Hydraulic Modular Trailer Frame Using ANSYS (APDL)

Proceeding NameNirma university International Conference2011

OrganizationNirma University

Year , VenueDecember 2011 , Nirma University

Page NumberME 41 1-6

Balkrushna Shah

Evaluation of Pressure, Surface Characteristics, and Fluid Properties Effect on Pool Boiling Heat Transfer Over Plain and External Micro-Finned Cylindrical Surfaces

Journal

Journal NameJournal of Thermal Science and Engineering Applications

Title of PaperEvaluation of Pressure, Surface Characteristics, and Fluid Properties Effect on Pool Boiling Heat Transfer Over Plain and External Micro-Finned Cylindrical Surfaces

PublisherAmerican Society of Mechanical Engineers (ASME)

Volume Number15

Published YearNovember 2023

ISSN/ISBN No19485085

Indexed INScopus, Web of Science, Indian citation Index

EXPERIMENTAL STUDY ON NUCLEATE POOL-BOILING HEAT TRANSFER OF R141B OVER PLAIN AND MICRO-FINNED CYLINDRICAL SURFACES AT DIFFERENT PRESSURES

Journal

Journal NameMultiphase Science and Technology

Title of PaperEXPERIMENTAL STUDY ON NUCLEATE POOL-BOILING HEAT TRANSFER OF R141B OVER PLAIN AND MICRO-FINNED CYLINDRICAL SURFACES AT DIFFERENT PRESSURES

PublisherBegell House

Volume Number34

Page Number67–94

Published YearFebruary 2022

ISSN/ISBN No1943-6181

Indexed INScopus

Abstract

Micro-finned cylindrical surfaces find wide applications as enhanced surfaces for heat transfer in heat exchangers used in refrigeration and chemical process industries. In the present study, the experimental investigation of pool-boiling heat transfer of refrigerant R141b has been carried out at different pressures (between 100 and 175 kPa) and heat flux that ranges from 20 to 100 kW/m2 over a plain and micro-finned cylindrical surface. It was observed that with the micro-finned cylindrical surface, boiling performance was improved for all tested pressures. The average increase in the boiling heat-transfer coefficient is 7–35% in comparison to the plain surface at respective pressure between 100 and 175 kPa. With the rise in pressure, the boiling heat-transfer coefficient for the micro-finned cylindrical surface increases at a higher rate as compared to the plain surface. This is due to the combined effect of the enhanced surface and decrease in surface tension of the liquid with pressure. The bubble departure diameter decreases with an increase in pressure, as with increased pressure the surface tension decreases, thereby causing an early detachment of the bubble from the surface. The experimental values of bubble departure diameter were compared with the well-known correlations and were found to be within § 20%.

Proceeding NameNational Conference on Innovative and Emerging Technologies

PublisherS R Patel Engineering College, Mehsana

Author NameBalkrushna Shah

OrganizationS R Patel Engineering College, Mehsana

Year , VenueJanuary 2014 , Mech. Engg. Dept., S R Patel Engineering College, Mehsana

Indexed INOthers

Numerical Investigation of Flow Induced Vibration for the Triangular Array of Circular Cylinder

Conference

Title of PaperNumerical Investigation of Flow Induced Vibration for the Triangular Array of Circular Cylinder

Proceeding NameNUiCONE 2012

PublisherProcedia Engineering Elsevier

Author NameHardik R. Gohel, Balkrushna A. Shah, Absar M. Lakdawala

OrganizationInstitute of Technology, Nirma University

Year , VenueDecember 2012 , Institute of Technology, Nirma University

Page Number644-649

Indexed INScopus

Bharatkumar Modi

Experimental study on single point incremental hole flanging of aluminium 5052 material

Journal

Journal NameMaterials And Manufacturing Processes

Title of PaperExperimental study on single point incremental hole flanging of aluminium 5052 material

PublisherTaylor & Franscis

Volume Number3

Page Number680-691

Published YearNovember 2023

Indexed INScopus

Abstract

The single-point incremental forming process is useful for manufacturing prototypes and customised sheet metal parts. The application of single-point incremental forming to perform hole-flanging operations has been explored by many researchers. The flange can be formed by a single-stage or a multi-stage strategy of single-point incremental forming. A comparative study of both strategies is essential to understand their applicability. In this work, the formability of AA5052-H32 sheet metal has been analysed by finding the Limit Forming Ratio and thickness of the flanges formed with the single-stage and multi-stage strategies. The single-stage strategy reduced the operation time by 105%, whereas the multi-stage strategy increased the formability by 11%. Further, an experimental study has been carried out to understand the effect of process parameters on the flange quality in single-stage single-point incremental …

In-process grain refinement on AA5052-H32 sheet metal in single-stage single point square hole flanging

Journal

Journal NameManufacturing Letters

Title of PaperIn-process grain refinement on AA5052-H32 sheet metal in single-stage single point square hole flanging

PublisherElsevier

Volume Number35

Page Number232-238

Published YearAugust 2023

Indexed INOthers

Abstract

Hole flanging in sheet metal work can be performed by single point incremental forming. It has been explored by researchers for a decade. Further efforts should be made to decrease the operation time and to improve the mechanical properties of the end product obtained by the forming method. In this direction, a new approach to achieve in-process grain refinement on the aluminium 5052-H32 sheet during single point incremental hole flanging has been presented in this work. Square flanges are formed by a low frequency vibration-assisted method using a novel tool with the single-stage approach. Results show that grain refinement was achieved on the square flanges by the proposed tool and the hardness increased. Moreover, a study on the thickness of the flange, the height of the flange, and surface quality has been presented.

Experimental determination of fracture forming line for AA1100 aluminum sheet in single point incremental forming process

Journal

Journal NameMaterials Today: Proceedings

Title of PaperExperimental determination of fracture forming line for AA1100 aluminum sheet in single point incremental forming process

PublisherElsevier

Published YearJune 2023

Indexed INOthers

Abstract

Effect of amplitude of vibration in ultrasonic vibration-assisted single point incremental forming

Journal

Journal NameMaterials and Manufacturing Processes

Title of PaperEffect of amplitude of vibration in ultrasonic vibration-assisted single point incremental forming

PublisherTaylor & Franscis

Volume Number37(16)

Page Number1837-1849

Published YearDecember 2022

Indexed INScopus

Abstract

In the recent past, ultrasonic vibration-assisted single-point incremental forming has gained the attention of the metal forming researchers’ interest. Being a latest development, the process is not completely established from the point of view of the underlying mechanism and the effect of the process variables on the formability of the component. The amplitude of vibration and frequency of vibration are two ultrasonic process-specific variables which may affect the formability of the component. In this research work, the effect of amplitude of vibration along with forming feed and step-depth have been studied by performing a groove test on AA3003 aluminum sheet. The FFL for the SPIF process is proposed based on the thickness strain of the tensile testing component. The critical value of amplitude of ultrasonic vibration and ultrasonic intensity is identified demarking the ultrasonic softening and ultrasonic hardening zone.

Single-Stage Single Point Incremental Square Hole Flanging Of AA5052 Material

Journal

Journal NameMaterials And Manufacturing Processes

Title of PaperSingle-Stage Single Point Incremental Square Hole Flanging Of AA5052 Material

PublisherTaylor & Franscis

Volume Number38(6)

Page Number680-691

Published YearOctober 2022

Indexed INScopus

Abstract

Single-point incremental forming process is a cost-effective die-less process to form sheet metal parts. To implement the forming method in industrial applications, it is required to study forming of various shapes. The available literature on hole flanging by single-point incremental forming is mostly focused on cylindrical flanges and very few studies on the square flange are available. The available study on the square flange is based on multistage experiments. The single-stage forming can reduce the forming time significantly. Therefore, in this work, the single-stage single-point square hole flanging of AA5052-H32 sheet material has been studied. A process-specific fracture forming limit line is obtained by single point incremental hole flanging experiments to analyze the strain behavior during the forming of flanges. A definition of Limit Forming Ratio for square flanging has been proposed and its value for the flange …

Effect of copper nano particles on mechanical, thermal and morphological properties of short jute fiber reinforced poly lactic acid composites

Journal

Journal NameAIP Conference Proceedings

Title of PaperEffect of copper nano particles on mechanical, thermal and morphological properties of short jute fiber reinforced poly lactic acid composites

PublisherAIP Publishing House

Volume Number2393(1)

Published YearMay 2022

Indexed INOthers

Abstract

Composites is a type of material which is made offibers or fillers embedded in matrix. Fibers and fillers are used as reinforcing materials to get the desirable properties to the composite laminates. The matrix is used for binding the reinforcing materials in place and to distribute the stresses due to external force uniformly among the constituent reinforcement materials. In this paper, we are studying an effect of copper Nano particles on mechanical, thermal and morphological properties of short jute fiber reinforced poly lactic acid composites. The composition with 80 grams PLA and 20 grams fiber has the highest tensile strength of 56 N/mm2 as well as has the highest yield strength of 45 N/mm2. It is evident that addition of copper Nano powder decreases both tensile and yield strength. The composition with 77 grams PLA, 20 grams fiber and 3 grams copper Nano powder has the highest Izod impact strength of 16 joules

Multistage tool path strategy to produce hemispherical shape using single point incremental forming process

Journal

Journal

Journal NameInternational Journal of Mechatronics and Manufacturing Systems

Title of PaperUltrasonic vibration-assisted single point incremental forming of hemispherical shape using multi-stage forming strategy

PublisherInderscience Publishers (IEL)

Volume Number13(3)

Page Number247-265

Published YearNovember 2020

Indexed INOthers

Abstract

Ultrasonic vibrations have found widespread engineering applications. The use of ultrasonic vibrations in machining and welding processes have reached the commercially viable stage. However, the application of ultrasonic vibrations in sheet metal forming applications is still in the research phase. This paper addresses the application of ultrasonic vibrations in a single point incremental forming process. The main focus of the paper is on the development of the ultrasonic vibration-assisted forming set-up customised to the vertical machining centre (VMC). Experiments have also been conducted with the developed set-up to produce the hemispherical shape which is difficult to form using a single-stage strategy using the single point incremental forming process. A multi-stage forming strategy has been used to form the hemispherical shape and the analysis of the results has been presented.

Review of the effect of process parameters on performance measures in the incremental sheet forming process

Journal

Journal NameProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture235

Title of PaperReview of the effect of process parameters on performance measures in the incremental sheet forming process

PublisherSAGE Publications

Volume Number235(3)

Page Number303-332

Published YearOctober 2020

Indexed INOthers

Abstract

Incremental sheet forming process has developed the interest of researchers in the field of sheet metal forming due to high formability and capability to produce prototypes of new products at low cost and minimum lead time. Research work is going on in various front to enhance the process capabilities so that it can be explored for commercial production. In this article, progress and recent development in the field of incremental forming has been reviewed and presented for the benefit of practicing engineers and industry. The effect of various process parameters on the performance of the process have been summarized in this paper. Moreover, the issues which need attention are discussed towards the conclusion of this paper.

FE simulation of metal spinning process using LS-DYNA software

Book Chapter

Book NameTechnologies for Sustainable Development

PublisherCRC Press

Author NameBharatkumar A Modi

Page Number312-316

Chapter TitleFE simulation of metal spinning process using LS-DYNA software

Published YearSeptember 2020

Abstract

Metal spinning is one of the ancient metal forming processes. Today, it has gained popularity due to its immense advantages over other metal forming processes. There are several complexities associated with the spin forming process. Different metal requires different forces and different procedures to generate the desired shape of the product. The uniformity in the thickness is also an important aspect to consider in manufacturing with the spinning process. The present work aims to perform the FE simulation of the metal spinning process using explicit dynamics solver LS-DYNA. To study the metal spin forming process resultant force and stress obtained through FE simulation are used as response variables.

Effect of feed and step depth in hole flanging using single point incremental forming

Journal

Journal NameJournal of Physics: Conference Series

Title of PaperEffect of feed and step depth in hole flanging using single point incremental forming

PublisherIOP Publishing

Volume Number1706(1)

Page Number012177

Published YearAugust 2020

Indexed INOthers

Abstract

Single Point Incremental Forming can be used to form hole flanges in automobile and aerospace applications. In hole flanging using single point incremental forming, a study on effect of feed and step depth on formability has been carried out. Hole flange thickness is taken as formability criterion. Moreover, effect of those parameters on surface roughness has also been studied to understand effect of Single Point Incremental Forming. The results obtained by experimental work were analyzed and are presented here.

Optimization of molding process parameter for jute reinforced poly lactic acid composite

Journal

Journal NameJournal of Advanced Research in Fluid Mechanics and Thermal Sciences

Title of PaperOptimization of molding process parameter for jute reinforced poly lactic acid composite

PublisherPenerbit Akademia Baru

Volume Number71(1)

Page Number117-124

Journal

Journal NameApplied Mechanics and Materials

Title of PaperExperimental Investigation of Single Point Incremental Forming of Aluminum Sheet in Groove Test

PublisherTrans Tech Publications, Switzerland

Volume Number867

Page Number177-183

Published YearJuly 2017

ISSN/ISBN NoISSN: 1662-7482

Indexed INOthers

Effect of Friction and Lubrication on Formability of AA5182 Alloy in Hydroforming of Square Cups

Journal

Journal NameMaterials Science Forum

Title of PaperEffect of Friction and Lubrication on Formability of AA5182 Alloy in Hydroforming of Square Cups

PublisherTrans Tech Publications, Switzerland

Volume Number762

Page Number621-626

Published YearDecember 2013

Indexed INOthers

Development of a hydroforming set up for deep drawing of square cups with variable blank holding force technique

Journal

Journal NameInternational Journal of Advanced Manufacturing Technology

Title of PaperDevelopment of a hydroforming set up for deep drawing of square cups with variable blank holding force technique

PublisherSpringer

Volume Number 66

Page Number1159-1169

Published YearJanuary 2013

Indexed INScopus

Bimal Kumar Mawandiya

Title of PaperExperimental investigations and effect of parameters on friction welded AISI 304 and Invar alloys

PublisherTaylor & Francis

Page Number1-12

Published YearJuly 2023

Indexed INScopus, Web of Science

Development and performance analysis of out-of-autoclave curing process for CFRP composites

Journal

Journal NameAdvances in Materials and Processing Technologies

Title of PaperDevelopment and performance analysis of out-of-autoclave curing process for CFRP composites

PublisherTaylor & Francis

Volume Number8 (sup3)

Page Number1593-1603

Published YearOctober 2022

ISSN/ISBN No2374068X

Indexed INScopus, Web of Science

Investigations on the influence of printing parameters during processing of biocompatible polymer in Fused Deposition Modelling (FDM)

Journal

Journal NameAdvances in Materials and Processing Technologies

Title of PaperInvestigations on the influence of printing parameters during processing of biocompatible polymer in Fused Deposition Modelling (FDM)

PublisherTaylor & Francis

Volume Number8 (sup2)

Page Number320-336

Published YearSeptember 2022

ISSN/ISBN No2374068X

Indexed INScopus, Web of Science

Improving Inventory Visibility by Spreadsheet Modelling: A Case Study

Conference

Title of PaperImproving Inventory Visibility by Spreadsheet Modelling: A Case Study

Proceeding NameProceedings of the 2 nd Indian International Conference on Industrial Engineering and Operations Management Warangal, Telangana, India, August 16-18, 2022

Author NameAditya Choksi, Bimal Kumar Mawandiya and Mayurkumar Makhesana

OrganizationIEOM Society International

Year , VenueAugust 2022 , National Institute of Management, Warangal, Telangana, India

Page Number1227-1232

Price and Production Forecasting Model of Okra – A Case Study

Conference

Title of PaperPrice and Production Forecasting Model of Okra – A Case Study

Proceeding NameProceedings of the 2 nd Indian International Conference on Industrial Engineering and Operations Management Warangal, Telangana, India, August 16-18, 2022

Author NameAtharva Ratnaparkhe, Somya Kothari and Siddharth Bhatia, Bimal Kumar Mawandiya and Bharatkumar Modi

OrganizationIEOM Society International

Year , VenueAugust 2022 , National Institute of Management, Warangal, Telangana, India

Page Number1090-1099

A New Comprehensive Methodology for Evaluation of Course Outcomes and Programme Outcomes

Journal

Journal NameJournal of Engineering Education Transformations

Title of PaperA New Comprehensive Methodology for Evaluation of Course Outcomes and Programme Outcomes

Volume Number36 (1)

Page Number95-103

Published YearJuly 2022

ISSN/ISBN No23492473

Indexed INScopus

Multi-echelon closed-loop supply chain production-inventory model with finite manufacturing and remanufacturing rates

Journal

Journal NameJournal of Remanufacturing

Title of PaperMulti-echelon closed-loop supply chain production-inventory model with finite manufacturing and remanufacturing rates

PublisherSpringer

Volume Number12

Page Number303–337

Published YearJuly 2022

ISSN/ISBN No2210-4690

Indexed INScopus

Guidelines for Designing Critical Parameters of Split Mechanical Seal

Conference

Title of PaperGuidelines for Designing Critical Parameters of Split Mechanical Seal

Proceeding Name13th International Conference on Advances in Computing, Control, and Telecommunication Technologies, ACT 2022

Author NamePatel Abhishek, Patel Dhaval, Bhojawala Vipul, Mawandiya Bimal Kumar

Year , VenueJune 2022 , Virtual, Online

Page Number252 - 256

ISSN/ISBN No978-171385793-8

Indexed INScopus

Journal

Journal NameJournal of the Brazilian Society of Mechanical Sciences and Engineering

Title of PaperMachinability improvement and sustainability assessment during machining of AISI 4140 using vegetable oil-based MQL

PublisherSpringer Nature

Volume Number43(12)

Page Number535

Published YearDecember 2021

Indexed INScopus, Web of Science

Process Improvement through the implementation of 5S in the Cement Bag Manufacturing Industry

Conference

Title of PaperProcess Improvement through the implementation of 5S in the Cement Bag Manufacturing Industry

Proceeding Name7th International Conference on Sustainability and Management Strategy

PublisherInstitute of Management and Technology Nagpur

Author NameDesai, J. N. Makhesana, M., Mawandiya, B. K. and Patel K. M

OrganizationInstitute of Management and Technology Nagpur

Year , VenueOctober 2021 , Institute of Management and Technology, Nagpur

A Study on the Influence of Industry 4.0 Technology on the Success of New-Age Company Based on Resource Based View TheoryGlobal Conference on Innovations in Management and Business

Conference

Title of PaperA Study on the Influence of Industry 4.0 Technology on the Success of New-Age Company Based on Resource Based View TheoryGlobal Conference on Innovations in Management and Business

Proceeding NameGlobal Conference on Innovations in Management and Business

PublisherNIT Warangal

Author NameMohideen R. F., Gopla, PRC and Mawandiya, B. K.

OrganizationNIT Warangal

Year , VenueJuly 2021 , NIT Warangal

Study on Driving Factors for Industry 4.0 of Retail Sector Supply Chain

Conference

Title of PaperStudy on Driving Factors for Industry 4.0 of Retail Sector Supply Chain

Proceeding NameGlobal Conference on Innovations in Management and Business

PublisherNIT Warangal

Author NameKaleel, J., Gopla, PRC and Mawandiya

OrganizationNIT Warangal

Year , VenueJuly 2021 , NIT Warangal

Performance assessment of vegetable oil-based minimum quantity lubrication (MQL) in drilling

Journal

Journal NameMaterials Today: Proceedings

Title of PaperPerformance assessment of vegetable oil-based minimum quantity lubrication (MQL) in drilling

Volume Number44

Page Number341 - 345

Published YearDecember 2020

ISSN/ISBN No2214-7853

Indexed INScopus

Numerical study of resin flow in VARTM composite manufacturing process

Book Chapter

Book NameTechnologies for Sustainable Development

PublisherCRC Press

Author NamePratik Patel, Tushar Gajjar, Dhaval Shah, Shashikant Joshi, Bimal Kumar Mawandiya

Page Number344-349

Chapter TitleNumerical study of resin flow in VARTM composite manufacturing process

Published YearSeptember 2020

Indexed INScopus

Process capability analysis of worm gearbox manufacturing

Book Chapter

Book NameTechnologies for Sustainable Development

PublisherCRC Press

Author NameUmang Prajapati, Bimal Kumar Mawandiya, Kaushik Patel, Dhaval Shah

Page Number334-338

Chapter TitleProcess capability analysis of worm gearbox manufacturing

Published YearSeptember 2020

Indexed INScopus

Design and development of quality system for gear case casting

Book Chapter

Book NameTechnologies for Sustainable Development

PublisherCRC Press

Author NameV Suthar, BK Mawandiya, K Patel, D Shah

Page Number339-343

Chapter TitleDesign and development of quality system for gear case casting

Published YearSeptember 2020

Indexed INScopus

Design of automatic vertical storage system

Book Chapter

Book NameTechnologies for Sustainable Development

PublisherCRC Press

Author NameNishant Vyas, BK Mawandiya, Mayur A Makhesana

Page Number293-298

Chapter TitleDesign of automatic vertical storage system

Published YearSeptember 2020

Indexed INScopus

Design of trolley attaching mechanism for unit load automated guided vehicle system

Book Chapter

Book NameTechnologies for Sustainable Development

PublisherCRC Press

Author NameJatin Panchal, Bimal Kumar Mawandiya, Dhaval Shah, Shashikant Joshi

Page Number329-333

Chapter TitleDesign of trolley attaching mechanism for unit load automated guided vehicle system

Published YearSeptember 2020

Indexed INScopus

Optimal production-inventory policy for closed-loop supply chain with remanufacturing under random demand and return

Journal

Journal NameOperational Research

Title of PaperOptimal production-inventory policy for closed-loop supply chain with remanufacturing under random demand and return

PublisherSpringer

Published YearSeptember 2020

ISSN/ISBN No1109-2858 (Print) 1866-1505 (Online)

Indexed INScopus, Web of Science

Environmentally conscious machining of Inconel 718 with solid lubricant assisted minimum quantity lubrication

Journal

Journal NameMetal Powder Report

Title of PaperEnvironmentally conscious machining of Inconel 718 with solid lubricant assisted minimum quantity lubrication

PublisherElsevier Advanced Technology

Volume Number76

Page NumberS24-S29

Published YearAugust 2020

Indexed INScopus, Web of Science

Experimental investigations on the applicability of solid lubricants in processing of AISI 4140 steel

Journal

Journal NameMaterials Today: Proceedings

Title of PaperExperimental investigations on the applicability of solid lubricants in processing of AISI 4140 steel

Volume Number26

Page Number2921 - 2925

Published YearJanuary 2020

Indexed INScopus

Study on the effect of process parameters with the use of minimum quantity lubrication and solid lubricants in turning

Journal

Journal NameIndian Journal of Engineering & Materials Sciences

Title of PaperStudy on the effect of process parameters with the use of minimum quantity lubrication and solid lubricants in turning

PublisherNISCAIR-CSIR, India

Volume Number26 9 (3-4)

Page Number220-225

Published YearJune 2019

Indexed INScopus, Web of Science

Effect of surface roughness on working of electromagnets

Book Chapter

Book NameTechnology Drivers: Engine for Growth

PublisherCRC Press

Author NameChirag Swamy, Bimal Mawandiya

Page Number249

Chapter TitleEffect of surface roughness on working of electromagnets

Published YearOctober 2018

Experimental investigations on the effect of process parameters with the use of minimum quantity solid lubrication in turning

Journal

Journal NameAIP Conference Proceedings

Title of PaperExperimental investigations on the effect of process parameters with the use of minimum quantity solid lubrication in turning

PublisherAmerican Institute of Physics

Volume Number1943

Published YearApril 2018

ISSN/ISBN No978-0-7354-1638-3

Indexed INScopus

Comparison of effectiveness of oil-jet lubrication systems for ball bearings

Conference

Title of PaperComparison of effectiveness of oil-jet lubrication systems for ball bearings

Proceeding NameNUiCONE

PublisherNirma University

Author NameVaghasiya, G. V. and Mawandiya, B. K

OrganizationNirma University

Year , VenueNovember 2017 , Nirma University, Ahmedabad

Production-inventory model for two-echelon closed-loop supply chain with finite manufacturing and remanufacturing rates

Journal

Journal NameInternational Journal of Systems Science: Operations and Logistics

Title of PaperProduction-inventory model for two-echelon closed-loop supply chain with finite manufacturing and remanufacturing rates

PublisherTaylor & Francis

Volume Number4 (3)

Page Number199-218

Published YearJuly 2017

ISSN/ISBN NoPrint: 2330-2674, online: 2330-2682

Indexed INScopus, Web of Science

Development of Short-Circuit Protection Trip Unit for Higher Rating Current of MCCB

Conference

Title of PaperDevelopment of Short-Circuit Protection Trip Unit for Higher Rating Current of MCCB

Proceeding NameNational Conference on Advances in Materials and Product Design

PublisherSVNIT, Surat

Author NameDodia, D., Mawandiya, B. K. and Bhatewara, N.

OrganizationSVNIT, Surat

Year , VenueJanuary 2017 , SVNIT, Surat

Development of Overload Protection Trip Unit for Higher Rating Current of MCCB

Journal

Journal NameJournal of Basic and Applied Engineering Research

Title of PaperDevelopment of Overload Protection Trip Unit for Higher Rating Current of MCCB

Volume Number3 (11)

Page Number1019-1021

Published YearSeptember 2016

Two-echelon closed-loop supply chain deterministic inventory models in a batch production environment

Journal

Journal NameInternational Journal of Sustainable Engineering

Title of PaperTwo-echelon closed-loop supply chain deterministic inventory models in a batch production environment

PublisherTaylor & Francis

Volume Number9 (5)

Page Number315-328

Published YearSeptember 2016

ISSN/ISBN NoPrint: 1939-7038, Online: 1939-7046

Indexed INScopus, Web of Science

Productivity Improvement of Rubber Roller Mixing Process using Cause and Effect Analysis: A case study

Journal

Journal NameNirma University Journal of Engineering and Technology (NUJET)

Title of PaperProductivity Improvement of Rubber Roller Mixing Process using Cause and Effect Analysis: A case study

PublisherNirma University

Volume Number5 (2)

Page Number24-31

Published YearJuly 2016

ISSN/ISBN No2231-2870

Application of fishbone diagram for modification of sheet metal tools: A case study

Book Chapter

Book NameMulti-disciplinary Sustainable Engineering: Current and Future Trends

PublisherCRC PRESS (Taylor & Francis Group)

Author NameKushal Pandya, Bimal Kumar Mawandiya, Bharat A Modi, Shashikant J Joshi

Page Number259

Chapter TitleApplication of fishbone diagram for modification of sheet metal tools: A case study

Published YearMay 2016

ISSN/ISBN No978-1-138-02845-6

A case study of productivity improvement of the grinding process in a rubber roller manufacturing industry

Book Chapter

Book NameMulti-disciplinary Sustainable Engineering: Current and Future Trends

PublisherCRC PRESS (Taylor & Francis Group)

Author NameDarshan Maniyar, Modi B. A., Patel K. M.

Page Number265

Chapter TitleA case study of productivity improvement of the grinding process in a rubber roller manufacturing industry

Published YearMay 2016

ISSN/ISBN No978-1-138-02845-6

An Application of Taguchi Parameter Design in Predicting and Optimizing the Machining Parameters for Face Milling Operation

Journal

Journal NameNirma University Journal of Engineering and Technology (NUJET)

Title of PaperAn Application of Taguchi Parameter Design in Predicting and Optimizing the Machining Parameters for Face Milling Operation

PublisherNirma University

Volume Number5 (1)

Page Number29-33

Published YearJanuary 2016

ISSN/ISBN No2231-2870

An Application of Value Stream Mapping in Production Flow Analysis: A Lean Approach in an Automotive Industry

Journal

Journal NameNirma University Journal of Engineering and Technology (NUJET)

Title of PaperAn Application of Value Stream Mapping in Production Flow Analysis: A Lean Approach in an Automotive Industry

PublisherNirma University

Volume Number5 (1)

Page Number21-28

Published YearJanuary 2016

ISSN/ISBN No2231-2870

Optimizing policy variables for a closed-loop supply chain in a manufacturer, remanufacturer and retailer

Conference

Title of PaperOptimizing policy variables for a closed-loop supply chain in a manufacturer, remanufacturer and retailer

Proceeding NameXIX Annual International Conference,

PublisherSociety of Operations Management

Author NameMawandiya, B. K., Jha, J. K. and Thakkar, J. J.

OrganizationSociety of Operations Management

Year , VenueDecember 2015 , Indian Institute of Management Calcutta

Implementation Of TPM In A Forging Unit – A Case Study

Conference

Title of PaperImplementation Of TPM In A Forging Unit – A Case Study

Proceeding NameInternational Conference on Advances in Industrial Engineering Applications -ICAIEA 2010

PublisherCollege of Engineering Guindy, Anna University

Author NameU.S. Chotalia, B.K. Mawandiya, V.R. Iyer

OrganizationCollege of Engineering Guindy, Anna University

Year , VenueJanuary 2010 , College of Engineering Guindy, Anna University

Page Number1-8 (RE06)

Reverse Logistics and its Needs: A Review

Conference

Title of PaperReverse Logistics and its Needs: A Review

Proceeding NameNATIONAL CONFERENCE ON CURRENT TRENDS IN TECHNOLOGY, ‘NUCONE–2009’

PublisherINSITIUTE OF TECHNOLOGY, NIRMA UNIVERSITY

Author NameB.K. Mawandiya, R.C. Gupta, K.M. Patel, V.R. Iyer

OrganizationNIRMA UNIVERSITY

Year , VenueNovember 2009 , INSITIUTE OF TECHNOLOGY, NIRMA UNIVERSITY

Page Number53-58

OEE – A tool for Implementation of TPM- A Case Study

Conference

Title of PaperOEE – A tool for Implementation of TPM- A Case Study

Proceeding NameNational Conference of Current Trends in Technology: NUCONE 2007

PublisherINSITIUTE OF TECHNOLOGY, NIRMA UNIVERSITY

Author NameB.K. Mawandiya, V.R. Iyer, U.S. Chotalia

OrganizationNIRMA UNIVERSITY

Page Number260-265

Published YearNovember 2007

Darshita Shah

Design and development of a quadruped ladder climbing robot using optimized PID parameters using genetic algorithm

Journal

Journal

Journal NameJournal of Field Robotics

Title of PaperDesign and multiobjective optimization of a two‐point contact ladder‐climbing robot using a genetic algorithm

Journal

Journal NameAmerican Institution of physics

Title of PaperDesign of climbing robot for inspection of telecom tower

PublisherAIP publishing house

Volume Number2946, 020007

Page Number14

Published YearNovember 2023

ISSN/ISBN No1551-7616

Indexed INScopus

A comprehensive review on deploying robotics application in telecom network tower's field maintenance: Challenges with current practices and feasibility analysis for robotics implementation

Journal

Purpose of the vibrating screen is to separate material in different sizes according to the requirement. This can be achieved by producing vibration with the exciter mechanism. The side wall plate of the vibrating screen is subjected to fatigue loading condition and critical zone is prone to initiate crack. This fatigue crack propagates and reach to its critical level and leads to the final failure of a plate. In order to prevent catastrophic failure and to save replacing and maintaining cost, it is highly required to identify critical zones in a plate where chances of initiation of cracks are more. This can be achieved by designing the plate from basic principles of the fatigue and fatigue crack growth for given loading conditions. The aim of present work is to identify complete loading condition and stress level of the side plate. First part of the present work involves the analysis of cracked and uncrack plate for given loading condition and critical values of stress and loads are found. The analysis is done using finite element technique and results are compared with acceptance criteria. In second part above results of the finite element analysis are utilized for redesigning and analyzing the vibrating screen for modification. The best design for the vibrating screen is proposed after various iterations and modifications. The different parts of the mechanism are modeled and assembled using CAD software and analysis is carried out using ANSYS software. The results for structural analysis of structure are found within permissible limits.

Darshit Upadhyay

Production of hydrogen-rich fuel gas from waste plastics using continuous plasma pyrolysis reactor

Journal

Journal NameJournal of Environmental Management

Title of PaperProduction of hydrogen-rich fuel gas from waste plastics using continuous plasma pyrolysis reactor

PublisherElsevier

Volume Number356

Published YearApril 2024

ISSN/ISBN NoKangana P. Bhatt a, Sanjay Patel a 1, Darshit S. Upadhyay b, Rajesh N. Patel

Indexed INScopus, Web of Science

Influence of secondary air opening on the performance of gasifier-based improved biomass cookstove

Conference

Title of PaperInfluence of secondary air opening on the performance of gasifier-based improved biomass cookstove

Proceeding Name2nd International Conference on Recent Advancements in Materials science And Nanotechnology (RAMAN)-2024

Author NameNiraj Shah, Kinnary Modi, Amita Chaudhary, Darshit Upadhyay, Chintan Patel, Shrey Desai

OrganizationNirma University

Year , VenueMarch 2024 , Nirma University

Strategic approach towards sustainability by promoting circular economy-based municipal solid waste management system- A review

Journal

Journal NameSustainable Chemistry and Pharmacy

Title of PaperStrategic approach towards sustainability by promoting circular economy-based municipal solid waste management system- A review

PublisherElsevier

Volume Number37

Published YearFebruary 2024

ISSN/ISBN No2352-5541

Indexed INScopus, Web of Science

Abstract

The evolution of population and swift urbanization has augmented the quantum of municipal solid waste (MSW) across the globe. The MSW has numerous problems, such as health issues, climate change, societal imbalance, etc. Decision-makers continuously investigate a practical and viable solution for eradicating the solid waste management issue. The circular economy offers a critical solution for managing solid waste with a more organized and constructive approach. The study proposes the key facets to design a solid waste management system driven by the circular economy. The circular economy framework emphasizes the 4 R’s- Reduce, Reuse, Recycle, and Recover. The review instils the importance of a waste collection and sorting station, waste treatment methods, and recovery of valuables from waste. The importance of policies and legislation in solid waste management systems with cases of developed countries are also discussed. The study further elaborates on the various aspects of the circular economy, including economic, social, and environmental paradigms. An insight into achieving sustainability through a circular economy-based MSW management system is presented. CE-based waste management offers eco-friendly business models, environmental justice, and upliftment of social well-being. The paper acknowledges the worldwide business groups that have adopted the circular economy and are trying to achieve sustainability. The opportunities cited by globally renowned organizations to limit waste generation and observe material recycling and reuse in their workspace and products have also been highlighted. The study offers an understanding of the system that brings prosperity and harmony to society.

In-depth analysis of the effect of catalysts on plasma technologies for treatment of various wastes

Journal

Journal NameJournal of Environmental Management

Title of PaperIn-depth analysis of the effect of catalysts on plasma technologies for treatment of various wastes

PublisherElsevier

Volume Number344

Published YearOctober 2023

ISSN/ISBN No1095-8630

Indexed INScopus, Web of Science

Improvement of syngas quality in fixed bed gasifier using CaMg(CO3)2 catalyst

Conference

Title of PaperImprovement of syngas quality in fixed bed gasifier using CaMg(CO3)2 catalyst

Proceeding Name10th International Conference of Fluid Flow, Heat and Mass Transfer (FFHMT 2023)

Author NameDarshit S Upadhyay, Amita Chaudhary, Akshit Trada, Dhruvil Patel, Rajesh N Patel

OrganizationInternational ASET Inc.

Year , VenueJune 2023 , Carleton University, Ottawa, Canada

Slow pyrolysis of low-density Poly-Ethylene (LDPE): A batch experiment and thermodynamic analysis

Journal

Journal NameEnergy

Title of PaperSlow pyrolysis of low-density Poly-Ethylene (LDPE): A batch experiment and thermodynamic analysis

PublisherElsevier

Volume Number263(B)

Published YearJanuary 2023

ISSN/ISBN No1873-6785

Indexed INScopus, Web of Science

Optimization of solar and battery-based hybrid renewable energy system augmented with bioenergy and hydro energy-based dispatchable source

Journal

Journal Nameiscience

Title of PaperOptimization of solar and battery-based hybrid renewable energy system augmented with bioenergy and hydro energy-based dispatchable source

PublisherCell Press, Elsevier

Volume Number26 (1)

Published YearJanuary 2023

ISSN/ISBN No2589-0042

Indexed INScopus, Web of Science

Numerical Simulation of Gasification and Plasma Pyrolysis Process for Lignite Coal – A Comparative Study

Conference

Title of PaperNumerical Simulation of Gasification and Plasma Pyrolysis Process for Lignite Coal – A Comparative Study

Proceeding NameProceedings of the 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP)

Author NameSidhartha Sondh, D. S. Upadhyay, Sanjay Patel, and R. N. Patel

OrganizationFluid Mechanics and Fluid Power (FMFP)

Year , VenueDecember 2022 , IIT Roorkee

An alternative fuel production from sawdust through batch-type pyrolysis reactor: Fuel properties and thermodynamic analysis

Journal

Journal NameProcess Safety and Environmental Protection

Title of PaperAn alternative fuel production from sawdust through batch-type pyrolysis reactor: Fuel properties and thermodynamic analysis

PublisherElsevier

Volume Number167

Page Number332-342

Published YearNovember 2022

ISSN/ISBN No0957-5820

Indexed INScopus, Web of Science

Sustainable utilization of bamboo through air-steam gasification in downdraft gasifier: Experimental and simulation approach

Journal

Journal NameEnergy

Title of PaperSustainable utilization of bamboo through air-steam gasification in downdraft gasifier: Experimental and simulation approach

PublisherElsevier

Volume Number252

Published YearAugust 2022

ISSN/ISBN No0360-5442

Indexed INScopus, Web of Science

A critical review on solid waste treatment using plasma pyrolysis technology

Journal

Journal NameChemical Engineering and Processing - Process Intensification

Title of PaperA critical review on solid waste treatment using plasma pyrolysis technology

PublisherElsevier

Volume Number177

Published YearJuly 2022

ISSN/ISBN No1873-3204

Indexed INScopus, Web of Science

Investigation on plasma pyrolysis process with municipal solid waste/refused derived fuel as feedstock

Journal

Journal NameJournal of Cleaner Production

Title of PaperInvestigation on plasma pyrolysis process with municipal solid waste/refused derived fuel as feedstock

PublisherElsevier

Volume Number356

Published YearJuly 2022

ISSN/ISBN No0959-6526

Indexed INScopus, Web of Science

Optimal configuration of solar and wind-based hybrid renewable energy system with and without energy storage including environmental and social criteria: A case study

Journal

Journal NameJournal of Energy Storage

Title of PaperOptimal configuration of solar and wind-based hybrid renewable energy system with and without energy storage including environmental and social criteria: A case study

PublisherElsevier

Volume Number44-B

Published YearDecember 2021

ISSN/ISBN No2352-152X

Indexed INScopus, Web of Science

Experimental Investigations and Thermal Analysis of a Natural Draft Improved Biomass Cookstove with Different Air Conditions

Conference

Title of PaperExperimental Investigations and Thermal Analysis of a Natural Draft Improved Biomass Cookstove with Different Air Conditions

Proceeding NameAdvances in Thermal-Fluid Engineering (ATFE 2021)

Author NameKinnari Modi and Darshit S Upadhyay

OrganizationPandit Deendayal Energy University

Year , VenueMarch 2021 , Pandit Deendayal Energy University, Gandhinagar

Air-Steam gasification of lignite in a fixed bed gasifier: Influence of steam to lignite ratio on performance of downdraft gasifier Energy

Journal

Journal NameEnergy

Title of PaperAir-Steam gasification of lignite in a fixed bed gasifier: Influence of steam to lignite ratio on performance of downdraft gasifier Energy

PublisherElsevier

Volume Number211

Page Number11

Published YearJune 2020

ISSN/ISBN No0360-5442

Indexed INScopus

A comprehensive review and a systematic approach to enhance the performance of improved cookstove (ICS)

Journal

Journal NameJournal of Thermal Analysis and Calorimetry

Title of PaperA comprehensive review and a systematic approach to enhance the performance of improved cookstove (ICS)

PublisherSpringer

Volume Number141

Page Number2253-2263

Published YearMay 2020

ISSN/ISBN No1588-2926

Indexed INScopus, Web of Science

Effect of catalyst to lignite ratio on the performance of a pilot scale fixed bed gasifier

Journal

Journal NameEnergy

Title of PaperEffect of catalyst to lignite ratio on the performance of a pilot scale fixed bed gasifier

PublisherElsevier

Volume Number189

Published YearDecember 2019

ISSN/ISBN No0360-5442

Indexed INScopus, Web of Science

Effect of Equivalence Ratio on the Performance of the Downdraft Gasifier – An Experimental and Modelling Approach

Journal

Journal NameEnergy

Title of PaperEffect of Equivalence Ratio on the Performance of the Downdraft Gasifier – An Experimental and Modelling Approach

PublisherElsevier

Volume Number168

Page Number833-846

Published YearFebruary 2019

ISSN/ISBN No0360-5442

Indexed INScopus, Web of Science

Abstract

This paper deals with experimental and modelling studies carried out for different Equivalence Ratio (ER). Seven different ER (0.24–0.386) were selected to investigate the downdraft gasifier performance. The lignite and sawdust briquette (70:30, %wt.) were used as feedstock in a 10 kWe atmospheric pressure downdraft gasifier. The fuel consumption and air consumption were observed to exist in the r

Performance evaluation of 10 kWe pilot scale downdraft gasifier with different feedstock

Journal

Journal NameJournal of Energy Institute

Title of PaperPerformance evaluation of 10 kWe pilot scale downdraft gasifier with different feedstock

PublisherElsevier

Published YearJanuary

ISSN/ISBN No1743-9671

Indexed INScopus, Web of Science

Abstract

Gasification is a thermochemical conversion of carbonaceous biomass into the producer gas. Gasification of lignite, wood, sawdust briquette and their mixtures are investigated on a 10 kWe laboratory scale downdraft gasifier at atmospheric pressure. The air is used as a gasifying medium. The gasifier was operated on different particle sizes of lignite and lignite-wood ratio; 22–25 mm lignite partic

Elemental and heat loss analysis of different feedstock in the downdraft gasifier

Conference

Title of PaperElemental and heat loss analysis of different feedstock in the downdraft gasifier

Proceeding NameProceedings of the Third International Conference on Sustainable Energy and Environmental Challenges (3rd SEEC)

Author NameAnil Kumar V. Sakhiya, Apoorv Chaturvedi, Vivek Barasara, , Krunal R. Panchal, Darshit S. Upadhyay, Rajesh N. Patel

OrganizationInternational Society for Energy, Environment and Sustainability

Year , VenueDecember 2018 , IIT Roorkee, India

Strategies for Producer Gas Cleaning in Biomass Gasification: A Review

Book Chapter

Book NameConference Proceedings of the Second International Conference on Recent Advances in Bioenergy Research

PublisherSpringer Proceedings in Energy, Springer Singapore

Author NameDr. Sachin Kumar, Dr. Rajesh K. Sani, Prof. Y. K. Yadav

Chapter TitleStrategies for Producer Gas Cleaning in Biomass Gasification: A Review

Published YearSeptember 2018

ISSN/ISBN No978-981-10-6107-3

Thermodynamic Analysis of Lignite Gasification in the Downdraft Gasifier

Conference

Title of PaperThermodynamic Analysis of Lignite Gasification in the Downdraft Gasifier

Proceeding NameSecond International Conference on Sustainable Energy and Environmental Challenges (SEEC-2018)

Author NameDarshit S. Upadhyay, Anil Kumar V. Sakhiya, Krunal R. Panchal, Rajesh N. Patel

OrganizationInternational Society for Energy, Environment and Sustainability

Year , VenueJanuary 2018 , Indian Institute of Science, Bengaluru

Importance of Catalysts for Tar Elimination In Gasification Processes: A Review

Conference

Title of PaperImportance of Catalysts for Tar Elimination In Gasification Processes: A Review

Proceeding Name1st International and the 18th ISME Conference on Enabling Sustainable Development in Mechanical Engineering

Author NameProf. G. Amba Prasad Rao / Prof. N. Selvaraj

Organization Indian Society of Mechanical Engineers (ISME)

Year , VenueFebruary 2017 , NIT Warangal

Gasification of lignite in a fixed bed reactor: Influence of particle size on performance of down draft gasifier

Journal

Journal NameEnergy

Title of PaperGasification of lignite in a fixed bed reactor: Influence of particle size on performance of down draft gasifier

PublisherElsevier

Volume Number78

Published YearDecember 2014

ISSN/ISBN No0360-5442

Indexed INScopus, Web of Science

Abstract

Dhaval Shah

Tape spring for deployable space structures: A review

Journal

Journal NameAdvances in Space Research

Title of PaperTape spring for deployable space structures: A review

PublisherElsevier

Volume Number73

Page Number5188-5219

Published YearMarch 2024

ISSN/ISBN No0273-1177

Indexed INScopus, Web of Science

Design and Development of Endurance Test Unit for the Design Modification of ROM for the Safety Enhancement of MCCB

Conference

Title of PaperDesign and Development of Endurance Test Unit for the Design Modification of ROM for the Safety Enhancement of MCCB

Proceeding Name2nd International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences

OrganizationIITRAM & SSME

Year , VenueJanuary 2024 , Ahmedabad

Design and development of chassis for formula student vehicle using FE analysis

Journal

Journal NameAIP Conference Procedings

Title of PaperDesign and development of chassis for formula student vehicle using FE analysis

PublisherAIP

Volume Number2901

Published YearDecember 2023

ISSN/ISBN No1551-7616

Indexed INScopus, Web of Science

Development of a prototype of a floor cleaning robot

Journal

Journal NameAIP Conference Procedings

Title of PaperDevelopment of a prototype of a floor cleaning robot

PublisherAIP

Volume Number2946

Page Number020008

Published YearNovember 2023

ISSN/ISBN No1551-7616

Indexed INScopus, Web of Science

A Comparative Analysis of Various Deep-Learning Models for Noise Suppression

Journal

Journal NameEAI Endorsed Transactions on Internet of Things

Title of PaperA Comparative Analysis of Various Deep-Learning Models for Noise Suppression

PublisherEuropean Alliance for Innovation

Volume Number10

Published YearNovember 2023

ISSN/ISBN No2414-1399

Indexed INScopus, EBSCO

Developments in 3D Printing of Carbon Fiber Reinforced Polymer Containing Recycled Plastic Waste: A Review

Journal

Journal NameCleaner Materials

Title of PaperDevelopments in 3D Printing of Carbon Fiber Reinforced Polymer Containing Recycled Plastic Waste: A Review

PublisherElsevier

Volume Number9

Published YearSeptember 2023

ISSN/ISBN No2772-3976

Indexed INScopus, Web of Science

Low Voltage Systems for Electric ATVs

Conference

Title of PaperLow Voltage Systems for Electric ATVs

Proceeding NameIEEE Xplore

PublisherIEEE

Author NameT. Selarka, H. Gajjar, Y. Chauhan, P. N. Kapil, D. B. Shah and A. M. Lakdawala

OrganizationIEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET)

Year , VenueAugust 2023 , Bhubaneswar, India, 2023,

Page Number1-7

ISSN/ISBN No979-8-3503-1997-23

Indexed INScopus

Finite element simulation of additive manufacturing process of carbon allotropes

Journal

Journal NameInternational Journal on Interactive Design and Manufacturing

Title of PaperFinite element simulation of additive manufacturing process of carbon allotropes

PublisherSpringer

Published YearMarch 2023

Book Chapter

Book NameRecent Advances in Manufacturing Modelling and Optimization

PublisherSpringer

Page Number427–437

Chapter TitleEvaluation of alternate material of a bush for reducing fretting wear damage in a bush-pin joint

Published YearJune 2021

ISSN/ISBN No978-981-16-9951-1

Indexed INScopus

Thermo-Mechanical Analysis of Functionally Graded Material for Cylindrical Shell Subjected to Internal Pressure for Varying Volume Gradation

Book Chapter

Book NameAdvances in Engineering Design

PublisherSpringer Publication

Page Number125-136

Chapter TitleThermo-Mechanical Analysis of Functionally Graded Material for Cylindrical Shell Subjected to Internal Pressure for Varying Volume Gradation

Published YearMarch 2021

ISSN/ISBN NoISBN: 978-981-334-683-3

Indexed INScopus

Experimental Investigations on Process Parameters for Manufacturing of Antenna Reflectors using Vacuum Infusion Process

Journal

Journal NameSPE Polymers

Title of PaperExperimental Investigations on Process Parameters for Manufacturing of Antenna Reflectors using Vacuum Infusion Process

PublisherWiley

Volume Number2

Page Number19-27

Published YearFebruary 2021

ISSN/ISBN No2690-3857

Indexed INOthers

Effect of Size, Location, and Number of Impurities on Natural Frequency for GFRP Composite Cantilever Beam

Conference

Title of PaperEffect of Size, Location, and Number of Impurities on Natural Frequency for GFRP Composite Cantilever Beam

Proceeding NameInternational Conference on Materials and Technologies

OrganizationNational Institute of Technology Raipur

Year , VenueJanuary 2021 , Raipur, India

Carbon Fiber Permeability Characterization using VARTM Process

Journal

Journal NameMaterials Today Proceedings

Title of PaperCarbon Fiber Permeability Characterization using VARTM Process

PublisherElsevier

Volume Number44

Page Number1560-1563

Published YearDecember 2020

ISSN/ISBN No2214-7853

Indexed INScopus, Web of Science

Automatic Generation of Tool Path from Point Cloud Input for Sculpture Surface Machining

Journal

Journal NameInternational Journal of Advanced Science and Technology

Title of PaperAutomatic Generation of Tool Path from Point Cloud Input for Sculpture Surface Machining

PublisherScience and Engineering Research Support Society

Volume Number29

Page Number12384 - 12395

Published YearOctober 2020

ISSN/ISBN No2005-4238

Indexed INOthers

Investigation on Design Methods for Cable Mesh Configuration of Deployable Space Antenna Reflector

Journal

Journal NameInternational Journal of Space Structures

Title of PaperInvestigation on Design Methods for Cable Mesh Configuration of Deployable Space Antenna Reflector

PublisherSage Publication

Volume Number34

Page Number126-134

Published YearSeptember 2020

ISSN/ISBN No0956-0599

Indexed INScopus, Web of Science

Design Modification in Front Door of Oven for Rotomoulding Machine

Conference

Title of PaperDesign Modification in Front Door of Oven for Rotomoulding Machine

Proceeding Name1st International Conference on Future Engineering, ICFE.

OrganizationDr. Rammanohar Lohia Avadh University, Ayodhya.

Published YearJune 2020

ISSN/ISBN NoISBN: 978-93-5407-564-3.

Experimental Study of Thickness Gradient and Flow Simulation in VARTM Process

Journal

Journal NameFibers and Polymers

Title of PaperExperimental Study of Thickness Gradient and Flow Simulation in VARTM Process

PublisherSpringer

Volume Number21

Page Number384-391

Published YearFebruary 2020

ISSN/ISBN No1229-9197

Indexed INScopus, PubMed, Web of Science, Indian citation Index

Analysis of Process Parameters for Composites Manufacturing using Vacuum Infusion Process

Journal

Journal NameMaterials Today Proceedings

Title of PaperAnalysis of Process Parameters for Composites Manufacturing using Vacuum Infusion Process

PublisherElsevier

ISSN/ISBN No978-981-32-9071-6

Indexed INScopus, Web of Science, Indian citation Index

Estimation of Distortion for CFRP Antenna Reflector during Autoclave Processing

Book Chapter

Book NameAdvances in Computational Methods in Manufacturing

PublisherSpringer

Page Number657-667

Chapter TitleEstimation of Distortion for CFRP Antenna Reflector during Autoclave Processing

Published YearOctober 2019

ISSN/ISBN No978-981-32-9071-6

Indexed INScopus, Web of Science, Indian citation Index

Experimental Study on Spring-in Deformation for L-shape CFRP Components

Journal

Journal NameIOP Conference Series: Materials Science and Engineering

Title of PaperExperimental Study on Spring-in Deformation for L-shape CFRP Components

PublisherIOP Publishing Ltd.

Volume Number561

Page Number1-7

Published YearOctober 2019

ISSN/ISBN No1757-8981

Indexed INScopus, Web of Science, Indian citation Index

Experimental and simulation investigation on spring-in deformation for L-shape component

Journal

Journal NameCurved and Layered Structures

Title of PaperExperimental and simulation investigation on spring-in deformation for L-shape component

PublisherDe Gruyter

Volume Number6

Page Number169-180

Published YearAugust 2019

ISSN/ISBN No2353-7396

Indexed INScopus, PubMed, Web of Science, Indian citation Index

Thermo-Mechanical Analysis of Functionally Graded Material Plate under Transverse Loading for Varying Volume Gradation

Journal

Journal NameAdvanced Materials Research

Title of PaperThermo-Mechanical Analysis of Functionally Graded Material Plate under Transverse Loading for Varying Volume Gradation

PublisherTrans Tech

Volume Number1155

Page Number81-88

Published YearJuly 2019

ISSN/ISBN No1662-8985

Indexed INIndian citation Index

Thermo-mechanical characterization of carbon fiber composites with different epoxy resin systems

Journal

Journal NameThermochimica Acta

Title of PaperThermo-mechanical characterization of carbon fiber composites with different epoxy resin systems

PublisherElsevier

Volume Number676

Page Number39-46

Published YearJune 2019

Indexed INScopus, Web of Science, Indian citation Index, UGC List

Prediction of Spring-back Deformation for CFRP Reflectors Manufactured using Various Processes

Journal

Journal NameInternational Journal of Applied Engineering Research

Title of PaperPrediction of Spring-back Deformation for CFRP Reflectors Manufactured using Various Processes

PublisherResearch India

Volume Number13

Page Number144-148

Published YearFebruary 2019

ISSN/ISBN No0973-4562

Indexed INIndian citation Index

Experimental investigation on spring-back deformation during autoclave curing of parabolic antenna reflectors

Journal

Journal NameComposites Part A: Applied Science and Manufacturing

Title of PaperExperimental investigation on spring-back deformation during autoclave curing of parabolic antenna reflectors

PublisherElsevier

Volume Number115

Page Number134-146

Published YearDecember 2018

Indexed INScopus, Web of Science, UGC List

Effect of Laser Engraving on L-Shaped CFRP Components during Curing Process

Book Chapter

Book NameTechnology Drivers: Engine for Growth

PublisherCRC Press

Page Number289-294

Chapter TitleEffect of Laser Engraving on L-Shaped CFRP Components during Curing Process

Published YearOctober 2018

ISSN/ISBN No978-1-138-56042-0

Indexed INIndian citation Index

Experimental Investigations on Process Parameters for Manufacturing of Antenna Reflectors using Vacuum Infusion Process

Conference

Title of PaperExperimental Investigations on Process Parameters for Manufacturing of Antenna Reflectors using Vacuum Infusion Process

Proceeding NameSeminar on Composite Materials for General Engineering, Armour and Aerospace Applications

OrganizationPSG College of Technology

Year , VenueSeptember 2018 , Coimbatore

Determination of Natural Frequency for CFRP Composite Satellite Antenna Reflector using Vibration Analysis

Journal

Journal NameNirma University Journal of Engineering and Technology

Title of PaperDetermination of Natural Frequency for CFRP Composite Satellite Antenna Reflector using Vibration Analysis

PublisherNirma University

Volume Number6

Page Number21-25

Published YearAugust 2018

ISSN/ISBN No2231-2870

Indexed INOthers

Conference

Title of PaperDesign and Analysis of Ball Valve for Cryogen Flow Isolation at -196 °C Temperature

Proceeding NameProceedings of the 6th Nirma University International Conference on Engineering

OrganizationNirma University

Year , VenueNovember 2017 , Ahmedabad

Structural Analysis of CFRP Layered Laminate under Bi-Axial Loading

Journal

Journal NameApplied Mechanics and Materials

Title of PaperStructural Analysis of CFRP Layered Laminate under Bi-Axial Loading

PublisherTrans Tech Publications

Volume Number867

Page Number212-219

Published YearMay 2017

ISSN/ISBN No1662-7482

Indexed INWeb of Science, Indian citation Index, UGC List

Design and Optimization of Fabrication Fixtures for the Pressure Vessel Assembly

Conference

Title of PaperDesign and Optimization of Fabrication Fixtures for the Pressure Vessel Assembly

Proceeding Name3rd International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering

OrganizationI.T.S Engineering College

Year , VenueApril 2017 , Greater Noida

ISSN/ISBN No978-93-85537-06-6

Chronological Design and Optimization of Assembly Manufacturing Fixtures for the Cryogenic Pressure Vessel

Conference

Title of PaperChronological Design and Optimization of Assembly Manufacturing Fixtures for the Cryogenic Pressure Vessel

Proceeding Name1st International and 18th ISME Conference

OrganizationNIT Warangal

Year , VenueFebruary 2017 , Warangal

Taguchi Method: Plasma Cutting Parameters

Book Chapter

Book NameEncyclopedia of Plasma Technology

PublisherCRC Press

Page Number1389-1395

Chapter TitleTaguchi Method: Plasma Cutting Parameters

Published YearFebruary 2017

ISSN/ISBN No978-14-66500-59-4

Indexed INIndian citation Index

Design and Development of House Cleaning Robot

Conference

Title of PaperDesign and Development of House Cleaning Robot

Proceeding Name3rd International Conference on Multidisciplinary Research & Practice

OrganizationResearch and Scientific Innovation Society

Year , VenueDecember 2016 , AMA, Ahmedabad

Page Number27-30

Prediction of Dimensional Accuracy for Carbon Fibre Reinforced Polymer (CFRP) Reflectors Manufacturing

Conference

Title of PaperPrediction of Dimensional Accuracy for Carbon Fibre Reinforced Polymer (CFRP) Reflectors Manufacturing

Proceeding NameInternational Conference on Advances in Materials & Manufacturing

OrganizationDRDL

Year , VenueDecember 2016 , Hyderabad

ISSN/ISBN No978-93-86256-19-5

Effect of Fiber Orientation on Glass Transition Temperature for Carbon Fiber Reinforced Polymer Material

Conference

Title of PaperEffect of Fiber Orientation on Glass Transition Temperature for Carbon Fiber Reinforced Polymer Material

Proceeding NameFourth International Conference on Polymer Processing and Characterization

OrganizationMahatma Gandhi University, Kottayam

Year , VenueDecember 2016 , Kerala

CFD Analysis and Design Optimization of Cryogenic Ball Valve

Conference

Title of PaperCFD Analysis and Design Optimization of Cryogenic Ball Valve

Proceeding Name6th International and 43rd National Conference on Fluid Mechanics and Fluid Power

OrganizationMNNIT

Year , VenueDecember 2016 , Allahabad

ISSN/ISBN No978-93-5267-407-7

Prediction of Geometric Unconformities in Thin Composite Parts Manufacturing

Conference

Title of PaperPrediction of Geometric Unconformities in Thin Composite Parts Manufacturing

Proceeding Name6th International & 27th All India Manufacturing Technology, Design and Research Conference

OrganizationCollege of Engineering, Pune

Page Number2124-2126

Published YearDecember 2016

ISSN/ISBN No978-93-86256-27-0

Prediction of Spring-in Deformation for L-Shaped CFRP Components

Conference

Title of PaperPrediction of Spring-in Deformation for L-Shaped CFRP Components

Proceeding NameSixth International Congress on Computational Mechanics and Simulation

Journal

Journal NameIndustrial Lubrication and Tribology

Title of PaperAnalyzing Hertzian contact stress developed in a double row spherical roller bearing and its effect on fatigue life

PublisherEmrald

Volume Number68

Page Number361-368

Published YearMay 2016

ISSN/ISBN No0036-8792

Indexed INScopus, Web of Science, Indian citation Index

Design Modification and Analysis of Fixture to Accommodate Different System Turbine Casing

Journal

Journal NameJournal for Research

Title of PaperDesign Modification and Analysis of Fixture to Accommodate Different System Turbine Casing

Volume Number2

Page Number14-21

Published YearApril 2016

ISSN/ISBN No2395-7549

Indexed INOthers

Design and Analysis of Vibrating Screen with Vibromotor

Conference

Title of PaperDesign and Analysis of Vibrating Screen with Vibromotor

Proceeding NameNational Conference on Design, Analysis and Optimization in Mechanical Engineering

OrganizationM. S. University

Year , VenueMarch 2016 , Baroda

ISSN/ISBN No978-93-5258-831-2

Design and Analysis of Side Wall Plate for Sinter Vibrating Screen

Conference

Title of PaperDesign and Analysis of Side Wall Plate for Sinter Vibrating Screen

Proceeding Name3rd International Conference on Industrial Engineering

OrganizationSVNIT

Year , VenueNovember 2015 , Surat

ISSN/ISBN No978-93-84935-56-6

Theoretical Design and CFD Analysis of Cyclonic Separator for Sinter Plant

Conference

Title of PaperTheoretical Design and CFD Analysis of Cyclonic Separator for Sinter Plant

Proceeding Name3rd International Conference on Industrial Engineering

OrganizationSVNIT

Year , VenueNovember 2015 , Surat

ISSN/ISBN No978-93-84935-56-6

Design Modification of Draft Tube for Hydro Power Plant using CFD Analysis

Conference

Title of PaperDesign Modification of Draft Tube for Hydro Power Plant using CFD Analysis

Proceeding Name6th International Conference on Engineering, Project, and Production Management

OrganizationGriffith University

Year , VenueSeptember 2015 , Australia

Page Number467-475

ISSN/ISBN No978-1-922216-76-2

Experimental Verification for Life Prediction and Modal Analysis of a Cracked Polystyrene Beam under Fatigue Loading

Conference

Title of PaperExperimental Verification for Life Prediction and Modal Analysis of a Cracked Polystyrene Beam under Fatigue Loading

Proceeding NameInternational Conference on Engineering: Issues, Opportunities and Challenges for Development

OrganizationS.N. Patel Institute of Technology & Research Centre

Year , VenueApril 2015 , Bardoli

ISSN/ISBN No978-81-929339-1-7

Design Automation and CFD Analysis of Draft Tube for Hydro Power Plant

Conference

Title of PaperDesign Automation and CFD Analysis of Draft Tube for Hydro Power Plant

Proceeding NameInternational Conference on Mechanical, Aeronautics and Production Engineering

Year , VenueApril 2015 , Australia

ISSN/ISBN No978-93-82702-92-4

Journal

Journal NameProcedia Technology

Title of PaperExperimentation and Its Prediction of Process Parameters Effects on Elongation in Tensile Test of AISI 1008 Steel using ANN Model

PublisherElsevier

Volume Number14

Page Number282-289

Published YearSeptember 2014

ISSN/ISBN No2212-0173

Indexed INScopus, Web of Science, Indian citation Index

Optimization of Plasma Arc Cutting Parameters using Taguchi Method

Conference

Title of PaperOptimization of Plasma Arc Cutting Parameters using Taguchi Method

Proceeding NameInternational Conference on Innovative Advancements in Engineering and Technology

OrganizationJaipur National University

Year , VenueMarch 2014 , Rajasthan

Page Number111-114

Machine Setup Time Reduction and Productivity Improvement for Cylindrical Roller Bearing

Conference

Title of PaperMachine Setup Time Reduction and Productivity Improvement for Cylindrical Roller Bearing

Proceeding NameInternational Conference on Industrial Engineering

OrganizationSVNIT

Year , VenueNovember 2013 , Surat

Page Number999-1004

ISSN/ISBN No978-93-83083-37-4

Pressure Vessel Design against Wind and Seismic Load

Conference

Title of PaperPressure Vessel Design against Wind and Seismic Load

Proceeding NameProceedings of the 4th Nirma University International Conference on Engineering

OrganizationNirma University

Year , VenueNovember 2013 , Ahmedabad

Parametric Study of Nozzle Dimensions on Stress Concentration Factor for Pressure Vessel

Conference

Title of PaperParametric Study of Nozzle Dimensions on Stress Concentration Factor for Pressure Vessel

Proceeding NameProceedings of the 4th Nirma University International Conference on Engineering

OrganizationNirma University

Year , VenueNovember 2013 , Ahmedabad

Various Numerical Analysis of Composite Leaf Spring for Light Vehicle Mini Truck

Conference

Title of PaperVarious Numerical Analysis of Composite Leaf Spring for Light Vehicle Mini Truck

Proceeding NameProceedings of the 4th Nirma University International Conference on Engineering

OrganizationNirma University

Year , VenueNovember 2013 , Ahmedabad

Analysis of Composite Leaf Spring Using FEA for Light Vehicle Mini Truck

Conference

Title of PaperAnalysis of Composite Leaf Spring Using FEA for Light Vehicle Mini Truck

Proceeding NameInternational Conference on Research & Development in Engineering, Technology & Sciences

Page Number424-428

Published YearOctober 2013

ISSN/ISBN No978-81-906220-8-0

Contact Stress Analysis for Rollers and Inner Ring Assembly of Spherical Roller Bearing

Conference

Title of PaperContact Stress Analysis for Rollers and Inner Ring Assembly of Spherical Roller Bearing

Proceeding NameInternational Conference on Advances in Tribology & Engineering Systems

OrganizationGTU

Year , VenueOctober 2013 , Ahmedabad

Parametric Modeling and Drawing Automation for Flange Coupling Using Excel Spreadsheet

Journal

Journal NameInternational Journal of Research in Engineering & Technology

Title of PaperParametric Modeling and Drawing Automation for Flange Coupling Using Excel Spreadsheet

PublisherImpact Journals

Volume Number1

Page Number187-192

Published YearJuly 2013

ISSN/ISBN No2321-8843

Indexed INOthers

3D Parametric Modeling for Product Variants Using Case Study on Inner Ring of Spherical Roller Bearing

Journal

Journal NameProcedia Engineering

Title of Paper3D Parametric Modeling for Product Variants Using Case Study on Inner Ring of Spherical Roller Bearing

PublisherElsevier

Volume Number51

Page Number709-714

Published YearMay 2013

ISSN/ISBN No1877-7058

Indexed INScopus, PubMed, Web of Science, Indian citation Index

Overall Equipment Effectiveness (OEE) Calculation - Automation through Hardware & Software Development

Journal

Journal NameProcedia Engineering

Title of PaperOverall Equipment Effectiveness (OEE) Calculation - Automation through Hardware & Software Development

PublisherElsevier

Volume Number51

Page Number579-584

Published YearApril 2013

ISSN/ISBN No1877-7058

Indexed INScopus, PubMed, Web of Science, Indian citation Index

Total Productive Maintenance (TPM) Implementation in a Machine Shop: A Case Study

Journal

Journal NameProcedia Engineering

Title of PaperTotal Productive Maintenance (TPM) Implementation in a Machine Shop: A Case Study

PublisherElsevier

Volume Number51

Page Number592-599

Published YearApril 2013

ISSN/ISBN No1877-7058

Indexed INScopus, PubMed, Web of Science, Indian citation Index

Software Development for Crack Analysis of a Central Cracked Plate under Tension for Determination of SIF

Conference

Title of PaperSoftware Development for Crack Analysis of a Central Cracked Plate under Tension for Determination of SIF

Proceeding NameInternational Conference on Recent trends in Engineering

OrganizationNirma University

Year , VenueDecember 2011 , Ahmedabad

Simulation and Modification of Microwave Package for Space Communication Payload

Conference

Title of PaperSimulation and Modification of Microwave Package for Space Communication Payload

Proceeding NameNational Conference on Recent trends in Engineering

OrganizationNirma University

Year , VenueDecember 2009 , Ahmedabad

FE Simulation and Experimental validation for a Space Microwave Package

Conference

Title of PaperFE Simulation and Experimental validation for a Space Microwave Package

Proceeding NameRADIANCE

OrganizationIIT Bombay

Year , VenueApril 2009 , Mumbai

Dhaval Patel

Anomaly Detection in Rolling Element Bearing Using Spectral Dissimilarity Index Approach

Book Chapter

Book NameAIP Conference Proceedings

PublisherAIP Publishing

Author NameDhaval V Patel, Vipul M Bhojawala, Kaushik M Patel

Chapter TitleAnomaly Detection in Rolling Element Bearing Using Spectral Dissimilarity Index Approach

Published YearDecember 2023

ISSN/ISBN No1551-7616

Indexed INScopus

Rolling Element Bearing Fault Diagnosis Using an Integrated Approach Incorporating Teager–Kaiser Energy Operator and Singluar Spectrum Analysis

Journal

Journal NameJournal of Vibration Engineering and Technologies

Title of PaperRolling Element Bearing Fault Diagnosis Using an Integrated Approach Incorporating Teager–Kaiser Energy Operator and Singluar Spectrum Analysis

PublisherSpringer

Volume Number11

Page Number3859–3878

Published YearDecember 2023

ISSN/ISBN No2523-3939

In many of our developing countries, we face many problems regarding agro-waste. If the wastes are not managed then there will be increased in the quantity of waste. In order to manage these wastes, solutions are required and one of the solution is discussed here. The present study discusses about the hydraulic briquette line which is used to make briquettes. This hydraulic briquette line basically consists of three equipment's a shredder machine, a screw conveyor and a hydraulic briquette machine. Because of good characteristics of sugar-cane bagasse such as low ash content compared to coal, lignin cells are present which acts as a binder, etc., it has been used for making briquettes. Bagasse having long tissues, it is first cut into small parts with the help of shredding machine. These cut bagasse is conveyed to the hydraulic briquette machine with the help of screw conveyor. This conveyed bagasse is compressed in hydraulic briquette machine with the help of hydraulic cylinders. This paper discusses the detailed design of all three equipment i.e. a hydraulic briquette machine, a screw conveyor and a shredding machine.

Guidelines for Designing Critical Parameters of Split Mechanical Seal

Conference

Title of PaperGuidelines for Designing Critical Parameters of Split Mechanical Seal

Proceeding Name13th International Conference on Advances in Computing, Control, and Telecommunication Technologies, ACT 2022

Author NameAbhishek Patel, Dhaval Patel, Vipul Bhojawala, Bimalkumar Mawandiya

OrganizationIDES

Year , VenueJune 2022 , Hyderabad

Page Number252 - 256

Indexed INScopus

Analysis of Discontinuity Stress at Shell and Elliptical Head Juncture Using Theory of Beam on Elastic Foundation

Conference

Title of PaperAnalysis of Discontinuity Stress at Shell and Elliptical Head Juncture Using Theory of Beam on Elastic Foundation

Proceeding NameFourth International Conference on Materials Science and Manufacturing Technology 2022(ICMSMT 2022)

PublisherAkshaya Collage of Engineering and Technology, Coimbatore, Tamilnadu

Author NameVipul Bhojawala, Dhaval V Patel

OrganizationAkshaya Collage of Engineering and Technology, Coimbatore, Tamilnadu

Year , VenueApril 2022 , Akshaya Collage of Engineering and Technology, Coimbatore, Tamilnadu

Evaluation of Alternate Material of a Bush for Reducing Fretting Wear Damage in a Bush-Pin Joint

Book Chapter

Book NameRecent Advances in Manufacturing Modelling and Optimization

PublisherSpringer, Singapore

Author NameT Sawant, SJ Joshi, DV Patel, DB Shah, VM Bhojawala

Page Number427-437

Chapter TitleEvaluation of Alternate Material of a Bush for Reducing Fretting Wear Damage in a Bush-Pin Joint

Published YearApril 2022

ISSN/ISBN No978-981-16-9951-1

Indexed INScopus

Abstract

A flyer is a textile machinery component used for spinning thread and is mounted on a roving frame. A roving frame normally consists of around two hundred flyers. This paper deals with the investigation of failure of the bush and pin joint in the presser of the flyer. This failure is serious as it results in production downtime of the roving frame and involves considerable replacement cost. It is present practice to use bush made of polyamide (blended with 10% graphite). Alternative bush material considered is polyamide (blended with 15% graphite and 10% Teflon). The dynamic simulation is performed to find the variation of presser force and reaction at bush with bobbin diameter. The loss in wear volume is evaluated by means of finite element analysis (FEA), and semi-analytical approach is adopted for calculating the wear depth. The results are in confirmation with actual wear life with polyamide (blended with 10% graphite). The comparison of wear life reveals that bush made from polyamide (blended with 15% graphite and 10% Teflon) results in approximately double life as compared to that made from polyamide (blended with 10% graphite). Hence, it is recommended to use bush made from polyamide (blended with 15% graphite and 10% Teflon).

Identification of Fault Size of Rolling Element Bearing on Outer Race From Vibration Signature Analysis

Journal

Journal NameJournal of Physics: Conference Series

Title of PaperIdentification of Fault Size of Rolling Element Bearing on Outer Race From Vibration Signature Analysis

PublisherIOP Publishing

Volume Number1921(1)

Page Number012087

Published YearMay 2021

ISSN/ISBN No1742-6588

Indexed INScopus

Size Identification of Inner Race Spall in Rolling Element Bearing Operating Under Combined Load Using Vibration Signature Analysis

Conference

Title of PaperSize Identification of Inner Race Spall in Rolling Element Bearing Operating Under Combined Load Using Vibration Signature Analysis

Proceeding NameInternational conference on condition monitoring 2021

PublisherTATA STEEL and Condition Monitoring Society of India, January 2021

Author NameVipul M Bhojawala,Dhaval V Patel, Kaushik M Patel

OrganizationTATA STEEL and Condition Monitoring Society of India, January 2021

Year , VenueJanuary 2021 , TATA STEEL, Jamshedpur

Fault diagnostics of rolling element bearing with audible sound signature using enveloped IMF based method

Conference

Title of PaperFault diagnostics of rolling element bearing with audible sound signature using enveloped IMF based method

Proceeding NameInternational conference on condition monitoring 2021

PublisherTATA STEEL and Condition Monitoring Society of India, January 2021

Author NameDhaval V Patel, Vipul M Bhojawala, Kaushik M Patel

OrganizationTATA STEEL and Condition Monitoring Society of India, January 2021

Year , VenueJanuary 2021 , TATA STEEL, Jamshedpur

Hertzian Contact Stress Analysis in Roller Power Transmission One-Way Clutch by Using Finite Element Analysis

Book Chapter

Book NameAdvanced Engineering Optimization Through Intelligent Techniques

PublisherSpringer, Singapore

Author NameKaran Dutt, S B Soni, Dhaval Patel

Page Number621-630

Chapter TitleHertzian Contact Stress Analysis in Roller Power Transmission One-Way Clutch by Using Finite Element Analysis

Published YearJuly 2019

ISSN/ISBN No978-981-13-8196-6

Indexed INScopus

Identification of Faulty Condition of Rolling Element Bearing With Inner Race Defect Using Time and Frequency Domain Parameters of Vibration Signature

Book Chapter

Book NameTechnology Drivers: Engine for Growth

PublisherCRC Press

Author NameShrey Trivedi, Dhaval V Patel, Vipul M Bhojawala, Kaushik M Patel

Chapter TitleIdentification of Faulty Condition of Rolling Element Bearing With Inner Race Defect Using Time and Frequency Domain Parameters of Vibration Signature

Published YearApril 2018

ISSN/ISBN No9780203713143

Identification of faulty condition of rolling element bearing with outer race defect using time and frequency domain parameters of vibration signature

Book Chapter

Book NameTechnology Drivers: Engine for Growth

PublisherCRC Press

Author NameShrey Trivedi, Dhaval V Patel, Vipul M Bhojawala, Kaushik M Patel

Page Number215-222

Chapter TitleIdentification of faulty condition of rolling element bearing with outer race defect using time and frequency domain parameters of vibration signature

Published YearApril 2018

ISSN/ISBN No9780203713143

Method of Optimum Spring Energy Selection for Circuit Breaker Operating Mechanisms

Conference

Title of PaperMethod of Optimum Spring Energy Selection for Circuit Breaker Operating Mechanisms

Proceeding Name4th International Conference on Multidisciplinary Research & Practice (4ICMRP-2017)

PublisherResearch and Scientific Innovation Society

OrganizationResearch and Scientific Innovation Society

Year , VenueDecember 2017 , Ahmedabad Management Association(AMA),Ahmedabad

ISSN/ISBN No978-93-5288-448-3

Indexed INOthers

Seismic Evaluation of Oil Filled Transformers

Conference

Title of PaperSeismic Evaluation of Oil Filled Transformers

Proceeding NameInternational conference SIEICON 2017

OrganizationSigma Institute of Engineering, Bakrol

Year , VenueApril 2017 , Sigma Institute of Engineering, Bakrol

ISSN/ISBN No23484470

Indexed INOthers

Design of core clamping arrangement for transformers

Conference

Title of PaperDesign of core clamping arrangement for transformers

Proceeding NameInternational conference SIEICON 2017

OrganizationSigma Institute of Engineering, Bakrol

Year , VenueApril 2017 , Sigma Institute of Engineering, Bakrol

ISSN/ISBN No23484470

Indexed INOthers

Design and Development of Deployable Mechanism for Spacecraft Reflector

Book Chapter

Book NameMulti-disciplinary Sustainable Engineering: Current and Future Trends: Proceedings of the 5th Nirma University International Conference on Engineering

PublisherCRC Press

Author NameValay M Patel, AR Srinivas, Piyush Shukla, Dhaval V Patel

Page Number323

Chapter TitleDesign and Development of Deployable Mechanism for Spacecraft Reflector

Published YearMay 2016

ISSN/ISBN No9780367737108

Verification of Contact Stress in Centrifugal Liftoff Sprag Type One Way Clutch by Using Finite Element Analysis

Conference

Title of PaperVerification of Contact Stress in Centrifugal Liftoff Sprag Type One Way Clutch by Using Finite Element Analysis

Proceeding NameNational conference on Design, Analysis and Optimization in Mechanical Engineering

OrganizationMechanical Engineering Department, M.S. University, Baroda

Year , VenueMarch 2016 , Mechanical Engineering Department, M.S. University, Baroda

Indexed INOthers

Improvised Thermo Structural Stress Relief Techniques for Micro Integrated Circuit Carries

Journal

Journal NameJournal of Mechanical Engineering- A Publication of Space Society of Mechanical Engineers.

Title of PaperImprovised Thermo Structural Stress Relief Techniques for Micro Integrated Circuit Carries

PublisherSpace Society of Mechanical Engineers, Space Application Centre, ISRO, Ahmedabad

Volume Number8

Published YearApril 2010

Indexed INOthers

Hiren Prajapati

Effect of Carrier Fluid Viscosity and Particle Concentration on Stability of Magnetorheological Fluid

Conference

Title of PaperEffect of Carrier Fluid Viscosity and Particle Concentration on Stability of Magnetorheological Fluid

Proceeding NameProceedings of the 10th Interantional and 50th National Conference on Fluid Mechanics and Fluid Power (FMFP)

OrganizationIIT Jodhpur

Published YearJanuary 2023

Numerical simulation of Magnetorheological Force Actuator

Conference

Title of PaperNumerical simulation of Magnetorheological Force Actuator

Proceeding NameInternational Conference on Recent Advances in Fluid Mechanics and Nanoelectronics (ICRAFMN-2023)

OrganizationManipal Institute Technology, Benguluru

Published YearJanuary 2023

Characterization of Magnetorheological Fluid: A Study on Sedimentation and Redispersion

Journal

Journal NameAdvanced Engineering Materials

Title of PaperCharacterization of Magnetorheological Fluid: A Study on Sedimentation and Redispersion

PublisherWiley Publication

Volume Number2101415

Page Number1-13

Published YearFebruary 2022

ISSN/ISBN No 1527-2648

Indexed INScopus, Web of Science

Application of optical techniques in sedimentation study of magnetorheological fluids

Journal

Journal NameInternational Journal of Nanotechnology

Title of PaperApplication of optical techniques in sedimentation study of magnetorheological fluids

PublisherInderscience Publication

Volume Number18

Page Number941-950

Published YearDecember 2021

ISSN/ISBN No1475-7435

Indexed INScopus

Synthesis, characterization and applications of magnetorheological fluid

Book Chapter

Book NameTechnologies for Sustainable Development

PublisherCRC Press

Author NameHiren Prajapati

Page Number306-311

Chapter TitleSynthesis, characterization and applications of magnetorheological fluid

Published YearSeptember 2020

Indexed INScopus

Methods for sedimentation study of magnetorheological fluids

Journal

Journal NameMaterials Today Proceedings

Title of PaperMethods for sedimentation study of magnetorheological fluids

PublisherElservier

Volume Number28

Page Number40-44

Published YearFebruary 2020

Indexed INScopus

Vibration Reduction in Reciprocating Compressor Using Vibration Absorber

Conference

Title of PaperVibration Reduction in Reciprocating Compressor Using Vibration Absorber

Proceeding NameProceedings of ICETME 2017, GCET V V Nagar

OrganizationICETME 2017, GCET V V Nagar

Year , VenueJanuary 2017 , ICETME 2017, GCET V V Nagar

ISSN/ISBN No978-93-84659-77-6

Design of Automatic Fly Ash Brick Manufacturing Machine Components

Conference

Title of PaperDesign of Automatic Fly Ash Brick Manufacturing Machine Components

PublisherELK Asia Pacific Journals

OrganizationDepartment of Mechanical Engineering I.T.S Engineering College Greater Noida,India

Year , VenueJanuary 2017 , Department of Mechanical Engineering I.T.S Engineering College Greater Noida,India

ISSN/ISBN No978-93-85537-06-6

Design and Development of Feeding Mechanism for Automatic Fly-Ash Brick Making Machine

Conference

Title of PaperDesign and Development of Feeding Mechanism for Automatic Fly-Ash Brick Making Machine

PublisherELK Asia Pacific Journals

OrganizationDepartment of Mechanical Engineering I.T.S Engineering College Greater Noida,India

Year , VenueJanuary 2017 , Department of Mechanical Engineering I.T.S Engineering College Greater Noida,India

ISSN/ISBN No978-93-85537-06-6

Free Vibration of Metallic Beam under Various Boundary Conditions using mathematical approach

Conference

Title of PaperFree Vibration of Metallic Beam under Various Boundary Conditions using mathematical approach

OrganizationDepartment of Mechanical Engineering I.T.S Engineering College Greater Noida,India

Year , VenueJanuary 2017 , Department of Mechanical Engineering I.T.S Engineering College Greater Noida,India

ISSN/ISBN No978-93-85537-06-6

Design and analysis of Base frame of Poucher Machine

Conference

Title of PaperDesign and analysis of Base frame of Poucher Machine

Proceeding NameNational Conference on Design, Analysis and Optimization in Mechanical Engineering

OrganizationM S University Baroda

Year , VenueJanuary 2015 , M S University Baroda

ISSN/ISBN No9789352588312

Experimental Investigation on Effect of Machining Parameters on Surface Roughness in Thermally Assisted Turning of mild steel

Conference

Title of PaperExperimental Investigation on Effect of Machining Parameters on Surface Roughness in Thermally Assisted Turning of mild steel

Proceeding NameInternational Conference on Multidisciplinary Research & Practice

PublisherResearch and scientific innovation society, AMA, Ahmedabad

OrganizationResearch and scientific innovation society, AMA, Ahmedabad

Year , VenueJanuary 2014 , Atira, Ahmedabad

ISSN/ISBN No2321-2705

Investigation and Solution of Repetitive Failure of Connecting Rod

Conference

Title of PaperInvestigation and Solution of Repetitive Failure of Connecting Rod

Proceeding NameInternational Conference on Multidisciplinary Research & Practice

PublisherResearch and scientific innovation society, AMA, Ahmedabad

OrganizationResearch and scientific innovation society, AMA, Ahmedabad

Year , VenueJanuary 2014 , Atira, Ahmedabad

Influence of Inline Support Location on Dynamic Characterization of Moderate Thick Plate

Conference

Title of PaperInfluence of Inline Support Location on Dynamic Characterization of Moderate Thick Plate

Proceeding NameNirma University international conference on engineering

OrganizationNirma University

Published YearJanuary 2013

Design and dynamic characterization of reciprocating compressor piston.

Conference

Title of PaperDesign and dynamic characterization of reciprocating compressor piston.

Proceeding NameICARME-12/02/2012

Year , VenueJanuary 2012 , Ahmedabad

Modal analysis of reciprocating compressor components to identify cause of vibration

Conference

Title of PaperModal analysis of reciprocating compressor components to identify cause of vibration

Proceeding NameICMOC-2012

OrganizationICMOC-2012,

Year , VenueJanuary 2012 , Nural Islam University, Tamilnadu

Simple modal analysis of reciprocating compressor piston and validation through experiment

Conference

Title of PaperSimple modal analysis of reciprocating compressor piston and validation through experiment

Proceeding NameNirma University international conference on engineering ICIKR-ETS-2012

OrganizationNirma University international conference on engineering ICIKR-ETS-2012

Year , VenueJanuary 2012 , G H Bharad Engineering college, Rajkot

A condition monitoring and analysis of reciprocating air compressor based of vibration

Conference

Title of PaperA condition monitoring and analysis of reciprocating air compressor based of vibration

Proceeding NameICMOC-2012

OrganizationICMOC-2012

Year , VenueJanuary 21012 , Nural Islam University, Tamilnadu

Jatinkumar Dave

Discontinuous Gait for Statically Stable Stair Climbing and Descending of Quadruped Robot with Horizontal Body Posture

Journal

Journal NameAustralian Journal of Mechanical Engineering

Title of PaperDiscontinuous Gait for Statically Stable Stair Climbing and Descending of Quadruped Robot with Horizontal Body Posture

PublisherTaylor and Francis

Volume Number22:1

Page Number79-94

Published YearJanuary 2024

ISSN/ISBN No2204-2253

Indexed INScopus, Web of Science, EBSCO

Abstract

For improving the functionality, a quadruped robot must have the capabilities to manoeuvre over different terrain conditions like slope & stair climbing, obstacle avoidance, uneven & rough terrain, etc. In all such conditions, the primary requirement for a robot is to be stable while walking. In the present work, an attempt is made to develop a gait scheme of quadruped robots for statically stable straightforward stair climbing and descending, with horizontal posture. The use of a discontinuous type of gait in the proposed scheme makes it more stable and easier to implement. The proposed scheme has been simulated and its stability is validated

A Comprehensive Review on Deploying Robotics Application in Telecom Network Tower’s Field Maintenance: Challenges with Current Practices and Feasibility Analysis for Robotics Implementation

Journal

Journal NameJournal of Field Robotics

Title of PaperA Comprehensive Review on Deploying Robotics Application in Telecom Network Tower’s Field Maintenance: Challenges with Current Practices and Feasibility Analysis for Robotics Implementation

PublisherWiley

Volume Number40:7

Page Number1860–1883

Published YearOctober 2023

ISSN/ISBN No1556-4967

Indexed INScopus, Web of Science

Kinematic analysis of swarm robots for solar panel installation

Conference

Title of PaperKinematic analysis of swarm robots for solar panel installation

Proceeding Name3rd International Conference on Robotics, Intelligent Automation and Control Technologies

PublisherAIP Conference Proceedings

Author NameJatin Dave; Darshita Shah; Amisha Patel; Raima Sen

OrganizationVellore Institute of Technology, Chennai

Published YearSeptember 2022

Indexed INScopus

Design of climbing robot for inspection of telecom tower

Conference

Title of PaperDesign of climbing robot for inspection of telecom tower

Proceeding NameInternational Conference on Robotics, Intelligent Automation and Control Technologies

PublisherAIP Conference Proceedings

Author NameDarshita Shah; Jatin Dave; Amisha Patel; Parth Jadav

OrganizationVellore Institute of Technology, Chennai

Published YearSeptember 2022

Indexed INScopus

Development of Prototype of a Floor Cleaning Robot

Conference

Title of PaperDevelopment of Prototype of a Floor Cleaning Robot

Proceeding Name3rd International Conference on Robotics, Intelligent Automation and Control Technologies

PublisherAIP Conference Proceedings

Author NameMaharsh Sanghvi, Karan Sharma, Darshita Shah, Jatin Dave, Dhaval Shah

OrganizationVellore Institute of Technology, Chennai

Published YearSeptember 2022

Indexed INScopus

Design and Development of Mobile Stair Climbing Robot

Conference

Title of PaperDesign and Development of Mobile Stair Climbing Robot

Proceeding Name3rd International Conference on Robotics Automation and Non-Destructive Evaluation, Chennai, India, 23 April 2022.

Conference

Title of PaperComparing the Performance of One-Phase, Two-Phase, and Four-Phase Discontinuous Static Gait for a Quadruped Robot

Proceeding Name5th International Conference of the Robotics Society on Advances in Robotics, AIR 2021

PublisherACM International Conference Proceeding Series

Author NameAshish Majithiya, Jatin Dave

OrganizationIIT Kanpur

Year , VenueJune 2021 , IIT Kanpur

Page Number1

ISSN/ISBN No978-145038971-6

Indexed INScopus

Trajectory Planning for the five Degree of Freedom Feeding Robot using Septic and Nonic Functions

Journal

Journal NameInternational Journal of Mechanical Engineering and Robotics Research

Title of PaperTrajectory Planning for the five Degree of Freedom Feeding Robot using Septic and Nonic Functions

PublisherInternational Journal of Mechanical Engineering and Robotics Research

Volume Number9 (7)

Page Number1043-1055

Published YearJuly 2020

ISSN/ISBN No2278-0149

Indexed INScopus, Web of Science

Effects of Cut-Out Orientation and Fiber Angle on Stress Concentration in an Infinite Orthotropic Plate

Journal

Journal NameInternational Journal for Computational Methods in Engineering Science and Mechanics

Title of PaperEffects of Cut-Out Orientation and Fiber Angle on Stress Concentration in an Infinite Orthotropic Plate

PublisherTaylor and Francis

Volume Number19 (6)

Page Number433-439

Published YearDecember 2018

ISSN/ISBN No1550-2287

Indexed INScopus

Kinematic Modelling of Walking Mechanism

Conference

Title of PaperKinematic Modelling of Walking Mechanism

Proceeding Name5th Asian Mehanism and Machine Science Conference

OrganizationIndian Institute of Science, Bengaluru

Year , VenueDecember 2018 , Indian Institute of Science, Bengaluru

Stress field around rectangular hole in functionally graded plate

Journal

Journal NameInternational Journal of Mechanical Science

Title of PaperStress field around rectangular hole in functionally graded plate

PublisherElsevier

Volume Number136

Page Number350-370

Published YearFebruary 2018

ISSN/ISBN No0020-7403

Indexed INScopus, UGC List

Abstract

In this paper, functionally graded plate having rectangular cut-out/hole at the center is considered. The plate thickness is discretized into large number of thin orthotropic lamina such that continuous variation/gradation of moduli of elasticity and Poisson’s ratio along the thickness can be obtained. The power law is used to have linear, quadratic and cubic gradation of these material properties

Stress analysis of unsymmetric composite plate with variance of oval shaped cutout

Journal

Journal NameMathematics and Mechanics of Solids

Title of PaperStress analysis of unsymmetric composite plate with variance of oval shaped cutout

PublisherSAGE

Volume Number22(4)

Page Number692-707

Published YearApril 2017

ISSN/ISBN No1081-2865

Indexed INUGC List, Others

Abstract

The complex variable method is used to obtain a solution for stress distribution around cutout of oval shape (and its variance) in an infinite plate having un-symmetric material properties with respect to mid plane. The mapping function used is for an oval shape but, using a different shape and size, a constant oval shape of different size as well as shapes such as a circle, ellipse, square, recta

Finite Element Analysis and Optimization of Stationary Platen for Upgradation of Plastic Injection Moulding Machine from 1300T to 1500T

Conference

Title of PaperFinite Element Analysis and Optimization of Stationary Platen for Upgradation of Plastic Injection Moulding Machine from 1300T to 1500T

Proceeding NameInternational Conference on Emerging Trends in Mechanical Engineering

OrganizationG. H. Patel College of Engineering & Technology

Year , VenueFebruary 2017 , G. H. Patel College of Engineering & Technology

Stress intensity factor for hypocycloidal hole in finite plate

Journal

Journal NameTheoretical and Applied Fracture Mechanics

Title of PaperStress intensity factor for hypocycloidal hole in finite plate

PublisherElsevier

Volume Number82

Page Number59-68

Published YearApril 2016

ISSN/ISBN No0167-8442

Indexed INScopus, UGC List

Abstract

In this paper, the general solution for the stress intensity factor at cusp points of hypocycloidal hole in anisotropic finite plate subjected to in-plane loading is presented. The stress intensity factors at cusp points of hypocycloidal hole is derived using complex variable approach. The stress functions are represented in terms of infinite power series of complex numbers and the constants of th

Conceptual design of single degree of freedom mechanism for walking robot

Conference

Title of PaperConceptual design of single degree of freedom mechanism for walking robot

Proceeding NameNational Conference on Design, analysis and optimization in Mechanical Engg (DAOME 2016)

OrganizationThe M. S. University of Baroda, Vadodara

Year , VenueMarch 2016 , The M. S. University of Baroda, Vadodara

Page Number159 – 171

Stresses around oval shaped hole in infinite symmetric composite plate subjected to internal pressure

Conference

Title of PaperStresses around oval shaped hole in infinite symmetric composite plate subjected to internal pressure

Proceeding NameNational Conference on Design, analysis and optimization in Mechanical Engg (DAOME 2016)

OrganizationThe M. S. University of Baroda, Vadodara

Year , VenueMarch 2016 , The M. S. University of Baroda, Vadodara

Page Number105 – 109

Design modification of stationary platen in plastic Injection molding machine

Conference

Title of PaperDesign modification of stationary platen in plastic Injection molding machine

Proceeding NameNational Conference on Design, analysis and optimization in Mechanical Engg (DAOME 2016)

OrganizationThe M. S. University of Baroda, Vadodara

Year , VenueMarch 2016 , The M. S. University of Baroda, Vadodara

Page Number80 – 85

Finite element analysis and design modification of stationary platen for 225 ton Injection molding machine

Conference

Title of PaperFinite element analysis and design modification of stationary platen for 225 ton Injection molding machine

Proceeding NameNational Conference on Design, analysis and optimization in Mechanical Engg (DAOME 2016)

OrganizationThe M. S. University of Baroda, Vadodara

Year , VenueMarch 2016 , The M. S. University of Baroda, Vadodara

Page Number8 – 13

Stresses and moments in through-thickness functionally graded plate weakened by circular/elliptical cut-out

Journal

Journal NameInternational Journal of Mechanical Science

Title of PaperStresses and moments in through-thickness functionally graded plate weakened by circular/elliptical cut-out

PublisherElsevier

Volume Number105

Page Number146 - 157

Published YearJanuary 2016

ISSN/ISBN No0020-7403

Indexed INScopus, UGC List

Abstract

In this paper,solution of stress resultant and moments around circular and elliptical hole in functionally graded (FG)infinite plate with through thickness material property variation is presented. The through thickness variation of material properties is obtained according to power law and stress functions are computed using complex variable method. Effect of gradation of material property,

Stresses around elliptical/oval shaped hole in finite laminated plate

Conference

Title of PaperStresses around elliptical/oval shaped hole in finite laminated plate

Proceeding Name7th ISME conference

OrganizationIIT Delhi

Year , VenueOctober 2015 , IIT Delhi

Analysis of Carbon-Fiber Composite Sterngthening Technique for Reinforced Beam

Conference

Title of PaperAnalysis of Carbon-Fiber Composite Sterngthening Technique for Reinforced Beam

Proceeding Name6th International Conference on Progress In Production, Mechanical And Automobile Engineering (ICPMAE 2015)

Published YearMarch 2015

Stress intensity factors for hypocycloidal hole with cusps in infinite anisotropic plate

Journal

Journal NameTheoretical and Applied Fracture Mechanics

Title of PaperStress intensity factors for hypocycloidal hole with cusps in infinite anisotropic plate

PublisherElsevier

Volume Number75

Page Number44-52

Conference

Title of PaperSimulation of Trajectories and Comparison of Joint Variables for Robotic Manipulator using Multibody Dynamics (MBD)

Proceeding NameHyperworks Technology Conference 2011 (HTC11)

OrganizationAltair Engineering Ltd. Pune

Year , VenueAugust 2011 , Altair Engineering Ltd. Pune

Page Number80-86

Comparative Study of Joint Variable for RRR and RPP Configuration for Given Trajectory

Title of PaperEXPERIMENTAL INVESTIGATIONS AND EFFECT OF PARAMETERS ON FRICTION WELDED AISI 304 AND INVAR ALLOYS

Published YearJuly 2023

ISSN/ISBN No2374-0698

Indexed INScopus

STATUS OF LEAN SIX SIGMA IMPLEMENTATION IN INDIAN INDUSTRIES: A CROSS-SECTIONAL NATIONAL SURVEY

Journal

Journal NameINTERNATIONAL JOURNAL OF LEAN SIX SIGMA

Title of PaperSTATUS OF LEAN SIX SIGMA IMPLEMENTATION IN INDIAN INDUSTRIES: A CROSS-SECTIONAL NATIONAL SURVEY

Volume Number14

Page Number791-814

Published YearJune 2023

ISSN/ISBN No2040-4166

Journal

Journal NameINTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING

Title of PaperFINITE ELEMENT SIMULATION OF ADDITIVE MANUFACTURING PROCESS OF CARBON ALLOTROPES

Volume Number98

Published YearMarch 2023

ISSN/ISBN No1955-2505

Indexed INScopus, Web of Science

MACHINE VISION-BASED GRADIENT-BOOSTED TREE AND SUPPORT VECTOR REGRESSION FOR TOOL LIFE PREDICTION IN TURNING

Journal

Journal NameINTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Title of PaperMACHINE VISION-BASED GRADIENT-BOOSTED TREE AND SUPPORT VECTOR REGRESSION FOR TOOL LIFE PREDICTION IN TURNING

Volume Number126

Page Number471 to 485

Published YearFebruary 2023

ISSN/ISBN No1433-3015

Indexed INScopus, Web of Science

A STUDY ON THE INFLUENCE OF REINFORCEMENT VOLUME ON AA5083/(SIC-GR) HYBRID SURFACE COMPOSITE DEVELOPED BY FRICTION STIR PROCESSING

Journal

Journal NameARCHIVES OF METALLURGY AND MATERIALS

Title of PaperA STUDY ON THE INFLUENCE OF REINFORCEMENT VOLUME ON AA5083/(SIC-GR) HYBRID SURFACE COMPOSITE DEVELOPED BY FRICTION STIR PROCESSING

Volume Number68

Page Number625-629

Published YearJanuary 2023

ISSN/ISBN No17333490

Indexed INScopus, Indian citation Index

Journal

Journal NamePHYSICS OF METALS AND METALLOGRAPHY

Title of PaperEFFECT OF MONO AND HYBRID REINFORCEMENT ON MICROHARDNESS AND WEAR BEHAVIOR OF ALâ€“MN ALLOY BASED SURFACE COMPOSITES PRODUCED BY FRICTION STIR PROCESSING

Volume Number123

Page Number1387 - 1394

Published YearDecember 2022

ISSN/ISBN No0031918X

INVESTIGATIONS ON THE INFLUENCE OF PRINTING PARAMETERS DURING PROCESSING OF BIOCOMPATIBLE POLYMER IN FUSED DEPOSITION MODELLING (FDM)

Journal

Journal NameADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES

Title of PaperINVESTIGATIONS ON THE INFLUENCE OF PRINTING PARAMETERS DURING PROCESSING OF BIOCOMPATIBLE POLYMER IN FUSED DEPOSITION MODELLING (FDM)

Volume Number8

Page Number320-336

Published YearNovember 2022

ISSN/ISBN No2374-0698

Indexed INScopus

IMPROVEMENT IN MACHINING PROCESS PERFORMANCE USING SOLID LUBRICANT ASSISTED MINIMUM QUANTITY LUBRICATION

Journal

Journal NameADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES

Title of PaperIMPROVEMENT IN MACHINING PROCESS PERFORMANCE USING SOLID LUBRICANT ASSISTED MINIMUM QUANTITY LUBRICATION

Volume Number8

Page Number2102-2127

Published YearNovember 2022

ISSN/ISBN No2374-0698

Indexed INScopus

EVALUATION OF SURFACE ROUGHNESS, TOOL WEAR AND CHIP MORPHOLOGY DURING MACHINING OF NICKEL-BASED ALLOY UNDER SUSTAINABLE HYBRID NANOFLUID-MQL STRATEGY

Journal

Journal NameLUBRICANTS

Title of PaperEVALUATION OF SURFACE ROUGHNESS, TOOL WEAR AND CHIP MORPHOLOGY DURING MACHINING OF NICKEL-BASED ALLOY UNDER SUSTAINABLE HYBRID NANOFLUID-MQL STRATEGY

Volume Number10

Page Number315

Published YearNovember 2022

ISSN/ISBN No2075-4442

Indexed INScopus, Web of Science

EXPERIMENTAL INVESTIGATIONS OF PROCESS PARAMETERS ON MECHANICAL PROPERTIES FOR PLA DURING PROCESSING IN FDM

Journal

Journal NameADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES

Title of PaperEXPERIMENTAL INVESTIGATIONS OF PROCESS PARAMETERS ON MECHANICAL PROPERTIES FOR PLA DURING PROCESSING IN FDM

Volume Number8

Page Number696-709

Published YearOctober 2022

ISSN/ISBN No2374-0698

Journal

Journal NameJOURNAL OF REMANUFACTURING

Title of PaperMULTI-ECHELON CLOSED-LOOP SUPPLY CHAIN PRODUCTION-INVENTORY MODEL WITH FINITE MANUFACTURING AND REMANUFACTURING RATES

Volume Number12

Page Number303-337

Published YearJuly 2022

ISSN/ISBN No2210-4690

OPTIMIZATION OF MQL PARAMETERS AND EXPERIMENTAL INVESTIGATIONS USING VEGETABLE OIL-BASED CUTTING FLUID DURING MACHINING OF AISI 4140

Journal

Journal NameINTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING

Title of PaperOPTIMIZATION OF MQL PARAMETERS AND EXPERIMENTAL INVESTIGATIONS USING VEGETABLE OIL-BASED CUTTING FLUID DURING MACHINING OF AISI 4140

Volume Number17

Page Number2831 to 2846

Published YearMay 2022

ISSN/ISBN No1955-2505

Journal

Journal NameADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES

Title of PaperEXPERIMENTAL INVESTIGATION OF TOOL WEAR IN MACHINING OF SIC BASED AL-MMC

Volume Number1

Published YearJuly 2021

ISSN/ISBN No2374-0698

Indexed INScopus

A NOVEL APPROACH OF COMBINED EDGE DETECTION AND SEGMENTATION FOR TOOL WEAR MEASUREMENT IN MACHINING

Journal

Journal NamePRODUCTION ENGINEERING

Title of PaperA NOVEL APPROACH OF COMBINED EDGE DETECTION AND SEGMENTATION FOR TOOL WEAR MEASUREMENT IN MACHINING

Volume Number15

Page Number519 to 533

Published YearMay 2021

ISSN/ISBN No1863-7353

Indexed INScopus

EXPERIMENTAL INVESTIGATIONS ON EFFECT OF SURFACE TREATMENT OF ALUMINUM BASED METAL MATRIX COMPOSITES USING LASER

Journal

Journal NameJOURNAL OF PHYSICS: CONFERENCE SERIES

Title of PaperEXPERIMENTAL INVESTIGATIONS ON EFFECT OF SURFACE TREATMENT OF ALUMINUM BASED METAL MATRIX COMPOSITES USING LASER

Volume Number1921

Page Number1-10

Published YearMarch 2021

ISSN/ISBN No17426588

Indexed INScopus

PRIORITIZATION OF LEAN SIX SIGMA SUCCESS FACTORS USING PARETO ANALYSIS

Journal

Journal NameIOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING

Title of PaperPRIORITIZATION OF LEAN SIX SIGMA SUCCESS FACTORS USING PARETO ANALYSIS

Volume Number1070

Page Number1-7

Published YearFebruary 2021

ISSN/ISBN No1757-899X

Journal

Journal NameINTERNATIONAL JOURNAL OF MECHATRONICS AND MANUFACTURING SYSTEMS

Title of PaperULTRASONIC VIBRATION-ASSISTED SINGLE POINT INCREMENTAL FORMING OF HEMISPHERICAL SHAPE USING MULTI-STAGE FORMING STRATEGY

Volume Number13

Page Number247-265

Published YearNovember 2020

ISSN/ISBN No1753107

PERFORMANCE OF PVD AND CVD COATED CUTTING TOOL INSERTS IN MACHINING UNDER MQL-MQSL ENVIRONMENT

Journal

Journal NameINTERNATIONAL JOURNAL OF MECHATRONICS AND MANUFACTURING SYSTEMS

Title of PaperPERFORMANCE OF PVD AND CVD COATED CUTTING TOOL INSERTS IN MACHINING UNDER MQL-MQSL ENVIRONMENT

Volume Number13

Page Number210-229

Published YearOctober 2020

ISSN/ISBN No1753-1047

Indexed INScopus

MICRO-HARDNESS AND WEAR BEHAVIOR OF AA2014/AL2O3 SURFACE COMPOSITE PRODUCED BY FRICTION STIR PROCESSING.

Journal

Journal NameS N APPLIED SCIENCE

Title of PaperMICRO-HARDNESS AND WEAR BEHAVIOR OF AA2014/AL2O3 SURFACE COMPOSITE PRODUCED BY FRICTION STIR PROCESSING.

Volume Number2

Page Number1760-1775

Published YearOctober 2020

ISSN/ISBN No2523-3971

Indexed INScopus

AUTOMATIC GENERATION OF TOOL PATH FROM POINT CLOUD INPUT FOR SCULPTURE SURFACE MACHINING

Journal

Journal NameINTERNATIONAL JOURNAL OF ADVANCED SCIENCE AND TECHNOLOGY

Title of PaperAUTOMATIC GENERATION OF TOOL PATH FROM POINT CLOUD INPUT FOR SCULPTURE SURFACE MACHINING

Volume Number29

Page Number12384 to 12395

Published YearSeptember 2020

ISSN/ISBN No2005-4238

Indexed INScopus

A REVIEW ON MANUFACTURING THE SURFACE COMPOSITES BY FRICTION STIR PROCESSING

Journal

Journal NameMATERIALS AND MANUFACTURING PROCESSES

Title of PaperA REVIEW ON MANUFACTURING THE SURFACE COMPOSITES BY FRICTION STIR PROCESSING

Volume Number36

Page Number135-170

Published YearSeptember 2020

ISSN/ISBN No1042-6914

Indexed INScopus, Web of Science

INVESTIGATIONS ON MACHINABILITY ASPECTS OF AISI 52100 WITH MINIMUM QUANTITY SOLID LUBRICATION

Journal

Journal NamePROCEDIA MANUFACTURING

Title of PaperINVESTIGATIONS ON MACHINABILITY ASPECTS OF AISI 52100 WITH MINIMUM QUANTITY SOLID LUBRICATION

Volume Number48

Page Number11-17

Published YearAugust 2020

ISSN/ISBN No2351-9789

Indexed INScopus

Experimental Study of Thickness Gradient and Flow Simulation in VARTM Process

Journal

Journal NameFibers and Polymers

Title of PaperExperimental Study of Thickness Gradient and Flow Simulation in VARTM Process

PublisherSpringer Publication

Volume Number21

Page Number384–391

Published YearFebruary 2020

ISSN/ISBN No1229-9197

Indexed INScopus, Web of Science

A review on manufacturing the surface composites by friction stir processing

Journal

Journal NameMaterials And Manufacturing Processes

Title of PaperA review on manufacturing the surface composites by friction stir processing

Volume Number36

Page Number135-170

Published YearJanuary 2020

Experimental and simulation investigation on spring-in deformation for L-shape component

Journal

Journal NameCurved and Layered Structures

Title of PaperExperimental and simulation investigation on spring-in deformation for L-shape component

PublisherDe Gruyter Publisher

Volume Number6

Page Number169-180

Published YearSeptember 2019

ISSN/ISBN No2353-7396

Indexed INScopus, Web of Science

Passive Vane-type Vortex Generators for Aircraft Performance Enhancement: A Review

Conference

Title of PaperPassive Vane-type Vortex Generators for Aircraft Performance Enhancement: A Review

Proceeding Name10th Interantional and 50th National Conference on Fluid Mechanics and Fluid Power (FMFP)

Author NameA Madhusudan Achari

OrganizationIIT Jodhpur

Published YearDecember 2023

Performance Enhancement of NACA 0015 Wing using Rotating Cylinder Vortex Generator

Conference

Title of PaperPerformance Enhancement of NACA 0015 Wing using Rotating Cylinder Vortex Generator

Proceeding Name10th Interantional and 50th National Conference on Fluid Mechanics and Fluid Power (FMFP)

Author NameA Madhusudan Achari

OrganizationIIT Jodhpur

Year , VenueDecember 2023 , IIT Jodhpur

Heat Energy Storage in LiBr and Phase Change Material using Solar Parabolic Dish Collector

Conference

Title of PaperHeat Energy Storage in LiBr and Phase Change Material using Solar Parabolic Dish Collector

Proceeding NameInternational Conference on Recent Advances in Science, Engineering and Technology

Author NameA Madhusudan Achari

Published YearMay 2023

Parametric Study on Ammonia based Loop Heat Pipe

Journal

Journal NameHeat Transfer Engineering

Title of PaperParametric Study on Ammonia based Loop Heat Pipe

Published YearJuly 2022

Indexed INScopus

Design and Analysis of Smoke Flow Visualization Apparatus for Wind Tunnel

Conference

Title of PaperDesign and Analysis of Smoke Flow Visualization Apparatus for Wind Tunnel

Proceeding NameIOP Conf. Series: Materials Science and Engineering

Author NameD Raval, S V Jain, A M Achari, K Ghosh

OrganizationICRAMEN 2021

Year , VenueOctober 2021 , Pune, India

Numerical Simulation of Natural Convection in a Finned Cylinder

Conference

Title of PaperNumerical Simulation of Natural Convection in a Finned Cylinder

Proceeding NameThrid International Conference on Computing in Mechanical Engineering

Author NameSatyajeet S Suryawanshi, Sopan H Dehade, Sanjay V Jain, A Madhusudan Achari

OrganizationDepartment of Mechanical Engineering, SCMS, Cochin

Year , VenueSeptember 2021 , Cochin

Journal

Journal NameHeat and Mass Transfer

Title of PaperConjugate heat transfer analysis of a turbulent slot jet impinging on a moving plate

PublisherSpringer

Volume Number53

Page Number1017-1035

Published YearJuly 2016

ISSN/ISBN No0947-7411

Conjugate heat transfer study of turbulent slot impinging jet

Journal

Journal NameTransaction of ASME: Journal of Thermal Sciences and Engineering Application

Title of PaperConjugate heat transfer study of turbulent slot impinging jet

PublisherAmerican Society of Mechanical Engineering

Volume Number7

Page Number041011(1-17)

Published YearJuly 2015

ISSN/ISBN No1948-5085

Indexed INScopus, PubMed

Application of various RANS based models to-wards predicting turbulent slot jet impingement

Journal

Journal NameInternational Journal of Thermal Sciences

Title of PaperApplication of various RANS based models to-wards predicting turbulent slot jet impingement

Journal

Journal NameFacta Universitatis, Series: Mechanical Engineering

Title of PaperInvestigations on the influence of laser surface treatment on hardness and wear behaviour of AL-MMC prepared through powder metallurgy route

Published YearMarch 2024

ISSN/ISBN No2335-0164

Indexed INScopus, Web of Science

Investigations on the effect of hybrid cooling/lubrication strategies on machining characteristics of SS316L

Conference

Title of PaperInvestigations on the effect of hybrid cooling/lubrication strategies on machining characteristics of SS316L

Proceeding Name9th International & 30th All India Manufacturing Technology, Design and Research Conference

OrganizationIndian Institute of Technology, (IIT-BHU), Varanasi

Year , VenueDecember 2023 , Indian Institute of Technology, (IIT-BHU), Varanasi

Journal

Journal NameMaterials Today Communications

Title of PaperBimetallic oxide Mg-Cu nanoparticles synthesis and application in photometric sensing of trypsin in the presence of tap water, ammonia, and glutamine

PublisherElsevier

Volume Number37

Published YearSeptember 2023

ISSN/ISBN No2352-4928

Indexed INScopus, Web of Science

Effects of Machining Parameters of C45 Steel Applying Vegetable Lubricant with Minimum Quantity Cooling Lubrication (MQCL)

Journal

Journal NameLubricants

Title of PaperEffects of Machining Parameters of C45 Steel Applying Vegetable Lubricant with Minimum Quantity Cooling Lubrication (MQCL)

Volume Number11

Published YearAugust 2023

ISSN/ISBN No2075-4442

Indexed INScopus, Web of Science

Experimental investigations and effect of parameters on friction welded AISI 304 and Invar alloys

Journal

Journal NameAdvances in Materials and Processing Technologies

Title of PaperExperimental investigations and effect of parameters on friction welded AISI 304 and Invar alloys

PublisherTaylor & Francis

Published YearJuly 2023

ISSN/ISBN No2374-0698

Indexed INScopus, Web of Science

Investigation on the effect of process parameters and optimization using GRA under biodegradable oil based MQL in machining

Journal

Journal NameInternational Journal on Interactive Design and Manufacturing

Title of PaperInvestigation on the effect of process parameters and optimization using GRA under biodegradable oil based MQL in machining

PublisherSpringer

Published YearJuly 2023

ISSN/ISBN No1955-2505

Indexed INScopus, Web of Science

Experimental investigations on eco-friendly lubrication techniques for improving machining performance

Book Chapter

Book NameAdvances in Industrial and Production Engineering

PublisherSpringer

Page Number331-338

Chapter TitleExperimental investigations on eco-friendly lubrication techniques for improving machining performance

Published YearJuly 2023

Indexed INScopus

Neural network based classifier for tool wear monitoring and prediction during machining

Book Chapter

Book NameAdvances in Industrial and Production Engineering

PublisherSpringer

Page Number319-329

Chapter TitleNeural network based classifier for tool wear monitoring and prediction during machining

Published YearJuly 2023

Indexed INScopus

Machinability investigation of Ti-6Al-4V titanium alloy under dry, flood, MQL and nanofluid-MQL techniques using textured tools

Journal

Journal NameAdvances in Materials and Processing Technologies

Title of PaperMachinability investigation of Ti-6Al-4V titanium alloy under dry, flood, MQL and nanofluid-MQL techniques using textured tools

PublisherTaylor & Francis

Published YearApril 2023

ISSN/ISBN No2374-0698

Indexed INScopus, Web of Science

Machine vision-based gradient-boosted tree and support vector regression for tool life prediction in turning

Journal

Journal NameInternational Journal of Advanced Manufacturing Technology

Title of PaperMachine vision-based gradient-boosted tree and support vector regression for tool life prediction in turning

PublisherSpringer

Published YearFebruary 2023

ISSN/ISBN No1433-3015

Indexed INScopus, Web of Science

Influence of MoS2 and graphite-reinforced nanofluid-MQL on surface roughness, tool wear, cutting temperature and microhardness in machining of Inconel 625

Journal

Journal NameCIRP Journal of Manufacturing Science and Technology

Title of PaperInfluence of MoS2 and graphite-reinforced nanofluid-MQL on surface roughness, tool wear, cutting temperature and microhardness in machining of Inconel 625

PublisherElsevier

Published YearJanuary 2023

ISSN/ISBN No1878-0016

Indexed INScopus, Web of Science

Processing of biomaterials by additive Manufacturing

Book Chapter

Book NameAdvances in Additive Manufacturing: Artificial Intelligence, Nature-Inspired, and Biomanufacturing

PublisherElsevier

Chapter TitleProcessing of biomaterials by additive Manufacturing

Published YearDecember 2022

ISSN/ISBN No978-0-323-91834-3

Journal

Journal NameInternational Journal on Interactive Design and Manufacturing

Title of PaperExperimental investigation of different NN approaches for tool wear prediction based on vision system in turning of AISI 1045 steel

PublisherSpringer

Published YearOctober 2022

Indexed INScopus

Experimental Investigations on eco-friendly lubrication techniques for improving machining Performance

Conference

Title of PaperExperimental Investigations on eco-friendly lubrication techniques for improving machining Performance

Proceeding Name3rd Biennial International Conference on Future Learning Aspects of Mechanical Engineering

Year , VenueAugust 2022 , Amity School of Engineering and Technology, Amity University, Noida

Indexed INScopus

Neural Network Based Classifier for Tool Wear Monitoring and Prediction during Machining

Conference

Title of PaperNeural Network Based Classifier for Tool Wear Monitoring and Prediction during Machining

Proceeding Name3rd Biennial International Conference on Future Learning Aspects of Mechanical Engineering

Year , VenueAugust 2022 , Amity School of Engineering and Technology, Amity University, Noida

Indexed INScopus

Optimization of MQL parameters and experimental investigations using vegetable oil-based cutting fluid during machining of AISI 4140

Journal

Journal NameInternational Journal on Interactive Design and Manufacturing

Title of PaperOptimization of MQL parameters and experimental investigations using vegetable oil-based cutting fluid during machining of AISI 4140

PublisherSpringer

Published YearJune 2022

Indexed INScopus

Effect of mixing method and particle size on hardness and compressive strength of Aluminium based metal matrix composite prepared through powder metallurgy route

Journal

Journal NameJournal of Materials Research and Technology

Title of PaperEffect of mixing method and particle size on hardness and compressive strength of Aluminium based metal matrix composite prepared through powder metallurgy route

PublisherElsevier

Volume Number18

Page Number282-292

Published YearJune 2022

Indexed INScopus, Web of Science

Multi-echelon closed-loop supply chain production-inventory model with finite manufacturing and remanufacturing rates

Journal

Journal NameJournal of Remanufacturing

Title of PaperMulti-echelon closed-loop supply chain production-inventory model with finite manufacturing and remanufacturing rates

PublisherSpringer

Published YearMay 2022

Indexed INScopus

Analysis of vegetable oil-based nano- lubricant technique for improving machinability of Inconel 690

Journal

Journal NameJournal of Manufacturing Processes

Title of PaperAnalysis of vegetable oil-based nano- lubricant technique for improving machinability of Inconel 690

PublisherElsevier

Volume Number77

Page Number708-721

Published YearMay 2022

Indexed INScopus, Web of Science

Indirect tool wear measurement and prediction using multi-sensor data fusion and neural network during machining

Conference

Title of PaperIndirect tool wear measurement and prediction using multi-sensor data fusion and neural network during machining

Proceeding NameInternational Conference on Materials, Machines & Information Technology

Year , VenueJanuary 2022 , Amity School of Engineering & Technology, Amity University, Jharkhand

Indexed INScopus

Machinability investigation of AISI 4340 steel with biodegradable oil-based MQL system

Conference

Title of PaperMachinability investigation of AISI 4340 steel with biodegradable oil-based MQL system

Proceeding NameThird International Conference on Recent Advances in Materials and Manufacturing

OrganizationD.Y. Patil College of Engineering and Technology

Year , VenueNovember 2021 , D.Y. Patil College of Engineering and Technology, Kolhapur, Maharashtra

Indexed INScopus

Machinability improvement and sustainability assessment during machining of AISI 4140 using vegetable oil-based MQL

Journal

Journal NameJournal of the Brazilian Society of Mechanical Sciences and Engineering

Title of PaperMachinability improvement and sustainability assessment during machining of AISI 4140 using vegetable oil-based MQL

PublisherSpringer

Published YearNovember 2021

ISSN/ISBN No1806-3691

Conference

Title of PaperTool wear detection using computer vision system in machining

Proceeding Name6th International Conference on Advanced Production and Industrial Engineering

PublisherSpringer

Author NameP.J. Bagga, M.A. Makhesana, A.B. Mishra, A.R. Marvaniya, K.M. Patel

OrganizationDelhi Technological University, Delhi

Year , VenueJune 2021 , Delhi Technological University, Delhi

Indexed INScopus

A Comprehensive Study on Sustainable Manufacturing and Industry 4.0

Conference

Title of PaperA Comprehensive Study on Sustainable Manufacturing and Industry 4.0

Proceeding NameInternational Conference on Emerging Trends in Industry 4.0

PublisherIEEE Explore

Author NameA.V.Parsaniya, R.J.Parmar, M.A.Makhesana, K.M.Patel

OrganizationO.P. Jindal University, Raigarh, Chhattisgarh, India

Year , VenueMay 2021 , O.P. Jindal University, Raigarh, Chhattisgarh, India

Indexed INScopus

Optimization of Parameters and Sustainability Assessment Under Minimum Quantity Solid Lubrication-Assisted Machining of Inconel 718

Journal

Journal NameProcess Integration and Optimization for Sustainability

Title of PaperOptimization of Parameters and Sustainability Assessment Under Minimum Quantity Solid Lubrication-Assisted Machining of Inconel 718

PublisherSpringer

Published YearApril 2021

ISSN/ISBN No2509-4246

Indexed INScopus

A Novel Approach of Combined Edge Detection and Segmentation for Tool Wear Measurement in Machining

Journal

Journal NameProduction Engineering

Title of PaperA Novel Approach of Combined Edge Detection and Segmentation for Tool Wear Measurement in Machining

PublisherSpringer

Published YearMarch 2021

ISSN/ISBN No1863-7353

Indexed INScopus

Investigative Study of Cutting Parameters during Turning Hardened Steel with Carbide Inserts

Journal

Journal NameInternational Journal of Mechatronics and Manufacturing Systems

Title of PaperInvestigative Study of Cutting Parameters during Turning Hardened Steel with Carbide Inserts

PublisherInderscience

Published YearFebruary 2021

ISSN/ISBN No1753-1047

Indexed INScopus

Experimental investigations on surface roughness and tool wear during machining with vegetable oil -based Lubricant

Conference

Title of PaperExperimental investigations on surface roughness and tool wear during machining with vegetable oil -based Lubricant

Proceeding NameInternational Conference on Intelligent Mechanical Systems for Industry 4.0

Author NameH.P.Thakarar, V.Modi, M.A.Makhesana, K.M.Patel

OrganizationG H Raisoni College of Engineering and Management, Pune

Published YearFebruary 2021

Journal

Journal NameMaterialstoday: Proceedings

Title of PaperPerformance assessment of vegetable oil-based minimum quantity lubrication (MQL) in drilling

PublisherElsevier

Published YearNovember 2020

ISSN/ISBN No2214-7853

Indexed INScopus

Performance of PVD and CVD coated cutting tool inserts in machining under MQL-MQSL environment

Journal

Journal NameInternational Journal of Mechatronics and Manufacturing Systems

Title of PaperPerformance of PVD and CVD coated cutting tool inserts in machining under MQL-MQSL environment

PublisherInderscience Publishers

Volume Number13

Page Number210-229

Published YearNovember 2020

ISSN/ISBN No1753-1047

Indexed INScopus

Design of automatic vertical storage system

Book Chapter

Book NameTechnologies for Sustainable Development

PublisherCRC Press (Taylor & Francis Group) London

Author NameNishant Vyas, B.K.Mawandiya, M.A.Makhesana

Page Number293- 298

Chapter TitleDesign of automatic vertical storage system

Published YearSeptember 2020

ISSN/ISBN No9780367337377

Environmentally conscious machining of Inconel 718 with solid lubricant assisted minimum quantity lubrication

Journal

Journal NameMetal Powder Report

Title of PaperEnvironmentally conscious machining of Inconel 718 with solid lubricant assisted minimum quantity lubrication

PublisherElsevier

Published YearAugust 2020

ISSN/ISBN No0026-0657

Conference

Title of PaperCyber Physical Production System: An Introduction

Proceeding Name3rd Indo-German Conference on Sustainability in Engineering: Enhancing Future Skills and Entrepreneurship

Author NamePrem Rajpara, Jay Patel, M.A.Makhesana, Kaushik Patel

OrganizationBirla Institute of Technology and Science (BITS), Pilani and TU Braunschweig, Germany

Year , VenueSeptember 2019 , Birla Institute of Technology and Science (BITS), Pilani

Page Number1-5

Experimental Investigations and Selection of Solid Lubricant Assisted Lubrication Strategy in Machining with the Use of PROMETHEE

Book Chapter

Book NameAdvances in Intelligent Systems and Computing

PublisherSpringer, Singapore

Author NameM.A.Makhesana, K.M.Patel

Page Number241-251

Chapter TitleExperimental Investigations and Selection of Solid Lubricant Assisted Lubrication Strategy in Machining with the Use of PROMETHEE

Published YearJuly 2019

ISSN/ISBN No978-981-13-8195-9

Indexed INScopus

Study on the effect of process parameters with the use of Minimum Quantity Lubrication and Solid Lubricants in turning

Journal

Journal NameIndian Journal of Engineering and Material Science

Title of PaperStudy on the effect of process parameters with the use of Minimum Quantity Lubrication and Solid Lubricants in turning

PublisherCSIR-NISCAIR

Volume Number26

Page Number220-225

Published YearJuly 2019

ISSN/ISBN No0975-1017

Indexed INScopus

Performance assessment of CaF2 solid lubricant assisted minimum quantity lubrication in turning

Journal

Journal NameProcedia Manufacturing- Elsevier

Title of PaperPerformance assessment of CaF2 solid lubricant assisted minimum quantity lubrication in turning

PublisherElsevier

Volume Number33

Page Number43-50

Published YearMay 2019

ISSN/ISBN No2351-9789

Indexed INScopus

Experimental measurement and modelling of surface roughness in turning with CaF2 solid lubricant assisted minimum quantity lubrication

Journal

Journal NameInternational Journal of Experimental Design and Process Optimisation

Title of PaperExperimental measurement and modelling of surface roughness in turning with CaF2 solid lubricant assisted minimum quantity lubrication

PublisherInderscience Publishers

Volume Number6

Page Number13-25

Published YearJanuary 2019

ISSN/ISBN No2040-2252 (Print), 2040-2260 (Online)

Indexed INUGC List

Investigative Study of temperature produced during Turning Operation using MQL and solid lubricants

Conference

Title of PaperInvestigative Study of temperature produced during Turning Operation using MQL and solid lubricants

Proceeding NameProceedings of 7th International & 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference 2018

Publisher7th International & 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference 2018

Author NameAnand S. Patel, Mayur A. Makhesana, K.M.Patel

OrganizationCollege of Engineering Guindy, Anna University, Chennai, India

Year , VenueDecember 2018 , College of Engineering Guindy, Anna University, Chennai, India

Applicability of CaF2 solid lubricant assisted minimum quantity lubrication in turning for sustainable manufacturing

Conference

Title of PaperApplicability of CaF2 solid lubricant assisted minimum quantity lubrication in turning for sustainable manufacturing

Proceeding NameProceedings of 7th International & 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference 2018

Publisher7th International & 28th All India Manufacturing Technology, Design and Research (AIMTDR) Conference 2018

Author NameMayur A. Makhesana, K.M.Patel, Anand S. Patel

OrganizationCollege of Engineering Guindy, Anna University, Chennai, India

Year , VenueDecember 2018 , College of Engineering Guindy, Anna University, Chennai, India

An assessment of environmentally conscious lubrication techniques in Grinding: Use of minimum quantity lubrication, solid lubricants and cryogenic cooling

Journal

Journal NameInternational Journal of Sustainable Manufacturing

Title of PaperAn assessment of environmentally conscious lubrication techniques in Grinding: Use of minimum quantity lubrication, solid lubricants and cryogenic cooling

PublisherInderscience Publishers

Volume Number4

Page Number23-38

Published YearNovember 2018

ISSN/ISBN No1742-7223 (Print), 1742-7231 (Online)

Indexed INScopus, UGC List

Modelling and Analysis of Surface Roughness in turning operation using Minimum Quantity Solid Lubrication

Book Chapter

Book NameTechnology Drivers: Engine for Growth: Proceedings of the 6th Nirma University International Conference on Engineering

PublisherCRC Press (Taylor & Francis Group)

Author NameAnand S. Patel, K. M. Patel, Mayur A. Makhesana

Page Number265-269

Chapter TitleModelling and Analysis of Surface Roughness in turning operation using Minimum Quantity Solid Lubrication

Published YearOctober 2018

ISSN/ISBN No9781138560420

Performance assessment of CaF2 solid lubricant assisted minimum quantity lubrication in turning

Conference

Title of PaperPerformance assessment of CaF2 solid lubricant assisted minimum quantity lubrication in turning

Proceeding Name16th Global Conference on Sustainable Manufacturing

Publisher16th Global Conference on Sustainable Manufacturing

Author NameMayur A. Makhesana, K.M.Patel

OrganizationUniversity of Kentucky Lexington, Kentucky, USA

Year , VenueOctober 2018 , University of Kentucky Lexington, Kentucky, USA

Experimental investigations and selection of solid lubricant assisted lubrication strategy in machining with the use of PROMETHEE

Conference

Title of PaperExperimental investigations and selection of solid lubricant assisted lubrication strategy in machining with the use of PROMETHEE

Proceeding NameProceedings of International Conference on Advanced Engineering Optimization Through Intelligent Techniques

PublisherInternational Conference on Advanced Engineering Optimization Through Intelligent Techniques

Author NameMayur A. Makhesana, K.M.Patel

OrganizationSardar Vallabhbhai National Institute of Technology, Surat

Year , VenueAugust 2018 , Dept. of Mechanical Engg. S.V.N.I.T Surat

Experimental Investigations on the Effect of Process Parameters with the use of Minimum Quantity Solid Lubrication in Turning

Conference

Title of PaperExperimental Investigations on the Effect of Process Parameters with the use of Minimum Quantity Solid Lubrication in Turning

Proceeding NameProceedings of American Institute of Physics

Publisher American Institute of Physics

Author NameMayur A. Makhesana, K.M.Patel, B.K.Mawandiya

OrganizationNational Institute of Technology, Surathkal

Year , VenueJanuary 2018 , National Institute of Technology, Surathkal

Page Number020045-1–020045-7

ISSN/ISBN No0094 243X

Indexed INScopus, UGC List

Modelling and Analysis of Surface Roughness in turning operation using Minimum Quantity Solid Lubrication

Conference

Title of PaperModelling and Analysis of Surface Roughness in turning operation using Minimum Quantity Solid Lubrication

Proceeding Name6th Nirma University International Conference on Engineering

Publisher6th Nirma University International Conference on Engineering

Author NameAnand S. Patel, K.M.Patel, Mayur A. Makhesana

OrganizationInstitute of Technology, Nirma University

Year , VenueNovember 2017 , Institute of Technology, Nirma University

Experimental Investigation of temperature produced During Turning Operation using solid lubricants

Conference

Title of PaperExperimental Investigation of temperature produced During Turning Operation using solid lubricants

Proceeding NameProceedings of 6th Nirma University International Conference on Engineering

Publisher6th Nirma University International Conference on Engineering

Author NameChetan Hingane, Mayur A. Makhesana, K.M.Patel

OrganizationInstitute of Technology, Nirma University

Year , VenueNovember 2017 , Institute of Technology, Nirma University

Investigations on the application of minimum quantity solid lubrication in turning

Conference

Title of PaperInvestigations on the application of minimum quantity solid lubrication in turning

Proceeding NameProceedings of the ASME 2017 12th International Manufacturing Science and Engineering Conference

PublisherThe American Society of Mechanical Engineers

Author NameMayur A. Makhesana, K.M.Patel

OrganizationUniversity of Southern California, Los Angeles, California, USA

Year , VenueJune 2017 , University of Southern California, Los Angeles, California, USA

Page NumberV001T02A009

ISSN/ISBN No978-0-7918-5072-5

Indexed INScopus

An investigation on effects of machining parameters In turning with the use of minimum quantity Lubrication and solid lubricant

Conference

Title of PaperAn investigation on effects of machining parameters In turning with the use of minimum quantity Lubrication and solid lubricant

Proceeding NameProceedings of 4th international conference on Production and Industrial engineering

Publisher4th international conference on Production and Industrial engineering

Author NameMayur A. Makhesana, K.M.Patel

OrganizationNIT-Jalandhar

Year , VenueDecember 2016 , NIT-Jalandhar

Page Number1-6

Performance Assessment of Use of Solid Lubricants as Cooling Method in Machining Process

Conference

Title of PaperPerformance Assessment of Use of Solid Lubricants as Cooling Method in Machining Process

Proceeding NameProceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference

Publisher6th International & 27th All India Manufacturing Technology, Design and Research Conference

Author NameAnand S. Patel, Mayur A. Makhesana, K.M.Patel

OrganizationCollege of Engineering, Pune

Year , VenueDecember 2016 , College of Engineering, Pune

Page Number338-340

ISSN/ISBN No978-93-86256-27-0

Improvement in Machining Process Performance with the Application of Solid Lubricants

Conference

Title of PaperImprovement in Machining Process Performance with the Application of Solid Lubricants

Proceeding NameProceedings of 6th International & 27th All India Manufacturing Technology

Publisher6th International & 27th All India Manufacturing Technology

Author NameMayur A. Makhesana, K.M.Patel

OrganizationCollege of Engineering, Pune

Year , VenueDecember 2016 , College of Engineering, Pune

Page Number591-593

ISSN/ISBN No978-93-86256-27-0

Investigation to study the applicability of solid lubricants in machining for clean and green manufacturing

Journal

Journal NameIndustrial Lubrication and Tribology

Title of PaperInvestigation to study the applicability of solid lubricants in machining for clean and green manufacturing

PublisherEmerald Publisher

Volume Number68

Page Number591-596

Published YearSeptember 2016

ISSN/ISBN No0036-8792

Indexed INScopus, EBSCO, UGC List

Design and Development of Pinning Machine for pyro block assembly

Conference

Title of PaperDesign and Development of Pinning Machine for pyro block assembly

Proceeding NameProceedings of 4th National Conference on Innovative & Emerging Technologies

Publisher4th National Conference on Innovative & Emerging Technologies

Author NameAnkit S. Patel, Mayur A. Makhesana

OrganizationSmt. S. R. Patel Engineering College, Unjha

Year , VenueJune 2016 , Smt. S. R. Patel Engineering College, Unjha

ISSN/ISBN No978-81-925650-0-2

Performance Assessment and selection of solid lubricants for environmentally benign lubrication in machining

Conference

Title of PaperPerformance Assessment and selection of solid lubricants for environmentally benign lubrication in machining

Proceeding NameProceedings of 3rd International Conference on Industrial Engineering

Publisher3rd International Conference on Industrial Engineering

Author NameM.H.Patel, Mayur A. Makhesana, K.M.Patel

OrganizationSardar Vallabhbhai National Institute of Technology, Surat

Year , VenueNovember 2015 , Dept. of Mechanical Engg. S.V.N.I.T Surat

Page Number437-441

ISSN/ISBN No978-93-84935-56-6

Performance assessment on application of solid lubricants in machining: an approach towards cleaner production

Conference

Title of PaperPerformance assessment on application of solid lubricants in machining: an approach towards cleaner production

Proceeding NameProceedings of 17th ISME conference on Advances in Mechanical Engineering

Publisher17th ISME conference on Advances in Mechanical Engineering

Author NameMayur A. Makhesana, K.M.Patel

OrganizationIndian Institute of Technology, Delhi

Year , VenueOctober 2015 , Indian Institute of Technology, Delhi

Application of Improved COmplex PRoportional ASsessment (COPRAS) method for Rapid Prototyping system selection

Journal

Journal NameRapid Prototyping Journal

Title of PaperApplication of Improved COmplex PRoportional ASsessment (COPRAS) method for Rapid Prototyping system selection

PublisherEmerald Publishing

Volume Number21

Page Number671 - 674

Published YearOctober 2015

ISSN/ISBN No1355-2546

Indexed INScopus, EBSCO, UGC List

Comparison of dry and wet lubrication techniques in turning of EN-31 steel material

Conference

Title of PaperComparison of dry and wet lubrication techniques in turning of EN-31 steel material

Proceeding NameProceedings of International conference on Mechanical, Material, Industrial, Automotive, Aeronautical and Nano-Technology

PublisherInternational conference on Mechanical, Material, Industrial, Automotive, Aeronautical and Nano-Technology

Author NameM.H.Patel, Mayur A. Makhesana, K.M.Patel

OrganizationJawaharlal Nehru University, New Delhi

Year , VenueMarch 2015 , Jawaharlal Nehru University, New Delhi

Industrial Robot selection using Multiple Objective Decision Making methodology

Conference

Title of PaperIndustrial Robot selection using Multiple Objective Decision Making methodology

Proceeding NameProceedings of International conference on Design, Manufacturing and Mechatronics

PublisherInternational conference on Design, Manufacturing and Mechatronics

Author NameMayur A. Makhesana

OrganizationKJ college of engineering and management research, Pune

Year , VenueFebruary 2015 , KJ college of engineering and management research, Pune

Page Number12-15

Feasibility of application of solid lubricants in machining process: A review

Conference

Title of PaperFeasibility of application of solid lubricants in machining process: A review

Proceeding NameProceedings of 2nd International Conference on Industrial Engineering

Publisher2nd International Conference on Industrial Engineering

Author NameMayur A. Makhesana, K.M.Patel

OrganizationSardar Vallabhbhai National Institute of Technology, Surat

Year , VenueNovember 2013 , Dept. of Mechanical Engg. S.V.N.I.T Surat

Page Number960-963

ISSN/ISBN No978-93-83083-37-4

Selection of Lubricant in machining using Multiple Attribute Decision Making technique

Conference

Title of PaperSelection of Lubricant in machining using Multiple Attribute Decision Making technique

Proceeding NameProceedings of International Conference on Advanced Engineering Optimization Through Intelligent Techniques

Publisher International Conference on Advanced Engineering Optimization Through Intelligent Techniques

Author NameMayur A. Makhesana

OrganizationSardar Vallabhbhai National Institute of Technology, Surat

Year , VenueJuly 2013 , Dept. of Mechanical Engg. S.V.N.I.T Sura

Page Number205-210

A Fuzzy MODM approach for Decision making in the Manufacturing Environment

Conference

Title of PaperA Fuzzy MODM approach for Decision making in the Manufacturing Environment

Proceeding NameProceedings of International Conference on Innovations in Automation and Mechatronics Engineering

PublisherInternational Conference on Innovations in Automation and Mechatronics Engineering

Author NameMayur A. Makhesana

OrganizationG H Patel College of Engineering & Technology, Vallabh Vidyanagar

Year , VenueFebruary 2013 , G H Patel College of Engineering & Technology, Vallabh Vidyanagar

Page Number1-5

ISSN/ISBN No978-81-924744-0-3

Flexible Manufacturing System selection using Fuzzy Multiple Attribute Decision Making method

Conference

Title of PaperFlexible Manufacturing System selection using Fuzzy Multiple Attribute Decision Making method

Proceeding NameProceedings of 5th International Conference on Advances in Mechanical Engineering

Publisher5th International Conference on Advances in Mechanical Engineering

Author NameMayur A. Makhesana

OrganizationSardar Vallabhbhai National Institute of Technology, Surat

Year , VenueJune 2011 , Dept. of Mechanical Engg. S.V.N.I.T Surat

Page Number647-650

Material selection using PROMETHEE a Multiple Attribute Decision Making method

Conference

Title of PaperMaterial selection using PROMETHEE a Multiple Attribute Decision Making method

Proceeding NameProceedings of 1st International Conference on Recent Trends in Engineering

Publisher1st International Conference on Recent Trends in Engineering

Author NameMayur A. Makhesana, R.V.Rao

OrganizationInstitute of Technology, Nirma University

Year , VenueDecember 2010 , Institute of Technology, Nirma University

Page Number1-5

Multiple Attribute Decision Making method for Material selection using PROMETHEE

Conference

Title of PaperMultiple Attribute Decision Making method for Material selection using PROMETHEE

Proceeding NameProceedings of 4th International Conference on Advances in Mechanical Engineering

Publisher4th International Conference on Advances in Mechanical Engineering

Author NameMayur A. Makhesana, R.V.Rao

OrganizationSardar Vallabhbhai National Institute of Technology, Surat

Year , VenueSeptember 2010 , Dept. of Mechanical Engg. S.V.N.I.T Surat

Page Number844-849

Mihir Chauhan

Conceptualization and Topology Optimization of Ampheel: An Integration of Rolling Wheel and Turtle-Inspired Mechanism for Amphibious Mobile Robot

Journal

Journal NameInternational Journal of Robotics and Control Systems

Title of PaperConceptualization and Topology Optimization of Ampheel: An Integration of Rolling Wheel and Turtle-Inspired Mechanism for Amphibious Mobile Robot

Volume Number4(1)

Page Number334-353

Published YearMarch 2024

Navigation Control of Remotely Operated Underwater Vehicle

Journal

Journal NameInternational Journal of Satellite Communication & Remote Sensing

Title of PaperNavigation Control of Remotely Operated Underwater Vehicle

Volume Number8(1)

Page Number1-6

Published YearJanuary 2022

Proceedings of International e-Conference for students on Recent Innovations in Mechanical Engineering (RIME 2021)

Book

PublisherMechanical Engineering Students Association (MESA)

Published YearJuly 2021

ISSN/ISBN No978-93-5473-550-9

Effect of geometrical shape on axial deformation of soft actuator

Journal

Journal NameJournal of Physics: Conference Series

Title of PaperEffect of geometrical shape on axial deformation of soft actuator

PublisherIOP Publishing

Volume Number2115

Published YearJanuary 2021

ISSN/ISBN No17426588

Indexed INScopus

Abstract

Soft actuators are the latest trend of research because of their light weight and ease of manufacturing and control. Soft actuators have expanded their fields and taken place in many applications where linear or angular deflection is required. Soft actuators are very useful in the applications where deflection is required with soft touch. Soft Actuators are highly compliant and adaptive to unknown environments. Because of these characteristics, soft actuators are very popular in the field of medical and in the applications where interaction with fragile structure is required. The soft actuators can give required responses mostly depends on their shape. Linear or angular deformation can be achieved by changing the geometrical shape of actuators. This paper presents the effect of geometrical shape on axial deformation of soft pneumatic actuator. Samples of soft actuators are selected with various shapes for finite element analysis. Results are obtained in form of axial and lateral deformation. An attempt is made to achieve good amount of axial deformation with very less or negligible lateral deformation by selecting appropriate shape. Based on the generated results, the shape is identified which gives desired results and more suitable among the selected nine samples. This sample can be useful in the application having space constraint in lateral direction.

Stress analysis of an unsymmetric composite plate with variance of oval-shaped cutout

Journal

Journal NameMathematics and Mechanics of Solids

Title of PaperStress analysis of an unsymmetric composite plate with variance of oval-shaped cutout

PublisherSAGE Publication

Volume Number22(4)

Page Number692-707

Published YearApril 2017

Indexed INa:3:{i:0;s:6:"Scopus";i:1;s:14:"Web of Science";i:2;s:8:"UGC List";}

Stress concentration at the corners of polygonal hole in finite plate

Journal

Journal NameAerospace Science and Technology

Title of PaperStress concentration at the corners of polygonal hole in finite plate

PublisherElsevier

Volume Number58

Page Number197-206

Published YearNovember 2016

Indexed INa:2:{i:0;s:6:"Scopus";i:1;s:14:"Web of Science";}

Stress intensity factor for hypocycloidal hole in finite plate

Journal

Journal NameTheoretical and Applied Fracture Mechanics

Title of PaperStress intensity factor for hypocycloidal hole in finite plate

PublisherElsevier

Volume Number82

Page Number59-68

Published YearApril 2016

Indexed INa:3:{i:0;s:6:"Scopus";i:1;s:14:"Web of Science";i:2;s:8:"UGC List";}

Stresses in finite anisotropic plate weakened by rectangular hole

Journal

Journal NameInternational Journal of Mechanical Science

Title of PaperStresses in finite anisotropic plate weakened by rectangular hole

PublisherElsevier

Volume Number101

Page Number272-279

Published YearAugust 2015

Indexed INa:3:{i:0;s:6:"Scopus";i:1;s:14:"Web of Science";i:2;s:8:"UGC List";}

Journal

Journal NameInternational Journal of Metalcasting

Title of PaperReview on effect of tooling parameters on microwave processing of metallic materials with special emphasis on melting/casting application

PublisherSpringer Nature

Volume Number16(4)

Page Number2097 - 2127

Published YearOctober 2022

ISSN/ISBN No19395981

Indexed INScopus

Abstract

In recent years, microwave-based processing of metallic material has emerged as a novel technique that offers cost, time, and energy-saving solutions compared to conventional processing. Microwave processing of metals has been represented with past, present, and future research development. This article provides a brief overview of microwave interaction with metals, beginning with the fundamentals and progressing to applications in many fields such as sintering, joining, cladding, drilling, and casting with special tooling requirements. A special emphasis has been made on microwave casting applications with the necessary tooling design specifications of microwave applicator, susceptor, casket, crucibles, mold, and temperature measurement. The effect of different tooling design parameters on microstructure characteristics and mechanical properties of the processed material has been analyzed. In the end, the challenges in tooling design parameters, various processing strategies by critical analysis, and future research opportunities in microwave processing of metals have been outlined. © 2022, American Foundry Society.

Investigation of microstructural and wear properties of stir cast and friction stir processed AA 2014-based metal matrix composites

Journal

Journal NameAdvances in Materials and Processing Technologies

Journal

Journal NameSN Applied science

Title of PaperMicro-hardness and wear behavior of AA2014/Al2O3 surface composite produced by friction stir processing

PublisherSpringer Nature

Volume Number2

Page Number1760

Published YearOctober 2020

Indexed INScopus

A review on manufacturing the surface composites by friction stir processing

Journal

Journal NameMaterials and Manufacturing Processes

Title of PaperA review on manufacturing the surface composites by friction stir processing

PublisherTylor and Francis

Volume Number36(2)

Page Number135-170

Published YearSeptember 2020

ISSN/ISBN No1532-2475

Indexed INScopus

Joining of metal matrix composites using friction stir welding: a review

Journal

Journal NameMaterials and Manufacturing Processes

Title of PaperJoining of metal matrix composites using friction stir welding: a review

PublisherTaylor & Francis

Volume Number34(2)

Page Number123-146

Published YearNovember 2018

ISSN/ISBN No1042-6914

Indexed INScopus

Numerical simulation on an effect of backing plates on joint temperature and weld quality in air and immersed FSW of AA2014-T6

Journal

Journal NameInternational Journal of Advanced Manufacturing Technology

Title of PaperNumerical simulation on an effect of backing plates on joint temperature and weld quality in air and immersed FSW of AA2014-T6

PublisherSpringer

Volume Number99

Page Number1937-1951

Published YearNovember 2018

ISSN/ISBN No0268-3768

Indexed INScopus

Transient thermal analysis during friction stir welding between AA2014-T6 and Pure Copper

Conference

Title of PaperTransient thermal analysis during friction stir welding between AA2014-T6 and Pure Copper

Proceeding NameInternational Conference on Design, materials & Manufacture

PublisherAIP Publishing

Year , VenueApril 2018 , NIT Karnataka, Surathkal

Page Number020031

Indexed INUGC List

Automation and Standardization of Processes used in Packing and Logistics

Conference

Title of PaperAutomation and Standardization of Processes used in Packing and Logistics

Proceeding NameNUiCONE 2017

Year , VenueNovember 2017 , Nirma University

Welding speed effect on joint properties in air and immersed FSW of AA2014

Journal

Journal NameJournal of Engineering Manufacture

Title of PaperWelding speed effect on joint properties in air and immersed FSW of AA2014

PublisherSAGE Publications

Volume Number231(5)

Page Number897-909

Published YearApril 2017

ISSN/ISBN No09544054

Indexed INScopus

Multi-objective optimization of activated TIG welding process parameters using PROMETHEE

Conference

Title of PaperMulti-objective optimization of activated TIG welding process parameters using PROMETHEE

Proceeding Name28th International Conference on Production, Mechanical and Automobile Engineering (ICPMAE 2017)

Year , VenueMarch 2017 , M.S. University, Baroda, Gujarat

Page Number19-24

ISSN/ISBN No978-93-85225-88-8

Effect of rotational speed on microstructure and mechanical properties of welded joint in air FSW of AA2014

Conference

Title of PaperEffect of rotational speed on microstructure and mechanical properties of welded joint in air FSW of AA2014

Proceeding Name6th International and 27th All India Manufacturing Technology, Design and Research Conference

Year , VenueDecember 2016 , College of Engineering,Pune

Condition Monitoring of Rolling Element Bearing – A Case Study, Thermal Fluid-Science and Tribo Applications

Conference

Title of PaperCondition Monitoring of Rolling Element Bearing – A Case Study, Thermal Fluid-Science and Tribo Applications

Year , VenueMay 2016 , SVNIT, Surat

Effects of Activating Flux on the Welded Joint Characteristics and Microstructure in Tungsten Inert Gas Welding

Conference

Title of PaperEffects of Activating Flux on the Welded Joint Characteristics and Microstructure in Tungsten Inert Gas Welding

Proceeding Name2nd International conference on design, analysis, manufacturing & simulation

Year , VenueApril 2016 , Saveetha School of Engineering, Chennai

Multi-objective optimization of FSW process parameters using PROMETHEE

Conference

Title of PaperMulti-objective optimization of FSW process parameters using PROMETHEE

Proceeding NameNational conference on Design, analysis and optimization in mechanical engineering

Year , VenueMarch 2016 , M.S. University, Baroda, Gujarat

Page Number215-221

Thermal numerical modelling of friction stir welded AA2014-T6 aluminum alloy and its experimental verification

Conference

Title of PaperThermal numerical modelling of friction stir welded AA2014-T6 aluminum alloy and its experimental verification

Proceeding Name17th ISME Conference

Year , VenueOctober 2015 , IIT Delhi, New Delhi

Prediction of temperature at weld line in air and immersed friction stir welding and its experimental validation

Journal

Journal NameInternational Journal of Advanced Manufacturing Technology

Title of PaperPrediction of temperature at weld line in air and immersed friction stir welding and its experimental validation

PublisherSpringer

Volume Number79

Page Number1239-1246

Published YearJuly 2015

ISSN/ISBN No0268-3768

Indexed INScopus

Prediction of temperature at weld line in air and immersed friction stir welding and its experimental validation

Journal

Journal NameTransactions of the Indian Institute of Metals

Title of PaperPrediction of temperature at weld line in air and immersed friction stir welding and its experimental validation

PublisherSpringer

Volume Number79

Page Number1239-1246

Published YearJuly 2015

ISSN/ISBN No0268-3768

Indexed INScopus

Prediction of tensile strength and microstructure characterization of immersed friction stir welding of aluminium alloy AA2014-T4

Journal

Journal NameIndian Journal of Engineering & Materials Sciences

Title of PaperPrediction of tensile strength and microstructure characterization of immersed friction stir welding of aluminium alloy AA2014-T4

PublisherNISCAIR

Volume Number22

Page Number133-140

Published YearJanuary 2015

ISSN/ISBN No 0975-1017

Indexed INScopus

Mathematical Model to Predict Tensile Strength of Friction Stir Welded Commercial Aluminium Alloy

Conference

Title of PaperMathematical Model to Predict Tensile Strength of Friction Stir Welded Commercial Aluminium Alloy

Proceeding NameInternational Conference on Design, manufacturing and Mechatronics

Year , VenueJanuary 2014 , KJEI's Trinity College of Engineering and Research, Pune

Determination of an optimum parametric combination using a tensile strength prediction model for friction stir welded AA8011 aluminium alloy

Journal

Journal NameInternational Journal of Manufacturing Research

Title of PaperDetermination of an optimum parametric combination using a tensile strength prediction model for friction stir welded AA8011 aluminium alloy

PublisherInderscience

Volume Number9(3)

Page Number258-275

Published YearJanuary 2014

Indexed INScopus

Niraj Shah

Influence of secondary air opening on the performance of gasifier-based improved biomass cookstove

Conference

Title of PaperInfluence of secondary air opening on the performance of gasifier-based improved biomass cookstove

Proceeding Name2nd International Conference on Recent Advancements in Materials science And Nanotechnology (RAMAN)-2024

Author NameKinnary Modi, Amita Chaudhary, Darshit Upadhyay, Chintan Patel, Shrey Desai, Niraj Shah

Year , VenueMarch 2024 , Nirma University

Thermal and Hydraulic Study of Mini-Channel with Irregular Surface Topology

Book Chapter

Book NameLecture Notes in Mechanical Engineering ((LNME))

PublisherSpringer Singapore

Author NameVishwajeet Rahewar, Prayag Desai, Sheetal Pandya, Amit Arora, Niraj Shah

Page Number563–572

Chapter TitleThermal and Hydraulic Study of Mini-Channel with Irregular Surface Topology

Published YearJanuary 2024

ISSN/ISBN NoPrint ISBN978-981-99-7826-7 Online ISBN978-981-99-7827-4

Indexed INScopus, Others

Abstract

The present study aims at identifying the critical Reynolds number for transition from laminar to turbulent in irregular shaped minichannels. Numerical study including conjugate heat transfer and axial conduction is carried out using commercially available software ANSYS fluent®. The channel of length 105 mm, width 4.5 mm, and height 2 mm is fabricated in an aluminium substrate of length 114 mm (L), width 15 mm (W) and height 6.3 mm (H). Water is used as working fluid. Average hydraulic diameter (Dh) of mini-channel is 2.86 mm, and cross section area varies non-uniformly from 10 mm2 to 18 mm2 along the length. Problem is set up with mass flow rate and outflow boundary condition at inlet and outlet respectively. Bottom wall is given with uniform heat flux (q) of 200 watts thus incorporating conduction in solid wall of channel. Temperature difference between the inlet and outlet are compared with experimental measurement and found to be in good agreement. It is observed that the heat transfer coefficient as well as pressure drop both increases with increase in mass flow rate, however, increase in pressure drop is found larger compared to increase in heat transfer coefficient. Further, we also found the axial conduction in the solid wall. It is interesting to note that the transition from laminar to turbulent is observed at lower Reynolds number. Present work provides platform to study thermal and fluid flow behaviour of the irregular shaped mini-channels.

Parametric investigation of focusing of micro-particle in serpentine micro-channels

Conference

Title of PaperParametric investigation of focusing of micro-particle in serpentine micro-channels

Proceeding Name10th International and 50th National Conference on Fluid Mechanics and Fluid Power

Author NameMr. Bruhad S Naik, Dr. Niraj K Shah, Dr. Absar M Lakdawala

Year , VenueDecember 2023 , IIT Jodhpur, Jodhpur, Rajasthan

A numerical study on pulsatile non-Newtonian hemodynamics in double-fusiform abdominal aortic aneurysms

Journal

Journal NamePhysics of Fluids

Title of PaperA numerical study on pulsatile non-Newtonian hemodynamics in double-fusiform abdominal aortic aneurysms

PublisherAmerican Institute of Physics

Volume Number34

Page Number 031908

Published YearMarch 2022

ISSN/ISBN No1070-6631

Indexed INScopus, Web of Science

Optimization of Microchannel with Dovetail Ribs at Sidewalls for Maximum Convective Heat Transfer and Minimum Pressure Drop with Conjugate Heat Transfer

Conference

Title of PaperOptimization of Microchannel with Dovetail Ribs at Sidewalls for Maximum Convective Heat Transfer and Minimum Pressure Drop with Conjugate Heat Transfer

Proceeding NameProceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC)

Year , VenueDecember 2019 , IIT Roorkee

Study of wall thickness on axial conduction with conjugate heat transfer in micro-scale flows

Conference

Title of PaperStudy of wall thickness on axial conduction with conjugate heat transfer in micro-scale flows

Proceeding NameNational Conference on Emerging Trends in Mechanical Engineering (NCETME – 2019)

Published YearFebruary 2019

Experimental Investigation on Performance of Low Temperature Multilayer Insulation

Journal

Journal NameArpn Journal of Engineering and Applied Sciences

Title of PaperExperimental Investigation on Performance of Low Temperature Multilayer Insulation

PublisherNaik S., Memon S., Bhatt A., Shah N.K.

Page Number2886-2891

Published YearJanuary 2019

Comparision of Various Presure Based Boundary Conditions for Three-Dimensional Subsonic DSMC Simulations

Journal

Journal NameJournal of Fluid Engineering

Title of PaperComparision of Various Presure Based Boundary Conditions for Three-Dimensional Subsonic DSMC Simulations

PublisherASME

Volume Number140(3), 031205

Page Number031205-031217

Published YearOctober 2017

ISSN/ISBN No0098-2202

Indexed INScopus

Abstract

Three-dimensional (3D) direct simulation Monte Carlo (DSMC) has been used to simulate flow in a straight microchannel using an in-house parallelized code. In the present work, a comparative study of seven boundary conditions is carried out with respect to time required for achieving steady-state, accuracy in predicting the specified pressure at the boundaries, and the total simulation time require

Experimental Investigation on Reduction of NOx Emission of Compression Ignition Engine Fuelled with Bio-Diesel and Diethyl Ether

Journal

Journal NameInternational Journal of Global Warming

Title of PaperExperimental Investigation on Reduction of NOx Emission of Compression Ignition Engine Fuelled with Bio-Diesel and Diethyl Ether

PublisherP D Patel, Niraj Shah, Sajan Chourasia, Niraj K Shah, Absar M. Lakdawala, Rajesh N. Patel

Volume Number11

Published YearJanuary 2017

Experimental investigation on reduction of NOx emission of compression ignition engine fuelled with bio-diesel and diethyl ether

Journal

Journal NameInternational Journal of Global Warming (IJGW)

Title of PaperExperimental investigation on reduction of NOx emission of compression ignition engine fuelled with bio-diesel and diethyl ether

PublisherInderScience

Volume Number Vol. 11

Page Number431-448

Published YearJanuary 2017

Indexed INScopus

Abstract

Selection of DSMC Parameters for Reducing Computational Expense in Simulation of 3D Microchannel Flows

Conference

Title of PaperSelection of DSMC Parameters for Reducing Computational Expense in Simulation of 3D Microchannel Flows

Proceeding Name30th International Symposium on Rarefied Gas Dynamics (RGD 30)

Year , VenueJuly 2016 , University of Victoria, Canada

Cold Flow Simulation of Helical Intake Manifold for Single Cylinder Engine

Journal

Journal NameINROADS

Title of PaperCold Flow Simulation of Helical Intake Manifold for Single Cylinder Engine

PublisherDeep Badheka, Vinay Nanani, Tejas Raval, Absar Lakdawala, Niraj Shah

Volume Number5

Page Number353-357

Published YearJune 2016

Hydraulic Analysis of Vertical Pumps

Journal

Journal NameINROADS

Title of PaperHydraulic Analysis of Vertical Pumps

Conference

Title of PaperExperimental Investigation of Downdraft Gasifier with Co-firing of Wood and Lignite

Year , VenueJuly 2013 , Oranized by Krishi Sanskriti at JNU

CFD Analysis of Spatial Distribution of Various Parameters in Downdraft Gasifier

Journal

Journal NameProcedia Engineering

Title of PaperCFD Analysis of Spatial Distribution of Various Parameters in Downdraft Gasifier

PublisherPatel D. K., Shah N. K. Patel R. N.

Volume Number51

Page Number764-769

Published YearJanuary 2013

Testing of Rigid Cellular Thermal Insulation as per Indian Standards

Journal

Journal NameInternational Journal of Mechanical and Industrial Engineering (IJMIE)

Title of PaperTesting of Rigid Cellular Thermal Insulation as per Indian Standards

PublisherN K Shah, S V Jain, Arpit Parekh, Rohit Patel

Volume Number3

Page Number56-61

Published YearJanuary 2013

ISSN/ISBN No2231- 6477

CFD Analysis of Spatial Distribution of Various Parameters in Downdraft Gasifier

Conference

Title of PaperCFD Analysis of Spatial Distribution of Various Parameters in Downdraft Gasifier

Proceeding Name3rd International Conference on Engineering on "Current Trends in Technology" (NUiCONE)

Year , VenueDecember 2012 , Nirma University Ahmedabad, India

Comparison of DSMC and Experimental Investigation for Gas flow in Microchannel

Conference

Title of PaperComparison of DSMC and Experimental Investigation for Gas flow in Microchannel

Proceeding Name21st International Conference on Discrete Simulation of Fluid Dynamics (DSFD)

Year , VenueJuly 2012 , Bangalore, India

Numerical Transient Analysis of Heat Transfer of Reactor for Magnesium Based Alloy for Hydrogen Storage Application

Conference

Title of PaperNumerical Transient Analysis of Heat Transfer of Reactor for Magnesium Based Alloy for Hydrogen Storage Application

Proceeding NameInternational Conference on Mechanical and Industrial Engineering (ICMIE)

Year , VenueApril 2012 , Goa India

Numerical Transient Analysis of Heat Transfer of Reactor for Magnesium Based Alloy for Hydrogen Storage Application

Journal

Journal NameInternational Journal of Mechanical and Industrial Engineering (IJMIE)

Title of PaperNumerical Transient Analysis of Heat Transfer of Reactor for Magnesium Based Alloy for Hydrogen Storage Application

PublisherN. K. Shah, K. G. Bambhaniya, G. S. Grewal

Effects of Machining Parameters of C45 Steel Applying Vegetable Lubricant with Minimum Quantity Cooling Lubrication (MQCL)

Journal

Journal NameLubricants

Title of PaperEffects of Machining Parameters of C45 Steel Applying Vegetable Lubricant with Minimum Quantity Cooling Lubrication (MQCL)

PublisherMDPI

Volume Number11 (8)

Page Number332

Published YearAugust 2023

Indexed INScopus, Web of Science

Neural Network Based Classifier for Tool Wear Monitoring and Prediction During Machining

Book Chapter

Book NameAdvances in Industrial and Production Engineering

PublisherSpringer Nature Singapore

Author NamePJ Bagga, MA Makhesana, Premal Doshi, Krutik Jain, KM Patel

Page Number319-329

Chapter TitleNeural Network Based Classifier for Tool Wear Monitoring and Prediction During Machining

Published YearJuly 2023

Indexed INScopus

Investigation on the effect of process parameters and optimization using GRA under biodegradable oil based MQL in machining

Journal

Journal NameInternational Journal on Interactive Design and Manufacturing

Title of PaperInvestigation on the effect of process parameters and optimization using GRA under biodegradable oil based MQL in machining

PublisherSpringer, Paris

Page Number1-12

Published YearJuly 2023

Indexed INScopus, Web of Science

Machinability investigation of Ti-6Al-4V titanium alloy under dry, flood, MQL and nanofluid-MQL techniques using textured tools

Journal

Journal NameAdvances in Materials and Processing Technologies

Title of PaperMachinability investigation of Ti-6Al-4V titanium alloy under dry, flood, MQL and nanofluid-MQL techniques using textured tools

PublisherTaylor & Francis

Page Number1-14

Published YearApril 2023

Journal

Journal NameInternational Journal on Interactive Design and Manufacturing

Title of PaperExperimental investigation of different NN approaches for tool wear prediction based on vision system in turning of AISI 1045 steel

PublisherSpringer

Published YearNovember 2022

ISSN/ISBN No1955-2505

Indexed INScopus, Web of Science

Evaluation of Surface Roughness, Tool Wear and Chip Morphology during Machining of Nickel-Based Alloy under Sustainable Hybrid Nanofluid-MQL Strategy

Journal

Journal NameLubricants

Title of PaperEvaluation of Surface Roughness, Tool Wear and Chip Morphology during Machining of Nickel-Based Alloy under Sustainable Hybrid Nanofluid-MQL Strategy

PublisherMDPI

Volume Number10

Page Number1-12

Published YearNovember 2022

ISSN/ISBN No2075-4442

Indexed INScopus, Web of Science

Neural Network Based Classifier for Tool Wear Monitoring and Prediction during Machining

Conference

Title of PaperNeural Network Based Classifier for Tool Wear Monitoring and Prediction during Machining

Proceeding Name3rd Biennial International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2022)

Author NamePrashant Bagga

OrganizationDepartment of Mechanical Engineering, Amity School of Engineering & Technology, Amity University Uttar Pradesh

Year , VenueAugust 2022 , Noida, Uttar Pradesh

Indexed INScopus

Conference

Title of PaperTool Condition Monitoring Using Image Processing Techniques

Proceeding Name7th Nirma University International Conference on Engineering

PublisherInstitute of Technology, Nirma University

OrganizationInstitute of Technology, Nirma University

Year , VenueNovember 2017 , Institute of Technology, Nirma University

Page Number7th Nirma University International Conference on Engineering

Machine learning technique to control process parameters in abrasive water jet machining

Conference

Title of PaperMachine learning technique to control process parameters in abrasive water jet machining

Proceeding NameEmerging Trends in Electrical,Electronics,Instrumentation and Computer engineering

Author NamePrashant J Bagga

OrganizationInstitute for Research and Development India and Bhilai Institute of Technology

Year , VenueMarch 2014 , Raipur, Chhattisgarh

Real time depth computation using stereo imaging

Journal

Journal NameJournal Electrical and Electronic Engineering

Title of PaperReal time depth computation using stereo imaging

PublisherSciencePG

Volume Number1(2)

Page Number51-54

Published YearJune 2013

Interpersonal Skills

Book

PublisherAtul Prakashan, Ahmedabad

Published YearApril 2007

Design Challenges of Routing algorithms

Conference

Title of PaperDesign Challenges of Routing algorithms

Proceeding NameNational Conference On Current Trends In Technology

PublisherInstitute of Technology, Nirma University

OrganizationInstitute of Technology, Nirma University

Year , VenueNovember 2006 , Nirma University

Last Minute Revision Programming in C

Volume Number26

Page Number105821

Published YearJanuary 2023

ISSN/ISBN No2589-0042

Journal

Journal NameJournal of CO2 Utilization

Title of PaperMicrofluidic Analysis of Seawater-based CO2 Capture in an Amine Solution with Nickel Nanoparticle Catalysts

PublisherScience Direct ELSEVIER

Volume Number53

Published YearNovember 2021

ISSN/ISBN NoISSN: 2212-9820

Indexed INScopus

The examination, evaluation and comparison of corrosion effect on different metal surface by various crops based biodiesel

Journal

Journal NameJournal of Mechanical Engineering Science

Title of PaperThe examination, evaluation and comparison of corrosion effect on different metal surface by various crops based biodiesel

PublisherSAGE Journal

Page Number16

Published YearNovember 2020

ISSN/ISBN No(ISSN (Print): 2289-4659; e-ISSN: 2231-8380)

Indexed INScopus, Web of Science, EBSCO

Abstract

Biodiesel is relatively higher corrosive compared to Diesel; consequently, the concern of viability is now a foremost issue. The biodiesel is self-oxidative in the environment; thus, its characteristics might be changed as fuel. The current work investigates the behavior of numerous biodiesel corresponding to corrosion when exposed to the surface of metal coupons. A gas chromatography mass spectrometry (GC-MS) was performed on eight biodiesel and a hypothesis was proposed to corroborate the hypothesis; static immersion tests, scanning electron microscopic (SEM) and surface roughness analysis were conducted. The immersion test was conducted for 150 days at ambient temperature conditions; later on, the corrosion rate of metals was examined. Results indicate that the Bronze has a maximum corrosion rate of 0.0674 mpy with Karanja biodiesel, followed by palm biodiesel. The Karanja biodiesel has the highest susceptibility to corrosion with all metals, while the Diesel is found to be the lowest with intermediate values for Rapeseed and Castor.

Air-Steam gasification of lignite in a fixed bed gasifier: Influence of steam to lignite ratio on performance of downdraft gasifier Energy

Journal

Journal NameEnergy

Title of PaperAir-Steam gasification of lignite in a fixed bed gasifier: Influence of steam to lignite ratio on performance of downdraft gasifier Energy

PublisherElsevier

Volume Number211

Page Number11

Published YearJune 2020

ISSN/ISBN No0360-5442

Indexed INScopus

Effect of Geometrical Parameters on the Thermal Performance of Ammonia-Based Trapezoidal-Shaped Axial Grooved Heat Pipe

Journal

Journal NameJournal of Heat Transfer

Title of PaperEffect of Geometrical Parameters on the Thermal Performance of Ammonia-Based Trapezoidal-Shaped Axial Grooved Heat Pipe

PublisherASME

Volume Number141

Page Number121801-1

Published YearDecember 2019

ISSN/ISBN No0022-1481

Indexed INScopus

Effect of catalyst to lignite ratio on the performance of a pilot-scale fixed bed gasifier Energy

Journal

Journal NameEnergy

Title of PaperEffect of catalyst to lignite ratio on the performance of a pilot-scale fixed bed gasifier Energy

Volume Number189

Published YearDecember 2019

Indexed INScopus

Effect of Equivalence Ratio on the Performance of the Downdraft Gasifier - Experiment and Modelling Approach

Journal

Journal NameEnergy

Title of PaperEffect of Equivalence Ratio on the Performance of the Downdraft Gasifier - Experiment and Modelling Approach

PublisherElsevier

Volume Number168

Page Number833-846

Published YearFebruary 2019

ISSN/ISBN No0360-5442

Indexed INScopus, Web of Science

Abstract

This paper deals with experimental and modelling studies carried out for different Equivalence Ratio(ER). Seven different ER (0.24e0.386) were selected to investigate the downdraft gasifier performance.The lignite and sawdust briquette (70:30, %wt.) were used as feedstock in a 10 kWe atmospheric pressuredowndraft gasifier. The fuel consumption and air consumption were observed to exist in the range of0.54 kg h1to 11.1 kg h1and 0.59 kg h1to 19.5 kg h1respectively. The Lower Heating Value (LHV) andgas yield were found to be 4.91 MJ Nm3and 2.99 Nm3kg1respectively at 0.386 ER. Tar and ParticulateMatter (PM) were found in the range of 516.3 mg Nm3to 565.23 mg Nm3and 47.86 mg Nm3to57.29 mg Nm3respectively for different ER. The CGE observed was 80.03% whereas the tar and PM werereported as 516.3 mg Nm3and 47.86 mg Nm3respectively at ER of 0.386. A thermo-equilibrium modelwas developed to estimate the producer gas compositions and LHV. The results were compared with theexperimental results from the literature and good agreement between the two was observed.

Study on Tribological Behavior of Biodiesel – Diethyl Ether (B20A4) Blend for Long Run Test on Compression Ignition Engine

Journal

Journal NameFuel

Title of PaperStudy on Tribological Behavior of Biodiesel – Diethyl Ether (B20A4) Blend for Long Run Test on Compression Ignition Engine

PublisherElsevier

Volume Number230

Page Number64-67

Published YearOctober 2018

ISSN/ISBN No0016-2361

Indexed INScopus, Web of Science, UGC List, Others

Abstract

The gradual reduction of world petroleum reserves, growths in prices of petroleum-based fuels and environmental pollution has increased attention to the search for unconventional fuels such as biodiesel. It has remained the focus of an extensive amount of research since it is renewable and reduces the emission of pollutants. Though, some of the significant issues like compatibility of biodiesel with the crankcase lube oil, thermal stability of lube oil with biodiesel, changes in physical and chemical properties of lubricating oil with biodiesel, etc. have not been adequately inspected. These requirements are to be addressed in order to confirm the long-term suitability of biodiesel in a current family of diesel engines. In the present work, these problems are addressed. With an overall objective of life cycle analysis, a long run endurance test (512 h) is carried out on CI engines fuelled with diesel and the optimized blend of bio-diesel fuel (B20A4) respectively. The endurance tests are directed as per IS 10,000 for the examination of wear of engine components, lubricant's properties, suspended impurities, and wear metal debris. The wear of the various component of the engine is characterized by dimension and weight measurements. Lube oil analysis (Atomic Absorption Spectroscopy – AAS, Ferrography) were performed on oil samples, taken after every 128 h. The oil analysis suggested that the wear of B20A4 fuelled engine is substantially lower compared to the diesel. A regression model was also proposed to predict the wear of the engine. The proposed regression model can be taken one step further to predict the overall wear of the engine. The total concentration of various metals debris collected in the lube oil sample (predicted using regression model) was found to be 640 mg/kg and 420 mg/kg for diesel and B20A4 respectively.

Journal

Journal NameIETE journal of research

Title of PaperDESIGN AND DEVELOPMENT OF A LOW-COST VISION-BASED 6 DOF ASSISTIVE FEEDING ROBOT FOR THE AGED AND SPECIALLY-ABLED PEOPLE

PublisherTaylor & Francis

Volume Number1

Page Number1-23

Published YearJanuary 2023

ISSN/ISBN No 0974-7338

Indexed INScopus

Journal

Journal NameInternational Journal of Mechanical Sciences

Title of PaperOptimum design of laminates containing an elliptical hole

Publishersciencedirect

Volume Number85

Page Number76-87

Published YearAugust 2014

Indexed INScopus, Web of Science, UGC List

Economic Analysis of Pump as Turbine Operating Under Erosive Environment

Conference

Title of PaperEconomic Analysis of Pump as Turbine Operating Under Erosive Environment

Proceeding NameFluid Mechanics and Fluid Power (FMFP-2023)

Author NameRoshan Tandel, Rajesh Patel, and Sanjay Jain

OrganizationIIT Jodhpur

Published YearDecember 2023

Indexed INScopus

Correlation development of erosive wear and silt erosion failure mechanisms for pump as turbine

Journal

Journal NameEngineering Failure Analysis

Title of PaperCorrelation development of erosive wear and silt erosion failure mechanisms for pump as turbine

PublisherElsevier

Volume Number153

Page Number107610

Published YearNovember 2023

ISSN/ISBN No1873-1961

Indexed INScopus

A state-of-art review on Bladeless Wind Turbine

Journal

Journal NameJournal of Physics: Conference Series

Title of PaperA state-of-art review on Bladeless Wind Turbine

PublisherIOP Publishing Ltd

Volume Number1950

Published YearFebruary 2021

ISSN/ISBN No17426596

Indexed INScopus

Abstract

As a result of continuous depletion of non-renewable energy sources, new methods of harvesting energy are being developed. A unique way of harvesting wind energy, namely Bladeless Wind Turbine (BWT) is discussed in this paper. It differs from conventional turbine by harvesting energy through Vortex Induced Vibration (VIV) which is safe and quiet in operation. It has no bearings, gears or any rotating device hence it has low maintenance cost and high life. The scope of BWT as the renewable energy source varies from offshore to wind farms considering the availability of high intensity winds. BWT is a trio of diverse engineering branches: Electrical Engineering, Fluid Dynamics and Mechanics of Solids that often makes it nonlinear as well as complex. This article includes a basis for vortex-induced vibrations, dynamic modelling, components of BWT and energy harvesting unit. Optimum shape to harvest the energy is outlined in combination with mathematical model of the turbine. Various modes to harness vibrational energy, including different orientations and surface extensions, to widen the operating range and increase performance are covered in the review. This paper is a complete outline of BWT which shows the advancement of technology from VIV to commercially available products.

Silt Erosion Effects on Pump Running in Turbine mode

Conference

Title of PaperSilt Erosion Effects on Pump Running in Turbine mode

Journal NameMaterials and Manufacturing Processes

Title of PaperSingle-stage single point incremental square hole flanging of AA5052 material

PublisherTaylor & Francis

Published YearOctober 2022

Indexed INScopus

Formability studies of Aluminium 5052 material in square hole flanging using single point incremental forming

Journal

Journal NameAcademic Journal of Manufacuring Engineering

Title of PaperFormability studies of Aluminium 5052 material in square hole flanging using single point incremental forming

Volume Number19

Page Number34-40

Published YearOctober 2021

Indexed INScopus

Effect of feed and step depth in hole flanging using single point incremental forming

Journal

Journal NameJournal of Physics: conference series

Title of PaperEffect of feed and step depth in hole flanging using single point incremental forming

PublisherIOP science

Published YearOctober 2020

Indexed INScopus

Experimental study on effect of tool diameter on thickness, height and geometric accuracy of flange in hole flanging using single point incremental forming

Book Chapter

Book NameTechnologies for Sustainable Development - Proceedings of the 7th Nirma University International Conference on Engineering, NUICONE 2019

PublisherTaylor & Francis

Author NameRudreshkumar Makwana, Bharat Modi, Kaushik Patel

Chapter TitleExperimental study on effect of tool diameter on thickness, height and geometric accuracy of flange in hole flanging using single point incremental forming

Published YearJanuary 2019

Indexed INScopus

Performance Parameter Based Design of Cooling Channel For Plastic Injection Moulding Process

Conference

Title of PaperPerformance Parameter Based Design of Cooling Channel For Plastic Injection Moulding Process

Proceeding NameAdvancements and recent innovations in Mechanical, Production and Industrial Engineering

Author NameBipin Sharma, Vinod Sutariya, Mitesh Panchal, Rudresh Makwana

Year , VenueApril 2017 , I.T.S Engineering College, Greater Noida,Uttar Pradesh, India

Indexed INOthers

Analysis of conventional and conformal cooling channels of hand torch in injection moulding

Conference

Title of PaperAnalysis of conventional and conformal cooling channels of hand torch in injection moulding

Proceeding NameInternational conference on emerging trends in mechanical engineering 2017

Author NameBipin Sharma, Vinod Sutariya, Mitesh Panchal, Rudresh Makwana

Year , VenueFebruary 2017 , G H Patel college of engineering and technology, Vallabh vidyanagar, Gujarat, India

Indexed INOthers

Factor optimization of cnc vertical machining center for en24 steel using taguchi's method

Conference

Conference

Title of PaperA rule base expert system for diagnosis of faults causing boiler tripping and suggesting relative actions

Proceeding NameRecent Advances in Mechanical Engineering 2011

Author NameRudresh Makwana

Year , VenueMarch 2011 , K.S. Rangasamy College of Technology, Tiruchengode, Tamilnadu, India

Indexed INOthers

Sanjay Jain

Effect of shape and orientation of flat heat pipe on its thermal performance

Book Chapter

Book NameLecture Notes in Mechanical Engineering: Recent Advances in Mechanical Engineering

PublisherSpringer

Author NameJigneshsinh Rathod, Vikas Lakhera, Sanjay Jain

Page Number611-622

Chapter TitleEffect of shape and orientation of flat heat pipe on its thermal performance

Published YearMarch 2024

ISSN/ISBN No2195-4364

Development of novel low-speed open jet wind tunnel equipped with plenum chamber for testing of aero-rotors

Journal

Journal NameResults in Engineering

Title of PaperDevelopment of novel low-speed open jet wind tunnel equipped with plenum chamber for testing of aero-rotors

PublisherElsevier

Volume Number21

Page Number101913

Published YearMarch 2024

ISSN/ISBN No2590-1230

Indexed INScopus

Performance of water-based loop heat pipe at different ambient conditions for thermal management in terrestrial applications

Book Chapter

Book NameLecture Notes in Mechanical Engineering, Fluid Mechanics and Fluid Power, Volume 1 (FMFP 2022)

PublisherSpringer

Author NameShail N. Shah, Fagun A. Pithadiya, Sanjay V. Jain

Page Number15-26

Chapter TitlePerformance of water-based loop heat pipe at different ambient conditions for thermal management in terrestrial applications

Published YearJanuary 2024

ISSN/ISBN No2195-4364

Performance enhancement of solar air heater with reverse NACA 0040 profile ribs in v-down orientation

Book Chapter

Book NameLecture Notes in Mechanical Engineering (Fluid Mechanics and Fluid Power, Volume 7) (FMFP 2022)

PublisherSpringer

Author NameTejas Bhavsar, Kalp Patel, Sanjay V. Jain, and Vikas J. Lakhera

Page Number201-214

Chapter TitlePerformance enhancement of solar air heater with reverse NACA 0040 profile ribs in v-down orientation

Published YearDecember 2023

ISSN/ISBN No978-981-99-7047-6

Correlation development of erosive wear and silt erosion failure mechanisms for pump as turbine

Journal

Journal NameEngineering Failure Analysis

Title of PaperCorrelation development of erosive wear and silt erosion failure mechanisms for pump as turbine

PublisherElsevier

Volume Number153

Page Number107610

Published YearNovember 2023

ISSN/ISBN No1873-1961

Indexed INScopus

Experimental investigations on novel orientation study on axially grooved heat pipe with two evaporators and one condenser with multiple branches

Journal

Journal NameHeat and Mass Transfer

Title of PaperExperimental investigations on novel orientation study on axially grooved heat pipe with two evaporators and one condenser with multiple branches

PublisherSpringer

Volume Number60

Page Number377-393

Published YearNovember 2023

Indexed INScopus

Effects of Ambient Condition on the Performance of Ammonia Based Loop Heat Pipe

Book Chapter

Book NameAdvances in Clean Energy and Sustainability

PublisherSpringer

Author NameShah, S.N., Pithadiya, F.A., Jain, S.V.

Page Number165-175

Chapter TitleEffects of Ambient Condition on the Performance of Ammonia Based Loop Heat Pipe

Published YearMay 2023

ISSN/ISBN No978-981-99-2279-6

Parametric study on axially grooved heat pipe with two heat sources and one heat sink with multiple branches

Journal

Journal NameJournal of Thermal Science and Engineering Applications

Title of PaperParametric study on axially grooved heat pipe with two heat sources and one heat sink with multiple branches

PublisherASME

Volume Number15(6)

Page Number061004

Published YearApril 2023

ISSN/ISBN No1948-5093

Indexed INScopus

Parametric study on ammonia-based loop heat pipe

Journal

Journal Name Heat Transfer Engineering

Title of PaperParametric study on ammonia-based loop heat pipe

PublisherTaylor & Francis

Volume Number44(19)

Page Number1775-1788

Published YearNovember 2022

Indexed INScopus

Experimental Investigations on Performance Analysis of a Wickless Thermosiphon Heat Pipe With Two Heat Sources and Multiple Branches

Journal

Journal NameJournal of Thermal Science and Engineering Applications

Title of PaperExperimental Investigations on Performance Analysis of a Wickless Thermosiphon Heat Pipe With Two Heat Sources and Multiple Branches

PublisherASME

Volume Number14

Page Number1-14

Published YearApril 2022

ISSN/ISBN No1948-5093

Indexed INScopus, Web of Science

Abstract

In an electronic circuit of laptops, supercomputers with multiple CPUs, spacecraft etc. it is required to arrange the cooling system for multiple heat loads in the smallest possible space in view of power saving opportunities. In the present study, the experimental investigations are carried out on a wickless multi-branch heat pipe in gravity assisted mode with two evaporators and one condenser on each of the individual branches. The start-up and dynamic characteristics were studied with different filling ratios (range: 40 - 70%), with equal heat loads (range: 0-200 W) and unequal heat loads (range: 0 -100 W) on evaporators. The results are analysed in terms of temperature variation in axial direction, thermal resistance and heat transfer coefficient for a multi-branch thermosiphon heat pipe (MBTHP). It was found that the optimal filling ratio depends on the applied heat load under tested condition. In a thermosiphon mode, the heat pipe was capable of transporting maximum heat load of 210 W and maximum heat flux of 20.31 W/cm 2 with the maximum evaporator temperature lower than 100 °C. The minimum wickless thermal resistance of heat pipe was found to be 0.21 °C/W at 50% filling ratio and 160 W and maximum total heat transfer co-efficient was found as 6.33 k W/m2 °C.

Aerodynamic analysis of aircraft model using indigenously developed wind tunnel facility

Conference

Title of PaperAerodynamic analysis of aircraft model using indigenously developed wind tunnel facility

Proceeding NameProceedings of the International Conference on Recent Advances in Mechanical Engineering and Nanomaterials

Author NameD Makhija, S V Jain, A M Achari, K Ghosh

Page Number1-13

Published YearOctober 2021

Design and analysis of smoke flow visualization apparatus for wind tunnel

Conference

Title of PaperDesign and analysis of smoke flow visualization apparatus for wind tunnel

Proceeding NameProceedings of the International Conference on Recent Advances in Mechanical Engineering and Nanomaterials

Author NameD Raval, S V Jain, A M Achari1, K Ghosh

Page Number1-8

Published YearOctober 2021

Numerical Simulations of Natural Convection in a Finned Cylinder

Conference

Title of PaperNumerical Simulations of Natural Convection in a Finned Cylinder

Proceeding NameThird International Conference on Computing in Mechanical Engineering (Sponsored by AICTE)

Author NameSatyajeet S Suryawanshi, Sopan H Dehade, Sanjay V Jain, A Madhusudan Achari

OrganizationDepartment of Mechanical Engineering, SCMS School of Engineering and Technology, Kerala

Year , VenueSeptember 2021 , Kerala

Page Number1-6

Thermo-hydraulic performance analysis of a solar air heater roughened with discrete reverse NACA profile ribs

Journal

Journal NameInternational Journal of Thermal Sciences

Title of PaperThermo-hydraulic performance analysis of a solar air heater roughened with discrete reverse NACA profile ribs

PublisherElsevier Publication

Volume Number167

Page Number107026

Published YearSeptember 2021

ISSN/ISBN No1290-0729

Indexed INScopus, Web of Science

Parametric studies on interacting parameters influencing heat pipe performance

Journal

Journal NameProc IMechE Part A: J Power and Energy

Title of PaperParametric studies on interacting parameters influencing heat pipe performance

PublisherSAGE Publication

Volume Number235

Page Number594-607

Published YearAugust 2020

ISSN/ISBN No2041-2967

Indexed INScopus, Web of Science

Thermo-hydraulic performance analysis of a solar air heater roughened with reverse NACA profile ribs

Journal

Journal NameApplied Thermal Engineering

Title of PaperThermo-hydraulic performance analysis of a solar air heater roughened with reverse NACA profile ribs

PublisherElsevier Publication

Volume Number170

Page Number114940

Published YearApril 2020

ISSN/ISBN No1359-4311

Indexed INScopus, Web of Science

Performance enhancement of solar air heater by artificial roughness: an experimental and numerical approach

Conference

Title of PaperPerformance enhancement of solar air heater by artificial roughness: an experimental and numerical approach

Proceeding NameProceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019)

Author NameYogesh Patel, Ashutoshkumar Jha, Sanjay Jain, Vikas J Lakhera

OrganizationIIT roorkee

Year , VenueDecember 2019 , IIT roorkee

Page Number1-6

Silt erosion effects on pump running in turbine mode

Conference

Title of PaperSilt erosion effects on pump running in turbine mode

Proceeding NameNational Conference on Recent Developments in Mechanical Engineering

Author NameTandel R, Makhania BP, Jain SV, Patel RN

OrganizationM.E.S. College of Engineering, Pune

Page Number1-6

Published YearJanuary 2019

Numerical Investigations on High Voltage Circuit Breaker

Book Chapter

Book NameTechnology Drivers: Engine for Growth

PublisherTaylor & Francis Group, London

Author NameKumar P, Jain SV.

Chapter TitleNumerical Investigations on High Voltage Circuit Breaker

Published YearJanuary 2018

ISSN/ISBN No978-1-138-56042-0

Design and Analysis of Centrifugal Compressor

Book Chapter

Book NameTechnology Drivers: Engine for Growth

PublisherTaylor & Francis Group, London

Author NameDave S, Shukla S, Jain SV.

Chapter TitleDesign and Analysis of Centrifugal Compressor

Published YearJanuary 2018

ISSN/ISBN No978-1-138-56042-0

Numerical Investigations on High Voltage Circuit Breaker

Conference

Title of PaperNumerical Investigations on High Voltage Circuit Breaker

Proceeding NameNirma University International Conference

Author NameKumar P, Jain SV

OrganizationNirma University

Page Number1-6

Published YearNovember 2017

Design and Analysis of Centrifugal Compressor

Conference

Title of PaperDesign and Analysis of Centrifugal Compressor

Proceeding Name6th Nirma University International Conference

Author NameDave S, Shukla S, Jain SV

OrganizationNirma University

Year , VenueNovember 2017 , Ahmedabad

Page Number1-6

Experimental investigations on cavitation characteristics of pump running in turbine mode

Journal

Journal NameJournal of Energy Engineering

Title of PaperExperimental investigations on cavitation characteristics of pump running in turbine mode

PublisherASCE

Volume Number143

Published YearJune 2017

Indexed INScopus, Web of Science

Internal flow analysis of radial flow submersible pump

Conference

Title of PaperInternal flow analysis of radial flow submersible pump

Proceeding Name6th International and 43rd National Conference on Fluid Mechanics and Fluid Power

Author NameKumar A, Senva A, Jain SV

OrganizationMNNIT, Allahabad

Year , VenueDecember 2016 , MNNIT, Allahabad

Page Number1-3

Design optimization of shell and tube heat exchanger

Conference

Title of PaperDesign optimization of shell and tube heat exchanger

Proceeding Name6th International and 43rd National Conference on Fluid Mechanics and Fluid Power

Author NameShah B, Jain SV

OrganizationMNNIT, Allahabad

Year , VenueDecember 2016 , MNNIT, Allahabad

Page Number1-3

Cavitation analysis of pump running in turbine mode

Conference

Title of PaperCavitation analysis of pump running in turbine mode

Proceeding Name6th International and 43rd National Conference on Fluid Mechanics and Fluid Power

Author NameChauhan MR, Jain SV, Patel RN

OrganizationMNNIT, Allahabad

Year , VenueDecember 2016 , MNNIT, Allahabad

Page Number1-3

Numerical study and design modification of double suction centrifugal pump

Conference

Conference

Title of PaperDesign and analysis of heat pipe heat exchanger for stenter machine

Proceeding Name5th Nirma University International Conference on Engineering

Author NameMardhekar HV, Jain SV, Lakhera VJ, Patel RN

OrganizationNirma University, Ahmedabad

Year , VenueNovember 2015 , Nirma University, Ahmedabad

Page Number1-5

Performance enhancement of mixed flow submersible pump using CFD

Conference

Title of PaperPerformance enhancement of mixed flow submersible pump using CFD

Proceeding Name5th Nirma University International Conference on Engineering

Author NamePatel NC, Jain SV, Patel RN

OrganizationNirma University, Ahmedabad

Year , VenueNovember 2015 , Nirma University, Ahmedabad

Page Number1-5

Design improvement of radial flow submersible pump using CFD

Conference

Title of PaperDesign improvement of radial flow submersible pump using CFD

Proceeding Name5th Nirma University International Conference on Engineering

OrganizationNirma University, Ahmedabad

Year , VenueNovember 2015 , Nirma University, Ahmedabad

Page Number1-5

Experimental investigations and analysis on a concentrating solar collector using linear Fresnel lens

Conference

Title of PaperExperimental investigations and analysis on a concentrating solar collector using linear Fresnel lens

Proceeding Name5th Nirma University International Conference on Engineering

Author NameDheela NA, Shah BA, Jain SV

OrganizationNirma University, Ahmedabad

Year , VenueNovember 2015 , Nirma University, Ahmedabad

Page Number1-5

Cavitation detection in hydraulic machines: a Review

Journal

Journal NameInternational Journal on Theoretical and Applied Research in Mechanical Engineering

Title of PaperCavitation detection in hydraulic machines: a Review

Volume Number4

Page Number2319-3182

Published YearJanuary 2015

ISSN/ISBN No 2319-3182

Effects of impeller diameter and rotational speed on performance of pump running in turbine mode

Journal

Journal NameEnergy Conversion and Management

Title of PaperEffects of impeller diameter and rotational speed on performance of pump running in turbine mode

PublisherElsevier

Volume Number89

Page Number808-824

Published YearJanuary 2015

Indexed INScopus, Web of Science

Numerical investigations on centrifugal pump in pump and turbine modes

Conference

Title of PaperNumerical investigations on centrifugal pump in pump and turbine modes

Proceeding Name5th International and 41st National Conference on Fluid Mechanics and Fluid Power

Author NameChauhan M, Patel N, Jain S, Patel R

OrganizationIIT, Kanpur

Year , VenueNovember 2014 , IIT, Kanpur

Page Number1-8

Experimental investigations on pump running in turbine mode with different draft tubes

Conference

Title of PaperExperimental investigations on pump running in turbine mode with different draft tubes

Proceeding Name5th International and 41st National Conference on Fluid Mechanics and Fluid Power

Author NamePatel N, Chauhan M, Jain S, Patel R

OrganizationIIT, Kanpur

Year , VenueNovember 2014 , IIT, Kanpur

Page Number1-9

Design optimization of heat recovery unit for stenter machine using CFD

Conference

Title of PaperDesign optimization of heat recovery unit for stenter machine using CFD

Proceeding Name5th International and 41st National Conference on Fluid Mechanics and Fluid Power

Author NamePanchal P, Bakliwal A, Lakhera V, Patel R, Jain S

OrganizationIIT, Kanpur

Year , VenueNovember 2014 , IIT, Kanpur

Page Number1-8

Testing of rigid cellular thermal insulation as per Indian Standards

Journal

Journal NameInternational Journal of Mechanical and Industrial Engineering

Title of PaperTesting of rigid cellular thermal insulation as per Indian Standards

Volume Number3

Published YearApril 2014

ISSN/ISBN No2231-6477

Indexed INScopus

Investigations on pump running in turbine mode: a review of the state-of-the-Art

Journal

Journal NameRenewable and Sustainable Energy Reviews

Title of PaperInvestigations on pump running in turbine mode: a review of the state-of-the-Art

PublisherElsevier Publication

Volume Number30

Page Number841-868

Published YearJanuary 2014

ISSN/ISBN No1364-0321

Indexed INScopus, Web of Science

Performance characteristics and internal flow analysis of centrifugal pump

Conference

Title of PaperPerformance characteristics and internal flow analysis of centrifugal pump

Proceeding Name4th Nirma University International Conference

Author NameJogi RJ, Jain SV, Patel RN

OrganizationNirma University, Ahmedabad

Year , VenueNovember 2013 , Nirma University, Ahmedabad

Page Number1-6

Development and experimental investigations on multi-blade vertical axis Savonius wind turbine

Conference

Title of PaperDevelopment and experimental investigations on multi-blade vertical axis Savonius wind turbine

Proceeding Name4th Nirma University International Conference

Author NameSavaliya KJ, Jain SV, Shah BA

OrganizationNirma University, Ahmedabad

Year , VenueNovember 2013 , Nirma University, Ahmedabad

Page Number1-6

Numerical optimization of guide vanes and reducer in pump running in turbine mode

Journal

Journal NameJournal of Procedia Engineering

Title of PaperNumerical optimization of guide vanes and reducer in pump running in turbine mode

PublisherElsevier Publication

Volume Number51

Page Number797-802

Published YearJanuary 2013

ISSN/ISBN No1877-7058

Indexed INWeb of Science

Cost analysis of pump as turbine for pico hydropower plants – a case study

Journal

Journal NameJournal of Procedia Engineering

Title of PaperCost analysis of pump as turbine for pico hydropower plants – a case study

PublisherElsevier Publication

Volume Number51

Page Number721-726

Published YearJanuary 2013

ISSN/ISBN No1877-7058

Indexed INWeb of Science

CFD for centrifugal pumps: a review of the state-of-the-art

Journal

Journal NameJournal of Procedia Engineering

Title of PaperCFD for centrifugal pumps: a review of the state-of-the-art

PublisherElsevier Publication

Volume Number51

Page Number715-720

Published YearJanuary 2013

ISSN/ISBN No1877-7058

Indexed INWeb of Science

Solar parabolic trough collector and their applications

Conference

Title of PaperSolar parabolic trough collector and their applications

Proceeding NameInternational Conference on Information, Knowledge & Research in Engineering, Technology & Sciences

Author NameJain SV, Jha MS, Raghavan S

OrganizationG. K. Bharad Institute of Engineering, Rajkot, Gujarat

Year , VenueDecember 2012 , G. K. Bharad Institute of Engineering, Rajkot, Gujarat

Page Number713-718

Design and testing of parabolic solar collector

Conference

Title of PaperDesign and testing of parabolic solar collector

Proceeding NameInternational Conference on Advances in Mechanical Engineering

Author NameModi J, Prajapati K, Ramanuj V, Shah BA, Jain SV

OrganizationSVNIT, Surat

Year , VenueJune 2011 , SVNIT, Surat

Page Number1-5

Numerical investigation of boundary layer control over an airfoil

Conference

Title of PaperNumerical investigation of boundary layer control over an airfoil

Proceeding NameInternational Conference on Current Trends in Technology

Author NameShaikh T, Lakdawala AM, Shah NK, Jain SV

OrganizationNirma University, Ahmedabad

Year , VenueDecember 2010 , Nirma University, Ahmedabad

Page Number1-7

CFD approach for prediction of efficiency of Francis turbine

Conference

Title of PaperCFD approach for prediction of efficiency of Francis turbine

Proceeding NameThe 8th International Conference on Hydraulic Efficiency Measurements

Author NameJain SV, Saini RP, Kumar A

OrganizationIIT roorkee

Year , VenueOctober 2010 , IIT roorkee

Page Number1-7

Establishing relation between pressure and normal shock in convergent-divergent nozzle – a review

Journal

Journal NameInstitute Journal of Nirma University

Title of PaperEstablishing relation between pressure and normal shock in convergent-divergent nozzle – a review

Volume Number1

Page Number1-5

Published YearJanuary 2010

CFD approach for flow investigations in hydraulic reaction turbines – A review

Conference

Title of PaperCFD approach for flow investigations in hydraulic reaction turbines – A review

Proceeding NameNational Conference on Innovations in Mechatronics Engineering

Author NameJain SV, Saini RP, Kumar A

OrganizationGCET, VV Nagar

Year , VenueDecember 2009 , GCET, VV Nagar

Page Number102-106

A review on pump as turbine for micro hydropower plants

Conference

Title of PaperA review on pump as turbine for micro hydropower plants

Proceeding NameNational Conference on Current Trends in Technology

Author NamePatel V, Jain SV, Patel RN

OrganizationNirma University

Year , VenueDecember 2009 , Nirma University, Ahmedabad

Page Number51-56

A Novel design of octagonal line focusing solar collector

Conference

Title of PaperA Novel design of octagonal line focusing solar collector

Proceeding NameInternational conference on Advances in Energy Research

Author NameJain SV, Bhatt NM, Lakhera VJ

OrganizationIIT Bombay

Year , VenueOctober 2009 , IIT Bombay

Page Number1-6

Design of water conductor system for ultra low head hydropower project – A case study

Conference

Title of PaperDesign of water conductor system for ultra low head hydropower project – A case study

Proceeding NameInternational Conference on Advances in Mechanical Engineering

Author NameJain SV, Singal SK

OrganizationSVNIT, Surat

Year , VenueAugust 2009 , SVNIT, Surat

Page Number381-385

CFD based flow analysis of Francis turbine

Conference

Title of PaperCFD based flow analysis of Francis turbine

Proceeding NameInternational Conference on Energy Engineering

Author NameJain SV, Saini RP, Kumar A

OrganizationPondicherry Engineering College, Puducherry

Year , VenueJanuary 2009 , Pondicherry Engineering College, Puducherry

Page Number1-6

Investigations and development of small hydropower project in Gujarat – A case study

Conference

Title of PaperInvestigations and development of small hydropower project in Gujarat – A case study

Proceeding NameInternational Conference on Advances in Mechanical Engineering

Author NameJain SV, Singal SK

OrganizationSVNIT, Surat

Year , VenueDecember 2008 , SVNIT, Surat

Page Number1-6

Small hydropower – An Indian perspective

Conference

Title of PaperSmall hydropower – An Indian perspective

Proceeding NameProceedings of National Conference on Current Trends in Technology

Author NameJain SV

OrganizationNirma University, Ahmedabad

Year , VenueNovember 2008 , Nirma University, Ahmedabad

Page Number1-5

Planning of canal based small hydro power scheme

Journal

Journal NameIEEMA Journal

Title of PaperPlanning of canal based small hydro power scheme

Page Number90-96

Published YearJanuary 2008

Review of flow analysis of hydro turbines using computational fluid dynamics

Conference

Title of PaperReview of flow analysis of hydro turbines using computational fluid dynamics

Proceeding NameProceedings of National Conference on Current Trends in Technology

Author NameJain SV, Saini RP, Kumar A

OrganizationNirma University, Ahmedabad

Year , VenueDecember 2007 , Nirma University, Ahmedabad

Page Number1-6

Saumil Desai

Implications of vibration characteristics towards mass detection using graphene nanoribbon-based bridge configured mass sensor

Journal

Journal NameSensors and Actuators A: Physical

Title of PaperImplications of vibration characteristics towards mass detection using graphene nanoribbon-based bridge configured mass sensor

PublisherElsevier

Volume Number376

Page Number115509

Published YearJune 2024

ISSN/ISBN No1873-3069

Indexed INScopus, Web of Science

To investigate the electrical/thermal characteristics of doped zig-zag graphene nano-ribbon under thermal variation

Conference

Title of PaperTo investigate the electrical/thermal characteristics of doped zig-zag graphene nano-ribbon under thermal variation

Author NameSaumil Desai, Ankur Pandya, Vipul Bhojawala

OrganizationDepartment of Physics under Department of Electronics and Communication Engineering, Institute of Technology, Nirma University

Year , VenueMarch 2024 , Nirma University, Ahmedabad

Theoretical modelling of graphene system for nano-electromechanical resonator and force sensor

Journal

Journal NamePhysica E: Low-dimensional Systems and Nanostructures

Title of PaperTheoretical modelling of graphene system for nano-electromechanical resonator and force sensor

PublisherElsevier

Volume Number147

Page Number115606

Published YearMarch 2023

ISSN/ISBN No1873-1759

Indexed INScopus, Web of Science

To investigate the electrical properties of boron nitride nanosheet under tensile loading effect

Journal

Journal NameMaterials Today: Proceedings

Title of PaperTo investigate the electrical properties of boron nitride nanosheet under tensile loading effect

PublisherElsevier

Published YearJuly 2022

ISSN/ISBN No2214-7853

Indexed INScopus

A theoretical investigation on germanene/graphene composite pressure sensor under pre-stressed condition

Journal

Journal NamePhysica E: Low-dimensional Systems and Nanostructures

Title of PaperA theoretical investigation on germanene/graphene composite pressure sensor under pre-stressed condition

PublisherElsevier

Volume Number142

Page Number115308

Published YearMay 2022

ISSN/ISBN No1386-9477

Indexed INScopus, Web of Science

Design of Hydraulic Biomass Briquette Machine

Journal

Journal NameIOP Conference Series: Materials Science and Engineering

Title of PaperDesign of Hydraulic Biomass Briquette Machine

PublisherIOP Publishing

Volume Number1258(1)

Page Number012040

Published YearApril 2022

ISSN/ISBN No1757-899X

Effect of longitudinal parameter on the vibration Characteristics of Boron nitride nanotube

Conference

Title of PaperEffect of longitudinal parameter on the vibration Characteristics of Boron nitride nanotube

Author NameSaumil Desai, Ankur Pandya, Vipul Bhojawala, Dhaval Patel

OrganizationIndian Institute of Chemical Engineers, India

Year , VenueApril 2022 , Heritage Institute of Technology, Kolkata

Effects of stacking sequences and longitudinal parameter on the dynamic characteristics of multilayer glass epoxy composite

Journal

Journal NameIOP Conference Series: Materials Science and Engineering

Title of PaperEffects of stacking sequences and longitudinal parameter on the dynamic characteristics of multilayer glass epoxy composite

PublisherIOP Publishing

Volume Number1228

Page Number012016 (1-10)

Published YearMarch 2022

ISSN/ISBN No1757-899X

Indexed INWeb of Science

Effect of longitudinal parameter on the vibration characteristics of unidirectional monolayer glass epoxy composite

Journal

Journal NameMaterials Today: Proceedings

Title of PaperEffect of longitudinal parameter on the vibration characteristics of unidirectional monolayer glass epoxy composite

PublisherElsevier

Volume Number59

Page Number683-691

Published YearJanuary 2022

ISSN/ISBN No2214-7853

Indexed INScopus

Vibration Characteristics of Graphene nano resonator as mass sensor

Journal

Journal Name Journal of Physics: Conference Series

Title of PaperVibration Characteristics of Graphene nano resonator as mass sensor

Publisher IOP Publishing Ltd

Volume Number1854

Page Number012029 (1-10)

Published YearApril 2021

ISSN/ISBN No1742-6596

Indexed INScopus

Size-Dependent Natural Frequency Variation Analysis of Single-Layer Graphene Sheet

Book Chapter

Book NameAdvances in Engineering Design

PublisherSpringer, Singapore

Author NameHarshad Patel,Saumil Desai, Mitesh B. Panchal

Page Number1-10

Chapter TitleSize-Dependent Natural Frequency Variation Analysis of Single-Layer Graphene Sheet

Published YearApril 2021

ISSN/ISBN No978-981-33-4684-0

Indexed INScopus

Vibrational Characterization of Graphene Nano-ribbon Resonator

Book Chapter

Book NameAdvances in Engineering Materials

PublisherSpringer, Singapore

Author NameSaumil Desai, Ankur Pandya, Mitesh Panchal

Page Number207-217

Chapter TitleVibrational Characterization of Graphene Nano-ribbon Resonator

Published YearApril 2021

ISSN/ISBN No978-981-33-6029-7

Indexed INScopus

Effect of length variation on vibration characteristics of boron nitride nano-ribbon resonator

Conference

Title of PaperEffect of length variation on vibration characteristics of boron nitride nano-ribbon resonator

Author NameSaumil Desai, Ankur Pandya, Mitesh Panchal

OrganizationAmity School of Engineering and Technology, Amity University, Uttar Pradesh

Year , VenueMarch 2021 , Lucknow

Effect of built-in tension due to variation in temperature on natural frequency of graphene nano ribbon resonator

Journal

Journal NameMaterials Today: Proceedings

Title of PaperEffect of built-in tension due to variation in temperature on natural frequency of graphene nano ribbon resonator

PublisherElsevier

Volume Number47

Page Number686-690

Published YearJanuary 2021

ISSN/ISBN No2214-7853

Indexed INScopus

Design and Modelling of Dual faceplate Centrifugal casting equipment for manufacturing of turbine bearing

Book Chapter

Book NameCAD/CAM, Robotics and Factories of the Future

PublisherSpringer, New Delhi

Author NameSaumil Desai, Saurin Sheth, Purvi Chauhan

Page Number523-534

Chapter TitleDesign and Modelling of Dual faceplate Centrifugal casting equipment for manufacturing of turbine bearing

Published YearJanuary 2016

ISSN/ISBN No978-81-322-2740-3

Indexed INScopus

Study and Proposed Design of Centrifugal Casting Machine for manufacturing of Turbine Bearing

Conference

Title of PaperStudy and Proposed Design of Centrifugal Casting Machine for manufacturing of Turbine Bearing

Proceeding NameJournal of Material Science and Mechanical Engineering (JMSME)

PublisherKrishi Sanskriti Publishers

Author NameSaumil Desai, Saurin Sheth

Organization Jawaharlala Nehru University

Year , VenueFebruary 2015 , Jawaharlala Nehru University, New Delhi

Page Number 34-37

ISSN/ISBN No2393-9109

Proposed Design of Centrifugal Casting Machine For Manufacturing Of Turbine Bearing

Conference

Title of PaperProposed Design of Centrifugal Casting Machine For Manufacturing Of Turbine Bearing

PublisherNational Conference on Advances and Challenges in Engineering and Science-2012, L.C.I.T.- Bhandu

OrganizationL. C. Institute of Technology, Bhandu

Year , VenueApril 2012 , L. C. Institute of Technology, Bhandu, Ta. Visnagar, Di. Mehsana

Abstract

Shashikant Joshi

Design and Development ol' Welding Fixture on Release Welding Machine

Conference

Title of PaperDesign and Development ol' Welding Fixture on Release Welding Machine

Proceeding NameICFAMMT 2024

OrganizationIITRAM Ahmedabad

Year , VenueJanuary 2024 , IITRAM Ahmedabad

Indexed INScopus

Tape spring for deployable space structures: A review

Journal

Journal NameAdvances in Space Research

Title of PaperTape spring for deployable space structures: A review

PublisherElsevier

Published YearJanuary 2024

Indexed INScopus

Design and oer[iopment of Experir,enral ]9s1 nig for Fatigue Life Estimation of bne-Way Power Transmission ilutch

Conference

Title of PaperDesign and oer[iopment of Experir,enral ]9s1 nig for Fatigue Life Estimation of bne-Way Power Transmission ilutch

Proceeding NameAIAMMS -2023

Published YearNovember 2023

Indexed INScopus

Developments in 3D Printing of Carbon Fiber Reinforced Polymer Containing Recycled Plastic Waste: A Review

Journal

Journal NameCleaner Materials

Title of PaperDevelopments in 3D Printing of Carbon Fiber Reinforced Polymer Containing Recycled Plastic Waste: A Review

Volume Number9

Published YearSeptember 2023

ISSN/ISBN No2772-3976

Indexed INScopus, Web of Science

Finite element simulation of additive manufacturing process of carbon allotropes

Journal

Journal NameInternational Journal on Interactive Design and Manufacturing

Title of PaperFinite element simulation of additive manufacturing process of carbon allotropes

Published YearMarch 2023

ISSN/ISBN No1955-2505

Indexed INScopus, Web of Science

Finite element simulation of additive manufacturing process of carbon allotropes

Journal

Journal NameInternational Journal of Interactive Design and Manufacturing

Title of PaperFinite element simulation of additive manufacturing process of carbon allotropes

PublisherSpringer

Published YearFebruary 2023

Indexed INScopus

Investigation of process parameters on flexural properties for CFRP composites

Journal

Journal NameMaterials Today

Title of PaperInvestigation of process parameters on flexural properties for CFRP composites

PublisherElsevier

Published YearJanuary 2023

Indexed INScopus

Development and performance analysis of out-of-autoclave curing process for CFRP composites

Journal

Journal NameAdvances in Materials and Processing Technologies

Title of PaperDevelopment and performance analysis of out-of-autoclave curing process for CFRP composites

Published YearJune 2022

Indexed INScopus

A New Comprehensive Methodology for Evaluation of Course Outcomes and Programme Outcomes

Journal

Journal NameJournal of Engineering Education Transformations

Title of PaperA New Comprehensive Methodology for Evaluation of Course Outcomes and Programme Outcomes

Volume Number36

Page Number95-103

Published YearMay 2022

Indexed INScopus

Experimental investigations of process parameters on mechanical properties for PLA during processing in FDM

Journal

Journal NameMaterials Today

Title of PaperExperimental investigations of process parameters on mechanical properties for PLA during processing in FDM

Published YearMay 2021

Indexed INScopus

Parametric study on process parameters of FDM 3D printer for thermoplastic materials

Journal

Journal NameMaterials Today

Title of PaperParametric study on process parameters of FDM 3D printer for thermoplastic materials

Published YearJanuary 2021

Title of PaperStructural Analysis of CFRP Layered Laminate under Bi-Axial Loading

PublisherTrans Tech Publications

Volume Number867

Published YearJanuary 2017

ISSN/ISBN No1662-7482

Indexed INScopus

Conference

Title of PaperPrediction of Spring-in Deformation for L-Shaped CFRP Components

PublisherICCMS - 2016, IIT Bombay

Published YearJanuary 2016

Design and Analysis of Clamp Cylinder for Capacity Augmentation of Injection Moulding Machine

Conference

Title of PaperDesign and Analysis of Clamp Cylinder for Capacity Augmentation of Injection Moulding Machine

PublisherICETME - 2016

Published YearJanuary 2016

Structural Analysis of CFRP Layered Laminate under Bi-axial loading

Conference

Title of PaperStructural Analysis of CFRP Layered Laminate under Bi-axial loading

PublisherTAMMIE-2016

Published YearJanuary 2016

ISSN/ISBN No978-93-85477-74-4

Design and Analysis of Gating and Risering System for Casting of Ball Valves

Journal

Journal NameNirma University of Engineering and Technology

Title of PaperDesign and Analysis of Gating and Risering System for Casting of Ball Valves

Volume Number4

Page Number1-5

Published YearJanuary 2015

Theoretical Design and CFD Analysis of Cyclonic Separator for Sinter Plant

Conference

Title of PaperTheoretical Design and CFD Analysis of Cyclonic Separator for Sinter Plant

PublisherICIE-2015, SVNIT, Surat

Published YearJanuary 2015

ISSN/ISBN No978-93-84935-56-6

Design and FE Analysis of Components of Bi-Drum Boiler

Conference

Title of PaperDesign and FE Analysis of Components of Bi-Drum Boiler

PublisherNUiCONE-2015

Published YearJanuary 2015

ISSN/ISBN No 978-1-138-02845-6

Chronological Design and Optimization of Modular Assembly Tool for Fabrication of Large Size Pressure Vessel

Conference

Title of PaperChronological Design and Optimization of Modular Assembly Tool for Fabrication of Large Size Pressure Vessel

PublisherNUiCONE-2015

Published YearJanuary 2015

ISSN/ISBN No978-1-138-02845-6

Stress intensity factors for an inclined and / or eccentric crack in a finite orthotropic lamina

Journal

Journal NameLatin American Journal of Solids and Structures

Title of PaperStress intensity factors for an inclined and / or eccentric crack in a finite orthotropic lamina

PublisherLatin American Journal of Solids and Struxctures

Volume Number11

Page Number1886-1904

Published YearJanuary 2014

Indexed INScopus

Determination of Deformation of Glass Epoxy Plate under Uniformly Distributed Loading Condition

Conference

Title of PaperDetermination of Deformation of Glass Epoxy Plate under Uniformly Distributed Loading Condition

PublisherASM MET-2014

Published YearJanuary 2014

Interaction of two cracks in an orthotropic lamina subjected to uniaxial loading

Journal

Journal NameEmerald Insight

Title of PaperInteraction of two cracks in an orthotropic lamina subjected to uniaxial loading

PublisherEmerald Insight

Volume Number4

Page Number206-218

Published YearJanuary 2013

ISSN/ISBN No1757-9864

Indexed INScopus

Pressure Vessel Design against Wind and Seismic Load

Conference

Title of PaperPressure Vessel Design against Wind and Seismic Load

Published YearJanuary 2013

Design and Analysis of rotor system for axial compressor

Conference

Title of PaperDesign and Analysis of rotor system for axial compressor

Published YearJanuary 2013

Stress intensity factors for cracks emanating from a circular hole in a finite orthotropic lamina

Conference

Title of PaperStress intensity factors for cracks emanating from a circular hole in a finite orthotropic lamina

Published YearJanuary 2010

ISSN/ISBN No978-1-4673-0021-6

Aerodynamic Design of Monorail Train Nose

Conference

Title of PaperAerodynamic Design of Monorail Train Nose

Published YearJanuary 2010

Conference

Title of PaperAnalysis and Design of Pressure Vessels Made of Composite Materials and Subjected to Static and Fatigue Loading

Published YearJanuary 2008

Software Development for Calculation Of Stress Intensity Factor (SIF)

Conference

Title of PaperSoftware Development for Calculation Of Stress Intensity Factor (SIF)

Proceeding NameNUICONE 2007

PublisherAllied Publishers Pvt. Lt

OrganizationNirma University Ahmedabad

Published YearJanuary 2007

ISSN/ISBN NoISBN: 979-81-8424-261-3

Indexed INScopus, Others

Optimization of solar and battery-based hybrid renewable energy system augmented with bioenergy and hydro energy-based dispatchable source

Journal

Journal NameiScience

Title of PaperOptimization of solar and battery-based hybrid renewable energy system augmented with bioenergy and hydro energy-based dispatchable source

PublisherElsevier

Volume Number26

Page Number105821

Published YearJanuary 2023

ISSN/ISBN No2589-0042

Indexed INScopus, Web of Science

Abstract

The hybrid renewable energy system (HRES) can overcome the problem of the mismatch of supply of variable renewable energies and demand. The optimal sizing of the HRES methodology is implemented by employing the generalized reduced gradient (GRG) method. A case study of HRES with solar, bio, and hydro sources for tribal areas in a hilly region of India is demonstrated. Both the grid-connected scenario and the standalone scenario in island mode are simulated. The optimal LCOE of 0.106–0.053 $/kWh is achieved in standalone mode for 100%–70% reliability. The grid-connected scenario is simulated with two different rates of payment for the electric energy delivered to the grid and a range of grid purchase prices. The LCOE results to around 0.06 $/kWh for the prospective grid-connected mode cases. The sensitivity analysis and validation of the work are also performed.

Hybrid energy storage system for improved response time and long-term energy storage

Journal

Journal NameMaterials Today: Proceedings

Title of PaperHybrid energy storage system for improved response time and long-term energy storage

PublisherElsevier

Volume Number67

Page Number238-244

Published YearJuly 2022

ISSN/ISBN No2214-7853

Indexed INScopus

A review of artificial intelligence applied for the solution of issues in the extensive adaption of solar and wind energy

Journal

Journal NameInternational Journal of Ambient Energy

Title of PaperA review of artificial intelligence applied for the solution of issues in the extensive adaption of solar and wind energy

PublisherTaylor & Francis

Page Number1–65

Published YearMay 2022

ISSN/ISBN No0143-0750

Optimum Sizing of Photovoltaic Battery System

Conference

Title of PaperOptimum Sizing of Photovoltaic Battery System

Proceeding NameTHERMAL FLUID-SCIENCE AND TRIBOLOGY APPLICATIONS (TFSTA-2016)

PublisherSardar Vallabhbhai National Institute of Technology Surat

Author NameAbhishek Sharma, Shebaz A Memon, Rajesh N Patel

OrganizationSardar Vallabhbhai National Institute of Technology Surat

Year , VenueMay 2016 , Sardar Vallabhbhai National Institute of Technology Surat

Page Number84-89

ISSN/ISBN No978-93-5265-440-6

Indexed INOthers

Shruti Bhatt

3D Multiphysics simulation of microwave heating of bulk metals with parametric variations

Journal

Journal NameChemical Engineering and Processing-Process Intensification

Title of Paper3D Multiphysics simulation of microwave heating of bulk metals with parametric variations

PublisherElsevier

Volume Number184

Page Number109271

Published YearFebruary 2023

Indexed INScopus, Web of Science

Review on effect of tooling parameters on microwave processing of metallic materials with special emphasis on melting/casting application

Journal

Journal NameInternational Journal of Metalcasting

Title of PaperReview on effect of tooling parameters on microwave processing of metallic materials with special emphasis on melting/casting application

PublisherSpringer

Published YearJanuary 2022

Indexed INScopus

Multiphysics simulation and validation of microwave melting characteristics of AA6061 by finite element analysis

Journal

Journal NameAdvances in Materials and Processing Technologies

Title of PaperMultiphysics simulation and validation of microwave melting characteristics of AA6061 by finite element analysis

Published YearJune 2021

Indexed INScopus

Experimental study on microwave ex-situ casting of AA 6061

Conference

Title of PaperExperimental study on microwave ex-situ casting of AA 6061

Proceeding NameMaterials Today: Proceedings

PublisherElsevier

Author NameShruti Bhatt, Shivansh Suthar, Dhruv Mistry, Nilesh Ghetiya

OrganizationICMPC 2021

Year , VenueJanuary 2021 , IIT-Indore

Page Number1312-1315

Indexed INScopus

Feasibility study on microwave melting of lead metal using 2.45 GHz microwave frequency

Conference

Title of PaperFeasibility study on microwave melting of lead metal using 2.45 GHz microwave frequency

Proceeding NameAIP Conference Proceedings

PublisherAIP Publishing

Author NameShruti Bhatt, Shivansh Suthar, Dhruv Mistry, Nilesh Ghetiya

Year , VenueMay 2020 , Tamilnadu

Indexed INScopus

Experimental study on effect of susceptor and separator materials on microwave melting of lead metal

Conference

Title of PaperExperimental study on effect of susceptor and separator materials on microwave melting of lead metal

Proceeding NameMaterials Today: Proceedings

PublisherElsevier

Author NameShruti Bhatt, Shivansh Suthar, Dhruv Mistry, Nilesh Ghetiya

OrganizationICMPC 2020

Year , VenueJanuary 2020 , GLS University, Mathura

Page Number3000-3002

Indexed INScopus

Design and simulation of hot coil marking machine

Conference

Title of PaperDesign and simulation of hot coil marking machine

Proceeding Name6th National Coference on Recent Adances in manufacturing

Author NameNirav Thakkar S N Mehta

OrganizationSVNIT, Surat

Year , VenueMay 2016 , SVNIT, Surat

Indexed INOthers

Review on Women in Engineering Education and Profession

Conference

Title of PaperReview on Women in Engineering Education and Profession

Proceeding NameInternational Conference on Women in Science and Technology: Creating Sustainable Career.

OrganizationB.V.M Engineering college, Vallabh Vidyanagar

Year , VenueJanuary 2016 , Vallabh Vidyanagar

Indexed INOthers

Estimation of Cutting Tool Wear in Turning Operation of FG-15 Cast Iron with Neuro-Fuzzy Approach

Conference

Title of PaperEstimation of Cutting Tool Wear in Turning Operation of FG-15 Cast Iron with Neuro-Fuzzy Approach

Proceeding Name17th ISME Conference

PublisherIIT Delhi

Author NameNaval Jaiswal Shruti Mehta Dr. K M Patel

OrganizationMechanical Engineering Department IIT Delhi

Year , VenueOctober 2015 , IIT Delhi

Indexed INOthers

Experimental study on electrical discharge machining of cobalt bonded tungsten carbides using graphite electrodes

Conference

Title of PaperExperimental study on electrical discharge machining of cobalt bonded tungsten carbides using graphite electrodes

Proceeding NameInternational Conference on multidisciplinary research and innovation

Year , VenueNovember 2014 , Ahmedabad Managment Association, ATIRA Campus

Indexed INOthers

An Experimental Investigation for Determination of Effects of Machining Parameters on Surface Roughness in EDM of WC-Co using Taguchi-Based Neural Network

Conference

Title of PaperAn Experimental Investigation for Determination of Effects of Machining Parameters on Surface Roughness in EDM of WC-Co using Taguchi-Based Neural Network

Proceeding Name4th Nirma University International Conference on Engineering

OrganizationInstitute of Techology Nirma University

Published YearNovember 2013

Indexed INOthers

Investigation of Optimum Process Parameters using Genetic Algorithm based Neural Networks during EDM of 64WC-9Co

Conference

Title of PaperInvestigation of Optimum Process Parameters using Genetic Algorithm based Neural Networks during EDM of 64WC-9Co

PublisherInternational reaserch publication house

Author NameS.N.Mehta

OrganizationKrishi Sanskriti

Year , VenueSeptember 2013 , Jawaharlal Nehru Uniersity, New Delhi

ISSN/ISBN No0974-3154

Indexed INOthers

An Experimental Investigation for Determination of Effects of Machining Parameters on Surface Roughness in EDM of WC-Co

Conference

Title of PaperAn Experimental Investigation for Determination of Effects of Machining Parameters on Surface Roughness in EDM of WC-Co

Proceeding NameInternational conference on advances in mechanical engineering

OrganizationMechanical Engineering Department SVNIT Surat

Year , VenueAugust 2009 , SVNIT, Surat

Indexed INOthers

Revolutionary methods for optimization of process parameters in electro-discharge machining

Conference

Title of PaperRevolutionary methods for optimization of process parameters in electro-discharge machining

Proceeding NameNational women's conference on exploring potentialities of women in engineering

Author NameS N Mehta

Year , VenueJuly 2009 , Charotar Institute of Technology Changa

Indexed INOthers

Tejas Raval

Development and Validation of the Lattice Boltzmann Method based Single-Phase Flow Solver

Conference

Title of PaperDevelopment and Validation of the Lattice Boltzmann Method based Single-Phase Flow Solver

Proceeding NameFMFP Conference Proceedings

PublisherSringer Nature

Author NameTejas Raval, Absar Lakdawala

OrganizationIIT, Jodhpur

Year , VenueDecember 2023 , IIT, Jodhpur

Page Number1-6

Indexed INScopus, Web of Science

Abstract

Lattice Boltzmann Method (LBM) is widely accepted for solving multi-phase fluid interaction applications. As it is mesoscale based method, doesn’t require to solve governing equations at every particle unlike to Molecular dynamics-based methods which will make it computationally lesser costlier. In addition, it is also taking care of the physical properties for both the fluids. LBM with multi-relaxation-time (MRT) model is having higher stability and accuracy and hence LBM with MRT based methodology is implemented in this work. LBM based multiphase fluid solver is developed, however in this work only single-phase benchmarking problems are solved in order to validate the proposed solver. 2-D Channel flow in backward facing step and 2-D channel flow over a square cylinder is solved and results are validated through available numerical and analytical solutions available. The Backward-facing step problem is simulated at R_e=800 while the flow over a square cylinder is simulated at two different Reynolds number as R_e=60 &100. Efforts are made to showcase the capabilities and benefits of LB based model in comparison of well-established Navier- stokes based solvers. Numerical results of the proposed work are in good matching with well-established NS based numerical and analytical solutions.

Conference

Title of PaperHeat Transfer Analysis of 2-Stage G-M Cryocooler at 4 K Steady State Temperature for the Determination of its Capacity

Proceeding NameInternational Journal of Scientific & Engineering Research

PublisherInternational Journal of Scientific & Engineering Research

Author NameAnand Bhatt, Tejas Raval, Nipun Raval

OrganizationSihgad Institute of Technology, Lonawala, Pune, Maharashtra

Year , VenueApril 2017 , Sihgad Institute of Technology, Lonawala, Pune, Maharashtra

Page Number17-20

ISSN/ISBN No2229-5518

Indexed INOthers

Abstract

A two stage Gifford-Mc Mahon Cryocoolers are used to produce ultra-low temperatures in the range of 4 K to 40 K in the cryogenics experimentations. Commercially available G-M Cryocoolers have wide range of cooling capacity. Heat transfer analysis has been carried out in the present study on the G-M Cryocooler at no load condition by considering experimental observations as input data. The rated capacity of the G-M Cryocooler is 1.5 W at 4 K temperature. By producing 4 K temperature on the cryocooler at no load condition, the same has been analysed by heat transfer approach. All the modes of heat transfer has been calculated at steady temperature of 4 K with steady vacuum level in the range of 10-5 Torr. The calculated capacity of the Cryocooler has been found near to the rated capacity of 1.5 W at 4 K. The same approach can be made useful to calculate the capacity of ultra-low temperature refrigeration systems.

A Review Paper on Redesigned Piston Rings to Improve Engine Performance

Conference

Conference

Title of PaperOptimization of auxiliary power consumption of a combine cycle power plant.

Proceeding NameProceedia Engineering

PublisherElsevier

OrganizationNirma University

Year , VenueDecember 2013 , Institute of Technology, Nirma University

Indexed INOthers

Abstract

Energy requirement increases day by day. Thermal power plants are the measure source of energy for electricity generation. They are also the measure polluter of the environment. In order to reduce environmental pollution either energy consumption should be reduced or energy should be generated with higher conversion efficiency. In thermal power plants part of energy generated by the plants is bein

Vikas Lakhera

Effect of Shape and Orientation of Flat Heat Pipe on Its Thermal Performance

Conference

Title of PaperPressure Drop Measurements Performed on a Cable in Conduit Conductor (CICC) at a New Facility Developed to Study Thermo-Hydraulic Characterization

PublisherIEEE

Volume NumberVolume 31, Issue 5

Page Number1-5

Published YearMarch 2021

ISSN/ISBN No1558-2515

Analysis of discontinuity stress at shell and elliptical head juncture using theory of beam on elastic foundation

Journal

Journal NameMaterial Today: Proceedings

Title of PaperAnalysis of discontinuity stress at shell and elliptical head juncture using theory of beam on elastic foundation

PublisherScience direct

Volume NumberIn press

Published YearJune 2023

ISSN/ISBN NoISSN: 2214-7853

Indexed INScopus

Book Chapter

Book NameRecent Advances in Manufacturing modelling and optimisation

PublisherSpringer

Author NameShailendra kumar and J Ramkumar

Page Number427-438

Chapter TitleEvaluation of alternate material of a bush for reducing fretting wear damage in a bush -pin joint

Published YearJanuary 2022

ISSN/ISBN No2195-4356

Indexed INScopus

Simplification of bearing fault diagnosis procedure using MATLAB APP designer tool

Conference

Title of PaperSimplification of bearing fault diagnosis procedure using MATLAB APP designer tool

Proceeding NameRecent Innovations in Mechanical Engineering

PublisherMechanical Engineering Studnet Association

Author NameV M Bhojawala

OrganizationNirma University

Year , VenueJune 2021 , Nirma University

Page Number31-35

ISSN/ISBN NoISBN: 978-93-5473-550-9

Indexed INOthers

Size identification on inner race spall in rolling element bearing operating under combined load using vibration signature analysis

Conference

Title of PaperSize identification on inner race spall in rolling element bearing operating under combined load using vibration signature analysis

Proceeding NameAgile and sustainable advances in equipment reliability

PublisherTata steel and Condition Monitoring Socirty of India

Author NameV M Bhojawala

OrganizationTata steel and Condition Monitoring Socirty of India

Year , VenueJanuary 2021 , Jamshedpur

Page Number45

Indexed INOthers

Investigation on Pull‑in Voltage, Frequency Tuning and Frequency Stability of MEMS Devices Incorporating Casimir Force with Correction for Finite Conductivity.

Journal

Journal NameJournal of Vibration Engineering & Technologies

Title of PaperInvestigation on Pull‑in Voltage, Frequency Tuning and Frequency Stability of MEMS Devices Incorporating Casimir Force with Correction for Finite Conductivity.

PublisherSpringer

Volume Number8

Page Number959-975

Published YearMarch 2020

ISSN/ISBN No2523-3939

Indexed INScopus

Identification of faulty condition of rolling element bearing with inner race defect using time and frequency domain parameters of vibration signature

Book Chapter

Book NameTechnology drivers; Engine for growth

PublisherTaylor and Francis group,London

Author NameDr. Bharat Modi, Dr. Alka Mahajan & Dr.Parul Patel

Page Number222-227

Chapter TitleIdentification of faulty condition of rolling element bearing with inner race defect using time and frequency domain parameters of vibration signature

Published YearJanuary 2019

ISSN/ISBN No978-1-138-56042-0

Indexed INOthers

Identification of faulty condition of rolling element bearing with outer race defect using time and frequency domain parameters of vibration signature

Book Chapter

Book NameTechnology drivers; Engine for growth

PublisherTaylor and Francis group,London

Author NameDr. Bharat Modi, Dr. Alka Mahajan & Dr.Parul Patel

Page Number215-220

Chapter TitleIdentification of faulty condition of rolling element bearing with outer race defect using time and frequency domain parameters of vibration signature

Published YearJanuary 2019

ISSN/ISBN No978-1-138-56042-0

Indexed INOthers

Closed-form solution for static pull-in voltage of electrostatically actuated clamped–clamped micro/nano beams under the effect of fringing field and van der Waals force

Journal

Journal NameMaterial Research Express

Title of PaperClosed-form solution for static pull-in voltage of electrostatically actuated clamped–clamped micro/nano beams under the effect of fringing field and van der Waals force

PublisherIOP

Volume Number4

Page Number126306(1-16)

Published YearDecember 2017

ISSN/ISBN No2053-1591

Indexed INScopus, UGC List

Closed-form relation to predict static pull-in voltage of an electrostatically actuated clamped–clamped microbeam under the effect of Casimir force

Journal

Journal NameActa Mechanica

Title of PaperClosed-form relation to predict static pull-in voltage of an electrostatically actuated clamped–clamped microbeam under the effect of Casimir force

PublisherSpringer

Volume Number228

Page Number2583-2602

Published YearJuly 2017

ISSN/ISBN No0001-5970

Indexed INScopus, UGC List

Effect of van der Waals force on pull-in voltage, frequency tuning and frequency stability of NEMS devices

Journal

Journal NameMicrosystem Technologies

Title of PaperEffect of van der Waals force on pull-in voltage, frequency tuning and frequency stability of NEMS devices

PublisherSpringer

Volume Number23

Page Number1255-1267

Published YearMay 2017

ISSN/ISBN No0946-7076

Indexed INScopus, UGC List

A comparative study and analysis for various arrangements of belleville washer mounting

Conference

Title of PaperA comparative study and analysis for various arrangements of belleville washer mounting

Proceeding Nameproceedings of the 6th international conference on " Advanced trends in Engineering, Technology and Research"

Author NameArjun Dadhaniya, Vipul Bhojawala

OrganizationBal Krishna Institute of Technology

Year , VenueJune 2016 , Bal Krishna Institute of Technology, Rajasthan

Page Number23-28

ISSN/ISBN No978-81-930823-2-4

Indexed INOthers

Analysis of U-bolt mounting structure in trailer

Conference

Title of PaperAnalysis of U-bolt mounting structure in trailer

Proceeding Nameproceedings of the 6th international conference on " Advanced trends in Engineering, Technology and Research"

Author NameArjun Dadhaniya, Vipul Bhojawala

OrganizationBal Krishna Institute of Technology

Year , VenueJune 2016 , Bal Krishna Institute of Technology, Rajasthan

Page Number19-22

ISSN/ISBN No978-81-930823-2-4

Indexed INOthers

Finite element analysis and optimization of truck trailer chassis frame

Conference

Title of PaperFinite element analysis and optimization of truck trailer chassis frame

Proceeding NameRecent Advances in Mechanical Engineering, ICRAME-2015

Author NameKunal Barhate, Prof. Vipul Manharlal Bhojawala, Prof. D V Patel

OrganizationSavitribai Phule Pune university

Year , VenueFebruary 2015 , Savitribai Phule Pune university

Page Number--

Indexed INOthers

Finite Element analysis of spur gear transmission error

Conference

Title of PaperFinite Element analysis of spur gear transmission error

Proceeding NameRecent Advances in Mechanical Engineering, ICRAME-2015

Author NameToshit Jain, Prof. D V Patel, Prof. Dhaval Vallabhbhai Patel

OrganizationSavitribai Phule Pune university

Year , VenueFebruary 2015 , Savitribai Phule Pune university

Page Number--

Indexed INOthers

Development of MRP software for clutch manufacturing unit using Excel VBA

Conference

Title of PaperDevelopment of MRP software for clutch manufacturing unit using Excel VBA

Proceeding NameRecent Advances in Mechanical Engineering, ICRAME-2015

Author NameSaddam husain M. Sabugar, Prof. Vipul Manharlal Bhojawala, Prof. Ashish Mulchand Gohil, Vivek Tiwari

OrganizationSavitribai Phule Pune university

Year , VenueFebruary 2015 , Savitribai Phule Pune university

Page Number--

Indexed INOthers

Design of bar peeling attachment on lathe machine

Conference

Title of PaperDesign of bar peeling attachment on lathe machine

Proceeding NameRecent Advances in Mechanical Engineering, ICRAME-2015

Author NameAnkur N Patel, Prof. V M Bhojawala, Prof. Dhaval Vallabhbhai Patel

OrganizationSavitribai Phule Pune university

Year , VenueJanuary 2015 , Savitribai Phule Pune university

Page Number--

Indexed INOthers

Seismic analysis of a motor operated gate valve for nuclear application using Finite Element Analysis

Conference

Title of PaperSeismic analysis of a motor operated gate valve for nuclear application using Finite Element Analysis

Proceeding NameInternational Conference on Innovative Advancements in Engineering and Technology, IAET - 2014

Author NameRavi pankhaniya, Prof. Dhaval Vallabhbhai Patel, Prof. Vipul Manharlal Bhojawala

OrganizationJaipur national university

Year , VenueJanuary 2014 , Jaipur national university

Indexed INOthers

Conference

Title of PaperVarious numerical analysis of composite leaf spring for light vehicle mini truck

Proceeding NameNirma University International conference on Engineering -2013

Author NameMehul Sorathiy, D B Shah, Prof. Vipul Manharlal Bhojawala

OrganizationInstitute of Technology, Nirma University

Year , VenueDecember 2013 , Institute of Technology, Nirma University

Page Number--

Indexed INOthers

Analysis of composite leaf spring using FEA for light vehicle mini truck

Conference

Title of PaperAnalysis of composite leaf spring using FEA for light vehicle mini truck

Proceeding NameInternational Conference on Research & Development in Engineering, Technology & Sciences, ICRD-ETS-2

Author NameMehul Sorathiya, Prof. D B Shah, Prof. V M Bhojawala

OrganizationG K Bharad Institute of Engineering, Rajkot

Year , VenueApril 2013 , G K Bharad Institute of Engineering, Rajkot

Page Number195-199

ISSN/ISBN No978-81-906220-8-0

Indexed INOthers

Software development for automated design and analysis for hook of EOT crane

Conference

Title of PaperSoftware development for automated design and analysis for hook of EOT crane

Proceeding NameInternational Conference on Innovations in Automation and Mechatronics Engineering, GCET- Vidyanagar

Author NameJ K Patel, Prof. Dhaval Vallabhbhai Patel, V M Bhojawala

OrganizationG. H. Patel College of Engineering & Technology, V. V. Nagar- 388120 , Gujarat, India

Year , VenueFebruary 2013 , G. H. Patel College of Engineering & Technology, V. V. Nagar- 388120 , Gujarat, India

Page Number155-159

Indexed INOthers

Conference

Title of PaperSoftware Development for automated designing and analysis of wire rope drum

Proceeding NameRecent Advances in Manufacuring, SVNIT, surat, RAM-2012

Author NameJ K Patel, Prof. Dhaval Vallabhbhai Patel, V M Bhojawala

OrganizationSardar Vallahbhai National Institute of Technology

Year , VenueJune 2012 , Sardar Vallahbhai National Institute of Technology, Surat

Page Number90-95

Indexed INOthers

Topology Optimization of a bed of vertical Machining center

Conference

Title of PaperTopology Optimization of a bed of vertical Machining center

Proceeding NameRecent Advances in Manufacuring, SVNIT, surat, RAM-2012

Author NameH A Lunagaria, Prof. D V Patel, Prof. Vipul Manharlal Bhojawala

OrganizationSardar Vallahbhai National Institute of Technology

Year , VenueJune 2012 , Sardar Vallahbhai National Institute of Technology, Surat

Page Number193-197

Indexed INOthers

Topology optimization of a column

Conference

Title of PaperTopology optimization of a column

Proceeding NameNational conference on technology frontiers of Mechanical Engineering, COMET 2012

Author NameH A Lunagaria, Prof. D V Patel, Prof. Vipul Manharlal Bhojawala

OrganizationSt. Josheph collage of engineering and technology, Palai

Year , VenueJune 2012 , St. Josheph collage of engineering and technology, Palai

Page Number39-43

Indexed INOthers

Design and development of coupled planetary gear train test rig

Conference

Title of PaperDesign and development of coupled planetary gear train test rig

Proceeding NameInternational Conference on Recent Advances in engineering, Technology and Management, SPICON - 2012

Author NameV M Bhojawala

OrganizationSardar Patel college of Engineering. Mumbai

Page Number--

Published YearMay 2012

Indexed INOthers

Identification of fault size of rolling element bearing on outer race from vibration signature analysis

Journal

Journal NameJournal of Physics.: Conference Series

Title of PaperIdentification of fault size of rolling element bearing on outer race from vibration signature analysis

PublisherIOP science

Volume Number1921

Page Number012087

Published YearMarch 2012

ISSN/ISBN No1742-6596

Indexed INScopus

Optimization of tablet press components

Conference

Title of PaperOptimization of tablet press components

Proceeding NameInretational Conference On Current Trends in Technology, Nirma University,NUiCONE-2011

Author NameV Rajput, D S Sharma, V M Bhojawala

OrganizationInstitute of Technology, Nirma University

Year , VenueDecember 2011 , Institute of Technology, Nirma University

Page Number1-6

Indexed INOthers

Dynamic modeling and simulation of coupled planetary gear trains test rig

Conference

Title of PaperDynamic modeling and simulation of coupled planetary gear trains test rig

Proceeding NameNational Conference On Current Trends in Technology, Nirma University-NUCONE-2009

Author NameV M Bhojawala

OrganizationInstitute of Technology, Nirma University

Year , VenueNovember 2009 , Institute of Technology, Nirma University

Page Number8-12

Indexed INOthers

Test rig for study of efficiency and power flow in coupled planetary gear train

Conference

Title of PaperTest rig for study of efficiency and power flow in coupled planetary gear train

Proceeding NameNational conference on design and manufacturing issues in automotive and allied industries

OrganizationIIT Madras, Chennai

Year , VenueJuly 2009 , IIT Madras, Chennai

Page Number171-178

Indexed INOthers

Vishal Mehta

Design Conceptualization And Kinematic Analysis Of Locomotion Gait For A Caterpillar-Inspired Robot

Journal

Journal NameAIP Conference Proceedings

Title of PaperDesign Conceptualization And Kinematic Analysis Of Locomotion Gait For A Caterpillar-Inspired Robot

PublisherAmerican Institute of Physics Inc.

Volume Number2946

Published YearNovember 2023

ISSN/ISBN No0094-243X

Indexed INScopus, Web of Science

Effect of longitudinal parameter on the vibration characteristics of unidirectional monolayer glass epoxy composite

Journal

Journal NameMaterials Today: Proceedings

Title of PaperEffect of longitudinal parameter on the vibration characteristics of unidirectional monolayer glass epoxy composite

PublisherElsevier Ltd

Volume Number59

Page Number683–691

Published YearJanuary 2022

ISSN/ISBN No22147853

Indexed INScopus, Web of Science

Effects of stacking sequences and longitudinal parameter on the dynamic characteristics of multilayer glass epoxy composite

Journal

Journal NameIOP Conference Series: Materials Science and Engineering

Title of PaperEffects of stacking sequences and longitudinal parameter on the dynamic characteristics of multilayer glass epoxy composite

PublisherIOP Publishing

Volume Number1228

Page Number1-11

Published YearJanuary 2022

ISSN/ISBN No1757-899X

Indexed INWeb of Science

Effect of Geometrical Shape on Axial Deformation of Soft Actuator

Journal

Journal NameJournal of Physics : Conference Series

Title of PaperEffect of Geometrical Shape on Axial Deformation of Soft Actuator

PublisherIOP Publishing Ltd

Volume Number2115

Page Number1-15

Published YearNovember 2021

ISSN/ISBN No17426588

Indexed INScopus

Stress Analysis of Finite Plate with Multiple Circular Hole

Conference

Title of PaperStress Analysis of Finite Plate with Multiple Circular Hole

Proceeding NameDesign, Analysis and Optimization in Mechanical Engineering (DAOME - 2016)

PublisherMechanical Engineering Department, Faculty of Technology and Engineering, The Maharaja Sayajirao University of Baroda.

Author NameVishal Mehta, Mihir Chauhan, Dharmendra Sharma

OrganizationMechanical Engineering Department, Faculty of Technology and Engineering, The Maharaja Sayajirao University of Baroda.

Year , VenueMarch 2016 , Mechanical Engineering Department, Faculty of Technology and Engineering, The Maharaja Sayajirao University of Baroda.

Page Number86-91

ISSN/ISBN No978-93-5258-831-2

Abstract

Muskhelishvili’s complex variable method is used with least square boundary collocation method to derive the stresses in a plate with hole. Generalized formulation is obtained for a square plate with centered circular hole. Plate with two holes and four holes are divided in to numbers of symmetric segments with a single circular hole. Applying different loading conditions and displacement

Publications

Ath Singhal

Development of novel low-speed open jet wind tunnel equipped with plenum chamber for testing of aero-rotors

Performance enhancement of solar flat plate collector with aluminium foil reflectors and trapezoidal glass cover

Improved cost-effective design of man-powered tricycle/rickshaw

Experimental optimization of a solar distillation unit

COMPARATIVE AND PARAMETRIC STUDY OF EFFECT OF EXHAUST GAS RECIRCULATION ON DIESEL AND BIODIESEL

DESIGNING AND MANUFACTURING OF CONTINUOUSLY VARIABLE TRANSMISSION (CVT)

Absar Lakdawala

LOW VOLTAGE SYSTEMS FOR ELECTRIC ATVS

ADAPTIVE INTERFACE-MESH UN-REFINEMENT (AIMUR) BASED SHARP-INTERFACE LEVEL-SET-METHOD FOR TWO-PHASE FLOW

A NUMERICAL STUDY ON BREAKUP OF A LIQUID JET IN AN AXIAL ELECTRIC FIELD

GENERATIVE DESIGN OF MAIN LANDING GEAR FOR A REMOTE-CONTROLLED AIRCRAFT

LATTICE BOLTZMANN METHOD BASED MODEL FOR FLUID FLOW SIMULATIONS

Design and FE analysis of chassis for solar powered vehicle

Topological optimization of wheel assembly components for all terrain vehicles

A numerical study on pulsatile non-Newtonian hemodynamics in double-fusiform abdominal aortic aneurysms

Advanced Engineering Materials

Application of optical techniques in sedimentation study of magnetorheological fluids

The examination, evaluation and comparison of corrosion effect on different metal surface by various crops based biodiesel

Methods for sedimentation study of magnetorheological fluids

Synthesis, characterization and applications of magnetorheological fluid

A numerical study on bubble dynamics in sinusoidal channels

A numerical study on bubble dynamics in sinusoidal channels

Altmetric Original Articles Coupled level-set and immersed-boundary method for simulation of filling in a complex geometry based mold

Coupled level-set and immersed-boundary method for simulation of filling in a complex geometry based mold

Hydrodynamic Analysis of Fish-Like Locomotion

Level Set Method based Study on Solidification During Casting: Effect of Advection and Filling Process

Study on tribological behavior of biodiesel – Diethyl ether (B20A4) blend for long run test on compression ignition engine

A dual grid, dual level set based cut cell immersed boundary approach for simulation of multi-phase ﬂow

Dual-Grid Level Set Method based CMFD Application for Solving Casting Filling and Solidification process

Experimental Investigation on Reduction of NOx Emission of Compression Ignition Engine Fueled with Bio-Diesel and Di-ethyl Ether (DEE)

CFD Analysis of Particle Laden Flow in a Cyclone Separator Using RANS and LES Methodology

Passive Flow Separation Control on a Cambered Airfoil Using Vortex Generator - A Numerical Approach

Numerical Analysis of Effect of Equivalence Ratio, Feed Stoke Composition and Particle Size on Performance of Down Draft Gasifier

Box-Behnken based Response Surface Methodology for Optimization of Operational Parameters of Compression Ignition Engine Fuelled with Blend of Diesel, Biodiesel and Diethyl Ether (DEE)

A Dual Grid Level Set Method based Study on Similarity and Difference between Interface Dynamics for Surface Tension and Radial Electric Field Induced Jet Breakup

Bio-Fuels for Compression Ignition Engine – A Review on Engine Performance, Emission and Life Cycle Analysis

Selection procedure of fin type and fin configuration for plate fin heat exchanger

Surface Roughness Analysis of Piston Assembly of CI Engine Fuelled with Diesel, Bio-diesel and Di ethyl Ether (DEE) During Long Term Endurance Test

Numerical Analysis on Effect of Baffle Inclination Angle on Flow and Heat Transfer Characteristic of Shell and Tube Heat Exchanger with Helical Baffle

Numerical Simulation and Modelling of Downdraft Gasifier

Mathematical Modeling and Simulation of Gypsum Drum Dryer

Identification of Energy Saving Potential of Different Thermal Insulation through Mathematical Modelling

Combustion Characteristic of Compression Ignition Engine using Bio-Diesel and Diethyl Ether (DEE)

On Dual Grid Level-Set Method for Computational-Electro-Multi-Fluid Dynamics Simulation

Break-up of a Non-Newtonian Jet Injected Downwards in a Newtonian Liquid

DGLSM based Study of Temporal Instability and Formation of Satellite in Capillary Jet Breakup

Numerical Simulation of Flow over Rotational and Transversely Oscillating Cylinder

Design and Optimization of Shell and Tube Heat Exchangers Using Genetic Algorithm

Numerical Investigation on Mechanism of Satellite Formation in Electrified Jet Breakup Using Dual Grid Level-Set Method

A dual grid level set method based study of interface-dynamics for a liquid jet injected upwards into another liquid

Numerical Study of Breakup of a Jet into Drops in Non-Newtonian Liquid – Liquid System

Effect of Biodiesel Blends on Performance of Compression Ignition Engine

Numerical Investigation of Flow Induced Vibration for the Triangular Array of Circular Cylinder

Numerical Study on Transition of Jet-Breakup Mode from Dripping to Tip Streaming in a Co-flowing Liquid Jet

Numerical Determination of Delay Period of Four-Stroke Compression Ignition Engine by Zero Dimensional Modeling

Comparison of Heat Transfer Enhancement in Tube in Tube Heat Exchanger Using Different Turbulent Generator

Critical Analysis of a Flow Induced Vibration in Cross Flow around Triangular Array of Circular Cylinder

Phenomenological Modelling of Four-Stroke Compression Ignition Engine Processes with Dissociation Effect

Numerical Investigation of Thermal Performance in Cross Flow around square array of circular cylinder

Study of Dynamic breakup of capillary jet using level set method

Numerical Investigation of Boundary Layer control over an airfoil

Development of Economical Viable vapour compression refrigeration cycle based domestic water heater

To present findings on potential of diethyl ether as supplementary fuel for CI engine

Computer Aided Design of Heat Exchanger

Modeling of Adiabatic Flame Combustion.

Anand Bhatt

Experimental Investigation on Determination of Optimum Filling Ratio in an Axially Grooved Heat Pipe with 16 Internal Grooves and Multiple Branches

Experimental investigations on novel orientation study on axially grooved heat pipe with two evaporators and one condenser with multiple branches

Parametric Study on Axially Grooved Heat Pipe With Two Heat Sources and One Heat Sink With Multiple Branches

Experimental Investigations on performance analysis of a wickless thermosiphon heat pipe with two heat sources and multiple branches

Experimental investigation on performance of low temperature multilayer insulation

Performance enhancement of solar flat plate collector with aluminium foil reflectors and trapezoidal glass cover

Improved cost-effective design of man-powered tricycle/rickshaw

Experimental optimization of a solar distillation unit

Comparison of various thermophysical property models of water-Al2O3nanofluids

Heat Transfer Analysis of 2-Stage G-M Cryocooler at 4 K Steady State Temperature for the Determination of its Capacity

Experimental Investigation on Thermal Conductivity of Powder Insulation with Aluminium Opacifier and Under Evacuation by using LN2 Boil-off Calorimeter

Anand Patel